Home U.S. Coin Forum
Options

The Best Example Of An Aluminum Finger Feeder Error

ctf_error_coinsctf_error_coins Posts: 15,433 ✭✭✭✭✭
edited April 8, 2023 9:57AM in U.S. Coin Forum

This is the nicest example of an aluminum finger feed error that I have ever seen.

When I saw this example, I had have it, went after it hard, and won this coin.

The coin is even nicer than I expected.

Post your finger feeder error coins if you have them.

Comments

  • Options
    Steven59Steven59 Posts: 11,012 ✭✭✭✭✭

    Don't see those very often - great addition!

    "When they can't find anything wrong with you, they create it!"

  • Options
    FredWeinbergFredWeinberg Posts: 6,026 ✭✭✭✭✭

    I agree – one of the best I’ve seen -shows the vast majority of both sides of the coin and the tip of the feet or finger, which I like on these types of examples

    Looks like it’s at least triple struck if not quad struck two distinct strikes, and 1 to 2 closely overlapped strikes

    Great air, and congrats on the acquisition

    Retired Collector & Dealer in Major Mint Error Coins & Currency since the 1960's.Co-Author of Whitman's "100 Greatest U.S. Mint Error Coins", and the Error Coin Encyclopedia, Vols., III & IV. Retired Authenticator for Major Mint Errors for PCGS. A 50+ Year PNG Member.A full-time numismatist since 1972, retired in 2022.
  • Options
    jmlanzafjmlanzaf Posts: 41,196 ✭✭✭✭✭

    Hmmm...MS65 when struck on a feeder finger? How do we know what it is supposed to look like when not struck on a planchet?

    All comments reflect the opinion of the author, even when irrefutably accurate.

  • Options
    ctf_error_coinsctf_error_coins Posts: 15,433 ✭✭✭✭✭

    @jmlanzaf said:
    Hmmm...MS65 when struck on a feeder finger? How do we know what it is supposed to look like when not struck on a planchet?

    Graded like any other coin. This one is clearly MS65.

  • Options
    Shane6596Shane6596 Posts: 759 ✭✭✭✭✭

    Only finger feeders i got...

    Cool coin.

    Successful BST transactions with....Coinslave87, ChrisH821, Walkerguy21D, SanctionII.......................Received "You Suck" award 02/18/23

  • Options
    MarkKelleyMarkKelley Posts: 2,079 ✭✭✭✭✭

    I have an issue with calling it a coin, but I like it.

  • Options
    ctf_error_coinsctf_error_coins Posts: 15,433 ✭✭✭✭✭
    edited April 8, 2023 11:42AM

    @MarkKelley said:
    I have an issue with calling it a coin, but I like it.

    I guess it depends on whether it was monetized or not :D:o;)

  • Options
    MedalCollectorMedalCollector Posts: 2,078 ✭✭✭✭✭

    There are many spectacular feeder finger error coins on south american coinage. They are far superior to US feeder finger errors.

  • Options
    ctf_error_coinsctf_error_coins Posts: 15,433 ✭✭✭✭✭

    @GoldenEgg said:
    There are many spectacular feeder finger error coins on south american coinage. They are far superior to US feeder finger errors.

    Thanks for the info but this is the US Coin Forum :)

  • Options
    ZoinsZoins Posts: 34,461 ✭✭✭✭✭
    edited April 8, 2023 12:55PM

    @ctf_error_coins said:

    @GoldenEgg said:
    There are many spectacular feeder finger error coins on south american coinage. They are far superior to US feeder finger errors.

    Thanks for the info but this is the US Coin Forum :)

    From what I've seen, it seems they could qualify if they were struck by the US Mint ;)

    Of course, we need photos!

  • Options
    ZoinsZoins Posts: 34,461 ✭✭✭✭✭
    edited April 8, 2023 1:22PM

    Very strong strike on the feeder finger error Chris!

    Since it was struck multiple times, I wonder if the multiple strikes were done at separate times? It's neat to think about feeder finger being struck several times, over say months before a final strike causing it to break off.

    And since I love pedigrees, it's great to mention the OP coin is from the notable Michael Sussman collection!

  • Options
    NumisOxideNumisOxide Posts: 11,037 ✭✭✭✭✭

    That is pretty cool!!

  • Options
    silverpopsilverpop Posts: 6,933 ✭✭✭✭✭

    B) error coin

    ABANDONED

  • Options
    ZoinsZoins Posts: 34,461 ✭✭✭✭✭

    It's great that the person who discovered these is on the forums :)

    This is from Mike @Byers:

    @Byers said:
    In 1999 I discovered a small group of U.S. coins struck on aluminum scrap. These were unknown to the numismatic community since this was a new type of major mint error. This group contained a few State Quarters, one Kennedy Half, one SBA Dollar, several Sacagawea Dollars and one pre-state quarter (eagle reverse). After a tour of the U.S. Mint at Philadelphia, it was determined that the minting process had changed to some degree. One of the changes was that "feeder fingers" were used during the striking of all denominations of U.S. coins. Coins from all modern denominations have been discovered that were struck on the tips of these feeder fingers.

    Offered here is the only known pre-state quarter with the eagle on the reverse, multi-struck on the end of a feeder finger. It is larger than the diameter of a Half Dollar, twice as thick, shows two ends of the feeder finger, is fully struck and in gem mint state condition. There is one other pre-state quarter with an eagle reverse, struck on a small piece of feeder finger scrap. It is dated 1993, is very small, not dramatic and does not show any part of the feeder finger tip.

    There are approximately 40-50 State Quarters struck on feeder fingers. U.S. coins struck on feeder fingers have sold in Heritage auctions for as high as $10,925 for a Sacagawea Dollar and $8,050 for a Madison Dollar. I sold the SBA Dollar feeder finger for $10,000 and two of the State Quarters for $8,000 each. This specific pre-state quarter multi-struck on a feeder finger is exciting since it is the only known full-size pre-state quarter and is many times rarer than a State Quarter struck on a feeder finger.

    Ref: https://mikebyers.com/1703056-008.html

  • Options
    JimnightJimnight Posts: 10,846 ✭✭✭✭✭

    Very nice error Chris, first one I've seen like this.

  • Options
    ByersByers Posts: 1,936 ✭✭✭✭✭

    Here are a few from the original discovery group that I had:

    mikebyers.com Dealer in Major Mint Errors, Die Trials & Patterns - Author of NLG Best World Coin Book World's Greatest Mint Errors - Publisher & Editor of minterrornews.com.
  • Options
    NumisOxideNumisOxide Posts: 11,037 ✭✭✭✭✭

    @Byers said:
    Here are a few from the original discovery group that I had:

    I'm curious the story behind how these were found?

  • Options
    ZoinsZoins Posts: 34,461 ✭✭✭✭✭

    @NumisOxide said:

    @Byers said:
    Here are a few from the original discovery group that I had:

    I'm curious the story behind how these were found?

    Coinstar reject tray? :D

  • Options
    ZoinsZoins Posts: 34,461 ✭✭✭✭✭
    edited April 8, 2023 4:15PM

    @Byers said:
    Here are a few from the original discovery group that I had:

    Very cool! So the 1998-P Eagle reverse is from the original discovery batch!

  • Options
    jmlanzafjmlanzaf Posts: 41,196 ✭✭✭✭✭
    edited April 8, 2023 4:32PM

    @ctf_error_coins said:

    @jmlanzaf said:
    Hmmm...MS65 when struck on a feeder finger? How do we know what it is supposed to look like when not struck on a planchet?

    Graded like any other coin. This one is clearly MS65.

    I don't think that would grade 65 on a regular planchet. I mean, I'm sure it is uncirculated. But there are a lot of marks on the "planchet" and grease. And you've got the 2nd and 3rd strike wiping out elements of the first strike. Just seems like it is hard to grade it "like any other coin".

    All comments reflect the opinion of the author, even when irrefutably accurate.

  • Options
    gumby1234gumby1234 Posts: 5,901 ✭✭✭✭✭

    @Zoins posted a really cool one multiple struck by Roosevelt dime dies a while ago. I think it was better than the ones in this thread.

    Successful BST with ad4400, Kccoin, lablover, pointfivezero, koynekwest, jwitten, coin22lover, HalfDimeDude, erwindoc, jyzskowsi, COINS MAKE CENTS, AlanSki, BryceM

  • Options
    ZoinsZoins Posts: 34,461 ✭✭✭✭✭

    @gumby1234 said:
    @Zoins posted a really cool one multiple struck by Roosevelt dime dies a while ago. I think it was better than the ones in this thread.

    That was a PCGS MS64 and had nice separation between the strikes. Here it is:

    https://forums.collectors.com/discussion/1084507/the-jokers-laughing-gas-strikes#latest

  • Options
    gumby1234gumby1234 Posts: 5,901 ✭✭✭✭✭

    @Zoins it may be technically graded lower, but that is way nicer. So cool

    Successful BST with ad4400, Kccoin, lablover, pointfivezero, koynekwest, jwitten, coin22lover, HalfDimeDude, erwindoc, jyzskowsi, COINS MAKE CENTS, AlanSki, BryceM

  • Options
    Namvet69Namvet69 Posts: 9,408 ✭✭✭✭✭

    @dcarr Nice, restoring your Graebener press certainly was an exciting adventure under the shroud!

    BST: endeavor1967, synchr, kliao, Outhaul, Donttellthewife, U1Chicago, ajaan, mCarney1173, SurfinHi, MWallace, Sandman70gt, mustanggt, Pittstate03, Lazybones, Walkerguy21D, coinandcurrency242 , thebigeng, Collectorcoins, JimTyler, USMarine6, Elkevvo, Coll3ctor, Yorkshireman, CUKevin, ranshdow, CoinHunter4, bennybravo, Centsearcher, braddick, Windycity, ZoidMeister, mirabela, JJM, RichURich, Bullsitter, jmski52, LukeMarshall, coinsarefun, MichaelDixon, NickPatton, ProfLiz, Twobitcollector,Jesbroken oih82w8, DCW

  • Options
    rickoricko Posts: 98,724 ✭✭✭✭✭

    @Byers.... Could you please give further details regarding your 'discovery group'? Always interested in back stories of coin discoveries. Thank you, Cheers, RickO

Leave a Comment

BoldItalicStrikethroughOrdered listUnordered list
Emoji
Image
Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights
Drop image/file