A Capital Plastics Photo Thread

Options
2

Comments

  • 1946Hamm
    1946Hamm Posts: 827 ✭✭✭✭✭
    Options

    I have 115 Capital holders with 50 complete set holders.

    Have a good day, Gary
  • braddick
    braddick Posts: 25,183 ✭✭✭✭✭
    Options

    @1946Hamm said:
    I have 115 Capital holders with 50 complete set holders.

    :o

    Amazing!
    Would love to see even just a couple of your favorites.

  • USSID18
    USSID18 Posts: 652 ✭✭✭✭
    edited May 11, 2026 11:36AM
    Options

    Have you guys ever considered using aluminum or brass rivets?.. Although the original plastic rivets yellow over time, do you still prefer them?

  • johnny9434
    johnny9434 Posts: 34,049 ✭✭✭✭✭
    Options

    One i had seen was cool. It had all 7 1947 Canadian dollar varities and fish i coulda brought it. Anyway ...

  • ADG
    ADG Posts: 483 ✭✭✭
    Options

    @USSID18 said:
    Have you guys ever considered using aluminum or brass rivets?.. Although the original plastic rivets yellow over time, do you still prefer them?

    Yes. Easy to get these Chicago screws in black/gold/white/etc. Use whatever looks best for your holder. For me the original screws also very fragile, break easily if tightened too much.

    "Some people say Citizen Kane or Casablanca. I say 'Jason and the Argonauts' is the greatest movie ever made.” Tom Hanks at The Oscars' Science & Technical Awards Ceremony for Ray Harryhausen, 1992

  • braddick
    braddick Posts: 25,183 ✭✭✭✭✭
    Options

    @ADG said:

    @USSID18 said:
    Have you guys ever considered using aluminum or brass rivets?.. Although the original plastic rivets yellow over time, do you still prefer them?

    Yes. Easy to get these Chicago screws in black/gold/white/etc. Use whatever looks best for your holder. For me the original screws also very fragile, break easily if tightened too much.

    Here is a related thread.
    Within this thread it speaks of the metal replacement screws being available on Amazon.
    https://forums.collectors.com/discussion/1100708/capital-plastics-coin-holders

  • johnny9434
    johnny9434 Posts: 34,049 ✭✭✭✭✭
    Options

    Lotta fun plastic out there. Hope we see more here

  • tokenpro
    tokenpro Posts: 940 ✭✭✭✭✭
    Options

    I remember all of the custom cut Capital holders similar to the Lincoln head shown above. I recall seeing shields for shield nickels and Civil War tokens (the hoard of Greenleaf - St. Paul MN CWTs were in a shield), waving flags, cars & ships, various state outlines, animals (Buffs) and so many more for competitive displays and topical collections. I recall once having a mini-hoard of Iowa commems in various color Iowa shaped holders and a small group of USS Monitor CWTs in an ironclad shaped holder.

  • oldabeintx
    oldabeintx Posts: 3,214 ✭✭✭✭✭
    Options

    That 09 cents set is very cool.

  • oldabeintx
    oldabeintx Posts: 3,214 ✭✭✭✭✭
    Options

    @braddick said:
    Decided to pull out some neat looking nickels and place them within this Capital Plastics holder.
    All are lustrous, not showing up on the photos.
    (I don't own a half dime that matches, unfortunately so would rather leave that spot empty.)


    Odd plastic. The half dime not being a nickel and all. 3 cent piece?

  • johnny9434
    johnny9434 Posts: 34,049 ✭✭✭✭✭
    Options


    Will work on a nice fill for this one

  • Goob
    Goob Posts: 576 ✭✭✭✭✭
    Options

    @privatecoin said:
    Finished another set today.


    Congrats, that’s a good looking set!

    "Another day, another Collectors Universe forum scrolling session."
    - Someone, probably

  • Cladiator
    Cladiator Posts: 18,353 ✭✭✭✭✭
    Options

    Love this thread. <3

  • Matt04
    Matt04 Posts: 620 ✭✭✭✭
    Options

    Waiting on @TomB for the monster toner WQ's !!

  • GAC
    GAC Posts: 43 ✭✭✭
    Options

  • johnny9434
    johnny9434 Posts: 34,049 ✭✭✭✭✭
    edited July 1, 2026 11:45AM
    Options

    @Eighteen63 said:

    Cool and it all fits together, I Iike

  • oldabeintx
    oldabeintx Posts: 3,214 ✭✭✭✭✭
    Options

    Dang. I sure miss filling those holders.

  • oldabeintx
    oldabeintx Posts: 3,214 ✭✭✭✭✭
    Options

    @Goob said:
    Here are some photos before I sent this to PCGS, it used to be in a Capitol Plastics case! (Around 2023-2024)


    Post-submission photos:

    64 is a really nice value grade for walkers. Lustrous.

  • Eighteen63
    Eighteen63 Posts: 136 ✭✭✭✭
    Options

    My West Point Mint set

    On the contrary, Google is not your friend.

  • CaptHenway
    CaptHenway Posts: 34,164 ✭✭✭✭✭
    Options

    @johnny9434 said:

    I will bet that they did not make a lot of this holder!

    Professional Numismatist, Retired. 55 year member ANA. Former ANA Senior Authenticator. Winner of four ANA Heath Literary Awards; three Wayte and Olga Raymond Literary Awards; Numismatist of the Year Award 2009, and ANA Lifetime Achievement Award 2020. Winner of the PNG's 2026 Robert Friedberg Award for "The Enigmatic Lincoln Cents of 1922," Available now from Whitman or Amazon.
  • johnny9434
    johnny9434 Posts: 34,049 ✭✭✭✭✭
    Options

    @CaptHenway said:

    @johnny9434 said:

    I will bet that they did not make a lot of this holder!

    i brought this way and yes, i never have seen another one. got this off a dealer who liked newfoundland stuff like this

  • CaptHenway
    CaptHenway Posts: 34,164 ✭✭✭✭✭
    Options

    @Gonfunko said:

    I would bet you that this was custom made for somebody who wanted to exhibit his set at Coin Shows.

    Professional Numismatist, Retired. 55 year member ANA. Former ANA Senior Authenticator. Winner of four ANA Heath Literary Awards; three Wayte and Olga Raymond Literary Awards; Numismatist of the Year Award 2009, and ANA Lifetime Achievement Award 2020. Winner of the PNG's 2026 Robert Friedberg Award for "The Enigmatic Lincoln Cents of 1922," Available now from Whitman or Amazon.
  • Gonfunko
    Gonfunko Posts: 1,487 ✭✭✭
    Options

    @CaptHenway said:

    @Gonfunko said:
    ...

    I would bet you that this was custom made for somebody who wanted to exhibit his set at Coin Shows.

    Very possibly! I'm nearly certain it's a one-off considering how small the collector base for these is. Would be amazing to find a star-shaped partner board for the silvers, but that would be an even tougher set to put together.

  • johnny9434
    johnny9434 Posts: 34,049 ✭✭✭✭✭
    Options

    @johnny9434 said:

    @CaptHenway said:

    @johnny9434 said:

    I will bet that they did not make a lot of this holder!

    i brought this way and yes, i never have seen another one. got this off a dealer who liked newfoundland stuff like this

    Supply and demand has a role here as well, maybe that's why fwiw 👍

  • carabonnair
    carabonnair Posts: 1,481 ✭✭✭✭✭
    Options

    The last S-Mint coins of the 1950's

  • CaptHenway
    CaptHenway Posts: 34,164 ✭✭✭✭✭
    Options

    Nice!

    Professional Numismatist, Retired. 55 year member ANA. Former ANA Senior Authenticator. Winner of four ANA Heath Literary Awards; three Wayte and Olga Raymond Literary Awards; Numismatist of the Year Award 2009, and ANA Lifetime Achievement Award 2020. Winner of the PNG's 2026 Robert Friedberg Award for "The Enigmatic Lincoln Cents of 1922," Available now from Whitman or Amazon.
  • johnny9434
    johnny9434 Posts: 34,049 ✭✭✭✭✭
    Options



    Been in this sinse I got it back in 99. Meh, ok (old pics posted before)

  • CircOnly
    CircOnly Posts: 2,222 ✭✭✭✭
    Options

    That Barber Half set is wonderful! @JBN

Leave a Comment

BoldItalicStrikethroughOrdered listUnordered list
Emoji
Image
Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights
Drop image/file