Home› U.S. Coin Forum
Options

2 improperly annealed nickels from one box?

KurisuKurisu Posts: 2,234 ✭✭✭✭✭
edited July 9, 2023 1:48PM in U.S. Coin Forum

Not sure what my fascination with improperly annealed coins is...
But each time @FredWeinberg or someone else confirms them for me, my satisfaction and enjoyment with finding another one grows :blush:





Coins are Neato!

"If it's a penny for your thoughts and you put in your two cents worth, then someone...somewhere...is making a penny." - Steven Wright

«1

Comments

  • Options
    rickoricko Posts: 98,721 ✭✭✭✭✭

    Never collected these, but have seen several posted here over the years. Cheers, RickO

  • Options
    DCWDCW Posts: 7,940 ✭✭✭✭✭

    Boy, if these nickels are something special I would not be able to distinguish them from regular old circulated ones. What are the distinguishing features? The brownish tinge?

    Dead Cat Waltz Exonumia
    "Coin collecting for outcasts..."

  • Options
    BustHalfBrianBustHalfBrian Posts: 4,203 ✭✭✭✭

    How can you tell these were improperly annealed? The nickels I've seen with true improper annealing are much darker or show the clad layer peeled (or burnt) off.

    The coins you've posted just look like a couple of dirty nickels to me...

  • Options
    jmlanzafjmlanzaf Posts: 43,425 ✭✭✭✭✭

    @BustHalfBrian said:
    How can you tell these were improperly annealed? The nickels I've seen with true improper annealing are much darker or show the clad layer peeled (or burnt) off.

    The coins you've posted just look like a couple of dirty nickels to me...

    I vote "dirty" also.

    All comments reflect the opinion of the author, even when irrefutably accurate.

  • Options
    KurisuKurisu Posts: 2,234 ✭✭✭✭✭

    @jmlanzaf said:

    @BustHalfBrian said:
    How can you tell these were improperly annealed? The nickels I've seen with true improper annealing are much darker or show the clad layer peeled (or burnt) off.

    The coins you've posted just look like a couple of dirty nickels to me...

    I vote "dirty" also.

    That's why I post stuff here...because I want to learn more :blush:

    The reasons I think they're improperly annealed...

    Very nice luster under the speckled surface on both sides of both nickles.
    That speckling is also equal density on both sides of both nickles.
    The edges are shiny with some tiny areas of smoothed pitting that have some of that greyness in the pitting.
    My understanding is that the edges should be shiny from having most of that carbon scraped off by the collar during minting.

    Coins are Neato!

    "If it's a penny for your thoughts and you put in your two cents worth, then someone...somewhere...is making a penny." - Steven Wright

  • Options
    FredWeinbergFredWeinberg Posts: 6,055 ✭✭✭✭✭

    Those nickels are not examples of mis-annealed planchets

    Retired Collector & Dealer in Major Mint Error Coins & Currency since the 1960's.Co-Author of Whitman's "100 Greatest U.S. Mint Error Coins", and the Error Coin Encyclopedia, Vols., III & IV. Retired Authenticator for Major Mint Errors for PCGS. A 50+ Year PNG Member.A full-time numismatist since 1972, retired in 2022.
  • Options
    MarkKelleyMarkKelley Posts: 2,111 ✭✭✭✭✭

    @BustHalfBrian said:
    How can you tell these were improperly annealed? The nickels I've seen with true improper annealing are much darker or show the clad layer peeled (or burnt) off.

    The coins you've posted just look like a couple of dirty nickels to me...

    Jefferson nickels have no clad layer.

  • Options
    KurisuKurisu Posts: 2,234 ✭✭✭✭✭
    edited July 11, 2023 4:52PM

    @FredWeinberg said:
    Those nickels are not examples of mis-annealed planchets

    Thanks for checking Fred!

    Coins are Neato!

    "If it's a penny for your thoughts and you put in your two cents worth, then someone...somewhere...is making a penny." - Steven Wright

  • Options
    ConshyboyConshyboy Posts: 479 ✭✭✭✭

    Not familiar with the term anealed could someone please explain and thanks for educating me

  • Options

    Oxidative State I

    Primarily a collector of error coins over the next decade after collecting for 40 years. Have collected & studied every coin series in the Western Hemishere - yes - even ...
  • Options
    BruceSBruceS Posts: 1,590 ✭✭✭✭✭
    edited November 10, 2026 3:19PM

    Why are you bringing up these old threads, to make nonsensical remarks?

    Just curious 🤔

    eBay ID-bruceshort978
    Successful BST:here and ATS, bumanchu, wdrob, hashtag, KeeNoooo, mikej61, Yonico, Meltdown, BAJJERFAN, Excaliber, lordmarcovan, cucamongacoin, robkool, bradyc, tonedcointrader, mumu, Windycity, astrotrain, tizofthe, overdate, rwyarmch, mkman123, Timbuk3,GBurger717, airplanenut, coinkid855 ,illini420, michaeldixon, Weiss, Morpheus, Deepcoin, Collectorcoins, AUandAG, D.Schwager, blu62vette, morgan13, torinoCobra71, JWP, promethius88,
  • Options

    Just answering any IA question correctly now before I publish my paper next year on Improperly Annealed Errors. The first oxidative state I is the golden hue step. Here is the current model based on my current working hypothesis:

    Stage I: Golden Hue Improper Annealing

    Under the improper annealing model, the golden-hue stage represents the earliest visible expression of oxidation on an otherwise Mint State coin. At this point, the coin has been exposed to elevated temperatures during annealing, allowing a very thin oxide film to develop on the surface. The oxide layer remains relatively transparent and thin, permitting a substantial amount of the original mint luster to remain visible. As light interacts with this developing surface film, the coin can take on attractive golden, champagne, or pale amber coloration while still displaying strong cartwheel luster.

    Metallurgically, Stage I is interpreted as the beginning of surface oxidation rather than a fundamental change in the underlying alloy. The copper-rich areas nearest the surface begin reacting with oxygen, producing an extremely thin oxide film. Because the film is still limited in thickness, reflectivity remains high and the coin often appears fully original to collectors who are unfamiliar with improperly annealed errors. In many cases, the visual appearance can be mistaken for natural toning, particularly when the coin retains choice-to-gem quality surfaces.

    The strong luster present on high-grade examples can actually hinder recognition of the annealing effect. Bright reflected light tends to dominate the coin's appearance, masking the subtle color shift produced by early oxidation. A collector viewing a single specimen may simply see an attractive golden coin with original surfaces rather than recognizing it as the first stage of an oxidation sequence. This optical effect becomes even more pronounced when photographs are taken under direct lighting, where luster can overwhelm more subtle color differences.

    For this reason, side-by-side comparison with a normal example of the same issue is one of the most effective diagnostic tools. When examined next to a standard coin, the improperly annealed specimen frequently appears warmer, more golden, and slightly darker despite retaining equivalent luster. The comparison allows the observer to separate color effects from luster effects, making the oxidation stage easier to recognize. Without such a reference coin, the golden-hue stage can be surprisingly deceptive.

    In our working model, Stage I golden specimens represent the starting point of a progressive oxidation pathway that may eventually advance through amber and brown coloration before reaching the dark brown, gray, or black appearances observed in more heavily oxidized improperly annealed coins. Although the color is visually appealing and often accompanied by outstanding luster, the golden hue may be the first visible indication that oxidation has begun and that the coin occupies an early position within the improperly annealed spectrum rather than being simply a naturally toned example.

    John Lorenzo
    Numismatist USA

    Primarily a collector of error coins over the next decade after collecting for 40 years. Have collected & studied every coin series in the Western Hemishere - yes - even ...
  • Options
    JBKJBK Posts: 17,975 ✭✭✭✭✭

    You're off to a very bad start.

    Fred Weinberg had already stated that the two nickels shown "are not examples of mis-annealed planchets".

  • Options

    Fred Weinberg is WRONG. 100% certainty.

    Primarily a collector of error coins over the next decade after collecting for 40 years. Have collected & studied every coin series in the Western Hemishere - yes - even ...
  • Options

    Well 99% probability. The SEM/EDS data is still being generated.

    Primarily a collector of error coins over the next decade after collecting for 40 years. Have collected & studied every coin series in the Western Hemishere - yes - even ...
  • Options

    I do mention Fred Weinberg in the draft paper. I call it the Fred Weinberg principle. In some past PCGS post he indicates for a legitimate IA error make sure the outer clad layer EDGE or red stripe is red for it to be a legitimate IA error to confirm it has not been tampered with or is PMD. There are some exceptions to this principle. This is just for dimes to dollars and the outer clad layer has the same basic alloy composition as the Jefferson Nickel of 75% Cu/25%Ni.

    Primarily a collector of error coins over the next decade after collecting for 40 years. Have collected & studied every coin series in the Western Hemishere - yes - even ...
  • Options
    MsMorrisineMsMorrisine Posts: 40,337 ✭✭✭✭✭

    sem?
    eds?

    Current maintainer of Stone's Master List of Favorite Websites // My BST transactions
  • Options

    Fred Weinberg does not give a reason they are not IA. Again - I could be wrong but generating these posts so the study is on solid ground. Hard to imagine the golden hues are not the first oxidation state of IA errors. Do they just go from original surfaces to black instaneously in the annealing furnaces?

    Primarily a collector of error coins over the next decade after collecting for 40 years. Have collected & studied every coin series in the Western Hemishere - yes - even ...
  • Options
    MsMorrisineMsMorrisine Posts: 40,337 ✭✭✭✭✭

    if you don't know, why are you writing a paper?

    i'd imagine this is a black and white. it's not terminal toning. the metal turned black

    Current maintainer of Stone's Master List of Favorite Websites // My BST transactions
  • Options

    MsMorrisine - SEM/EDS can be used to investigate the different oxidative states associated with improperly annealed (IA) coin errors by comparing the chemistry and surface morphology of normal, gold, red, brown, and black regions. Although EDS cannot directly identify specific oxide compounds, it can measure oxygen enrichment and changes in elemental ratios, particularly the Cu/O ratio, which are expected to vary as oxidation progresses. Areas representing more advanced oxidation should generally exhibit higher oxygen levels, lower Cu/O ratios, rougher surface textures, stronger grain-boundary expression, and more developed oxide structures under SEM imaging. By documenting these chemical and morphological trends across color transitions, SEM/EDS can help determine whether IA coloration reflects a progressive oxidation sequence produced during annealing rather than differences in the underlying alloy composition.

    Primarily a collector of error coins over the next decade after collecting for 40 years. Have collected & studied every coin series in the Western Hemishere - yes - even ...
  • Options

    Any other concerns or questions???

    Primarily a collector of error coins over the next decade after collecting for 40 years. Have collected & studied every coin series in the Western Hemishere - yes - even ...
  • Options
    MsMorrisineMsMorrisine Posts: 40,337 ✭✭✭✭✭

    sem?
    eds?

    Current maintainer of Stone's Master List of Favorite Websites // My BST transactions
  • Options

    Scanning Electron Microscopy (SEM) coupled with Energy-Dispersive X-ray Spectroscopy (EDS) is an analytical technique that combines high-magnification imaging with elemental analysis. SEM uses a focused electron beam to produce detailed images of a specimen's surface, revealing features such as grain structure, surface roughness, oxide growth, cracks, and other microscopic characteristics. EDS, attached to the SEM, detects characteristic X-rays emitted from the sample and identifies the elements present, providing qualitative and quantitative chemical data. Together, SEM/EDS allows researchers to examine both the morphology and elemental composition of a coin's surface, making it particularly useful for investigating alloy segregation, oxidation patterns, corrosion, improper annealing effects, and other metallurgical phenomena in numismatic studies.

    Primarily a collector of error coins over the next decade after collecting for 40 years. Have collected & studied every coin series in the Western Hemishere - yes - even ...
  • Options

    Next question.

    Primarily a collector of error coins over the next decade after collecting for 40 years. Have collected & studied every coin series in the Western Hemishere - yes - even ...
  • Options

    In the interim go to Eric P. Newman portal and see my past studies with this technique. Put SEM/EDS in the SEARCH BOX. Will check back tomorrow and answer all your inquires. Again just looking for new ideas, correct current information, etc.

    Primarily a collector of error coins over the next decade after collecting for 40 years. Have collected & studied every coin series in the Western Hemishere - yes - even ...
  • Options
    JBKJBK Posts: 17,975 ✭✭✭✭✭

    I believe Fred.

  • Options

    Thanks for your time moving forward here.

    Primarily a collector of error coins over the next decade after collecting for 40 years. Have collected & studied every coin series in the Western Hemishere - yes - even ...
  • Options
    MsMorrisineMsMorrisine Posts: 40,337 ✭✭✭✭✭

    so, you have multiple coins in varying states of annealing and have performed examinations of the surfaces to show the properties of the differing states?

    Current maintainer of Stone's Master List of Favorite Websites // My BST transactions
  • Options
    RogerBRogerB Posts: 9,001 ✭✭✭✭✭

    Before everyone runs off the rails, please post a clear definition of "improperly annealed" as it relates to U.S. copper-nickel alloy coinage.

    Thanks! :)

  • Options

    Correct. Research still progressing. In metallurgy its called the "Color Oxidation Pathway: "The gradual change in a coin's color as the metal surface reacts with oxygen over time or during heating. As oxidation increases, the color typically progresses from the original metal color to gold, red, brown, and eventually dark brown or black. Different colors represent different stages of surface oxidation, meaning two areas of the same coin can appear different simply because one area has oxidized further than the other.

    Primarily a collector of error coins over the next decade after collecting for 40 years. Have collected & studied every coin series in the Western Hemishere - yes - even ...
  • Options

    Paper to be completed in April/May 2027. Making inquires within the numismatic fraternity as errors are not mine main expertise. So far no real discrepancies in the model.

    Primarily a collector of error coins over the next decade after collecting for 40 years. Have collected & studied every coin series in the Western Hemishere - yes - even ...
  • Options
    MsMorrisineMsMorrisine Posts: 40,337 ✭✭✭✭✭

    and, while the whole coin is being annealed inside the same place for th same amount of time, how does one area oxidize further than another?

    Current maintainer of Stone's Master List of Favorite Websites // My BST transactions
  • Options

    Gold hue is the first oxidative state primarily from cuprous oxide followed by cupric oxide. Forming actually a proposed bilayer oxidative zone we see in these IA errors with black bullseyes. Yes bilayer oxidative areas of cupric oxide over cuprous oxide. Next inquiry?

    Primarily a collector of error coins over the next decade after collecting for 40 years. Have collected & studied every coin series in the Western Hemishere - yes - even ...
  • Options
    RogerBRogerB Posts: 9,001 ✭✭✭✭✭
    edited November 11, 2026 6:42AM

    Here is a summary of Cu-Ni alloy oxidation based on brief on-line articles. There is a large body of scientific and industrial research available.

    High-Temperature Atmospheric Oxidation

    When exposed to air at elevated temperatures, 75/25 cupronickel forms a classic duplex (two-layered) oxide scale driven by the higher mobility and outward diffusion rate of copper ions: [https://chavascience.com/en/hydrogen/oxidation-of-copper-nickel-alloy].

    • Outer Layer (Copper-Rich Oxide): The outermost surface of the scale consists predominantly of cupric oxide (CuO) or cuprous oxide (Cu₂O). Because copper ions diffuse outward much faster than nickel ions can migrate, they overtake the surface, giving heavily oxidized 75/25 alloy a dark, copper-like outer appearance. [op. cit.; https://www.researchgate.net/publication/226548470_Oxidation_Mechanisms_of_Copper_and_Nickel_Coated_Carbon_Fibers]
    • Inner Layer (Mixed Oxide Barrier): Directly beneath the outer copper oxide lies a porous, protective sub-layer containing a mixture of nickel oxide (NiO) and Cu₂O. The NiO acts as a roadblock, slowing down the further ingress of oxygen into the bulk metal. [op.cit]
    • Scale Adhesion Limits: Below roughly 1050°C, this oxide layer does not strongly adhere to the core and can easily fracture under mechanical stress. Above 1050°C, the oxides begin to sinter, resulting in a rough outer surface that sticks tightly to the remaining metal alloy core. [op. cit.]

    Normal heat treatment of 75/25 excludes air and is limited to soft annealing (“recrystallization annealing”) and stress relief (“stress relief annealing”). For coinage recrystallization annealing is appropriate

    Recrystallization Annealing (Soft Annealing)
    • Purpose: To soften cold-worked material, remove the effects of work hardening, and restore full ductility.
    • Temperature Range: 620°C to 900°C, depending on the amount of prior cold work.
    • Time at Temperature: Usually 30 minutes, depending on mass and uniform heat exposure.
    • Cooling: Air cooling or water quenching is acceptable.
    Stress-Relief Annealing
    • Purpose: To reduce residual stresses from machining, forming, or welding without causing full grain recrystallization.
    • Temperature Range: 280°C to 500°C.
    • Cooling: Slow cool in air.
    Atmosphere and Protection
    • Environment: Heat treatments should ideally be performed in a controlled, air-free, vacuum, or slightly reducing atmosphere (such as dissociated ammonia or hydrogen-nitrogen mixes).
    • Preventing Oxidation: Heating in open air can cause oxide scale or discoloration, which usually requires pickling or chemical cleaning afterward.

    Soooo......how about a generally accepted numismatic description of "improper annealing" of CuNi planchets? :wink:

  • Options
    RogerBRogerB Posts: 9,001 ✭✭✭✭✭
    edited November 11, 2026 8:54AM

    .

  • Options

    Thanks Roger Burdette I include your Sintered Book in my study to explain Sintered and I am already aware of the dual role of CuO& CuO2 in this metallurgy. Thanks!

    Primarily a collector of error coins over the next decade after collecting for 40 years. Have collected & studied every coin series in the Western Hemishere - yes - even ...
  • Options

    You are Roger Burdette? LOL

    Primarily a collector of error coins over the next decade after collecting for 40 years. Have collected & studied every coin series in the Western Hemishere - yes - even ...
  • Options
    KurisuKurisu Posts: 2,234 ✭✭✭✭✭

    @colonialjohn said:
    Fred Weinberg is WRONG. 100% certainty.

    I just posted them, graded by ANACS in your newer thread...Fred was 100% correct.
    They came back as improper alloy.
    https://forums.collectors.com/discussion/comment/14183311#Comment_14183311

    Coins are Neato!

    "If it's a penny for your thoughts and you put in your two cents worth, then someone...somewhere...is making a penny." - Steven Wright

  • Options

    Commented. Agree Fred is 100% correct although as RB has pointed out what happens before oxidation State III with copper oxide and cuprous oxide in the surface chemistry of a Cu/Ni binary alloy whether a Jefferson Nickel or outer clad layer of the same composition in earlier oxidation states from original surfaces to brown or is brown the initial oxidative state coming out of a U.S. Mint furnace annealing oven?

    Primarily a collector of error coins over the next decade after collecting for 40 years. Have collected & studied every coin series in the Western Hemishere - yes - even ...
  • Options
    RogerBRogerB Posts: 9,001 ✭✭✭✭✭

    @colonialjohn said:
    You are Roger Burdette? LOL

    That's what it says on my rabies tattoo..... :)

  • Options
    RedRocketRedRocket Posts: 2,077 ✭✭✭✭✭

    @colonialjohn said:
    Fred Weinberg is WRONG. 100% certainty.

    @colonialjohn said:
    Commented. Agree Fred is 100% correct .

    All we need in understanding @colonialjohn reputation.

  • Options

    Mike Diamond, Fred Weinberg, Jon Sullivan ... anybody out there?

    Primarily a collector of error coins over the next decade after collecting for 40 years. Have collected & studied every coin series in the Western Hemishere - yes - even ...
  • Options

    He is right on the ANACS holders - wrong on denouncing the golden hue on the nickel as not IA error RedPocket.

    Primarily a collector of error coins over the next decade after collecting for 40 years. Have collected & studied every coin series in the Western Hemishere - yes - even ...
  • Options
    ricarf2386ricarf2386 Posts: 290 ✭✭✭

    @colonialjohn said:
    Mike Diamond, Fred Weinberg, Jon Sullivan ... anybody out there?

    Just a heads up, John—you missed the @ symbol with no spaces so the forum notifies them: @FredWeinberg, @JonSullivan, and @MikeDiamond.

  • Options
    RedRocketRedRocket Posts: 2,077 ✭✭✭✭✭

    @colonialjohn said:
    He is right on the ANACS holders - wrong on denouncing the golden hue on the nickel as not IA error RedPocket.

    Here is a bit of a stretch for you when it comes to critical thinking. . . Perhaps he was right on both occasions?

  • Options

    Just seeing if this analysis model before working with Michigan State University's Materials Lab has any holes in it - so far from my perspective it looks good. Roger Burdette references confirm the golden hue as an early oxidation state and they do appear on the coins and IMO are mint generated. SEM/EDS will back this hue up as mint caused and not environmental PMD tone.

    Primarily a collector of error coins over the next decade after collecting for 40 years. Have collected & studied every coin series in the Western Hemishere - yes - even ...
  • Options
    RogerBRogerB Posts: 9,001 ✭✭✭✭✭

    Surface discoloration can occur from many causes, and is not, alone, sufficient evidence of defective annealing or other heat treatment at a US Mint.

  • Options

    Surface discoloration can occur from many causes and, by itself, does not prove improper annealing or any other Mint-related heat-treatment error. Accordingly, this study relies on SEM/EDS and XRF analysis rather than visual appearance alone. The objective is to determine whether the observed colors are associated with a metallurgical oxidation process originating during manufacture or with post-mint damage (PMD) and environmental exposure. Color is treated as an observation, while elemental composition and surface morphology provide the primary evidence.

    SEM/EDS is especially valuable because it analyzes the outermost surface where oxidation and corrosion occur. Areas of discoloration will be compared with normal-colored areas on the same coin to evaluate oxygen content, Cu/O ratios, and the presence of contamination elements such as sulfur (S) and chlorine (Cl). A surface showing elevated oxygen with a systematic progression in Cu/O ratios and little or no sulfur or chlorine would be more consistent with a controlled oxidation process such as improper annealing. In contrast, significant sulfur or chlorine enrichment, localized corrosion products, deposits, pitting, or irregular surface attack would favor environmental exposure or other forms of PMD. SEM imaging will also document surface texture, allowing comparison between uniform oxide films and corrosion-related surface deterioration.

    XRF serves a complementary role by examining a much larger volume of material beneath the immediate surface. If discoloration is primarily the result of surface oxidation, the bulk alloy composition should remain essentially unchanged across the coin. XRF can therefore verify whether unusual coloration is associated with normal alloy chemistry or with external contamination. When SEM/EDS and XRF results are considered together, a consistent pattern of oxygen enrichment with otherwise normal alloy composition would support an oxidation-based explanation, while evidence of contaminant elements, corrosion products, or chemical residues would support environmental toning or PMD.

    By integrating visual examination, SEM/EDS elemental analysis, Cu/O ratio comparisons, sulfur and chlorine screening, and XRF alloy verification, this study seeks to distinguish Mint-related oxidation phenomena from post-mint environmental effects. The final interpretation will be based on the totality of the metallurgical evidence rather than color alone.

    Primarily a collector of error coins over the next decade after collecting for 40 years. Have collected & studied every coin series in the Western Hemishere - yes - even ...
  • Options
    RogerBRogerB Posts: 9,001 ✭✭✭✭✭

    ....and what about post manufacture heating of CuNi alloy? How is that identified?

  • Options

    In this analysis model, post-manufacture heating (PMD heating) of a Cu-Ni clad coin would be expected to produce many of the same oxide colors seen in genuine improperly annealed coins because the underlying metallurgical process is still oxidation. The distinction is not necessarily the color itself, but the distribution, surface condition, and supporting diagnostics. PMD-heated coins may show uneven color transitions, localized hot spots, heat concentration near rims or high points, disruption of luster, impaired flow lines, surface residues, or evidence of handling after oxidation occurred. In contrast, a genuine improperly annealed planchet should exhibit a more uniform, planchet-wide oxidation pattern that formed before striking and therefore remains integrated with the original mint surface, often preserving strong cartwheel luster and natural color continuity across protected recesses, open fields, and other design elements.

    Accordingly, PMD and tampering are not excluded from the model but rather treated as competing hypotheses. A coin would be considered suspicious if its color pattern conflicts with expected Mint-produced oxidation behavior, if the edge diagnostics are inconsistent with the Weinberg principle, if sulfur or chlorine contamination is detected, if corrosion products or residues are present, or if stereomicroscopy reveals surface alteration inconsistent with original Mint surfaces. SEM/EDS and XRF are therefore used not simply to identify oxidation, but to determine whether that oxidation appears to be part of a coherent Mint-origin pathway or the result of later environmental exposure, artificial heating, chemical treatment, or other post-mint alteration. Under this framework, color alone never proves improper annealing; attribution requires a combination of color, luster, edge characteristics, surface morphology, and elemental evidence.

    Weinberg Principle: One of the key principles emphasized by error specialist Fred Weinberg is that a properly attributed improperly annealed reeded-edge clad coin will usually retain evidence of its original copper-core construction along the edge. This typically appears as the familiar reddish copper stripe visible between the outer copper-nickel clad layers. Even when the obverse and reverse develop gold, amber, red, or brown coloration from defective annealing, traces of the red edge stripe commonly remain visible under stereomicroscopic examination.

    The reasoning is that improper annealing primarily affects the outer clad layers, while the copper core remains identifiable along the edge. In addition, the reeding and collar-striking process often creates minor scraping, drag marks, and exposed copper areas that help preserve evidence of the original copper-core stripe. Therefore, the presence of a visible red edge stripe is considered supportive evidence of a genuine improperly annealed clad planchet.

    An important exception occurs in advanced oxidation states. As oxidation progresses into dark brown, dark gray, and black stages, oxide growth may partially overprint the red stripe and cause portions of the edge to assume the same dark coloration seen on the obverse and reverse. However, stereomicroscopic examination will often still reveal remnants of the underlying copper-core stripe. This principle applies specifically to reeded-edge clad coinage such as quarters, dimes, half dollars, and Susan B. Anthony dollars. It does not apply to smooth-edge coins such as Jefferson nickels, where the edge is composed of the same alloy as the faces and is therefore expected to exhibit the same color hue and oxidation state as the obverse and reverse surfaces.

    Primarily a collector of error coins over the next decade after collecting for 40 years. Have collected & studied every coin series in the Western Hemishere - yes - even ...

Leave a Comment

BoldItalicStrikethroughOrdered listUnordered list
Emoji
Image
Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights
Drop image/file