Options
Reeding Error, Wear or Ground Down? 2016 Quarter
tennbjj
Posts: 97 ✭✭✭
Hey All,
I know we get a lot of "IS THIS WORTH ANYTHING!!!???" threads on here. Don't want to be "that guy." Just curious as to your opinion on this piece I grabbed out of pocket change today. 2016 Cumberland Gap Quarter
The reeding seems to be missing just from the copper part of the edge. The edges are very smooth and don't seem to have been filed off. Also the collar seems particularly high. Any possibility it escaped the mint this way?

May just be a weirdly specific kind of wear on it. I thought its a neat little piece. Opinions?
0
Comments
Looks altered. Too sharp & too thick. Are there any fine concentric lines around the edge?
My guess is that it was pressed into something.
Collector, occasional seller
It's been 'tapped' on the edges - PMD
Thanks all!
If you look closely (I can see it in your pic) you can see the fine lines going around the perimeter of the edge. Done after it left the mint. Sanded, spooned, and whatever; someone was trying to make something (or experimenting) with that quarter. IMO
'spooned'. As mentioned the edges have been tapped down.
If you visualize the minting process, if a quarter was struck without reading then the collar was not in place (or the blank was not in the collar), in which case it would be broadstruck and larger than normal.
Yes... definitely PMD....looks as if it were tapped and then finely buffed...Cheers, RickO
Pmd
I have the exact same quarter my wife found it in her drawer at work. Same year same everything was someone experimenting with mine too?
Probably not the same person, but someone did
the same thing to your Quarter.
A coin with smooth edges and a thick raised rim has been altered, either in the manor that Fred noted which is often referred to as spooned as a spoon is a common tool used to do this. It may also be a dryer coin, coins that get stuck in a dryer for a length of time will also have a very similar look.
My Collection of Old Holders
Never a slave to one plastic brand will I ever be.
People spoon coins like this as the first step in making a ring sometimes. A guy I work with just showed me a dime he got in change at McDonalds that had been spooned like that. I showed him this video on YouTube
https://youtu.be/CSsHWJr5DS0
Mr_Spud
And then they realize how difficult it is and that's how and why the OP found it in change....
"Memento mori !"
Or maybe it is the same quarter... @Albatross1985 has been robbed!
I don't think that is coincidence that I have a 2016 p quarter that is exactly the same it just looks to good then. Plus on top of the quarter the lettering is different like it didn't get a good strike and the edges come up how can you push the edges up just by spooning I think we're on to something because I've seen other 2016 p quarters that are the SAME.
Maybe someone did more than one and maybe not making it a coincidence
Either way : it’s been “tapped” on the edge
It is spooned. People make rings out of coins by spooning. You aren't onto anything except a damaged coin.
Successful BST with ad4400, Kccoin, lablover, pointfivezero, koynekwest, jwitten, coin22lover, HalfDimeDude, erwindoc, jyzskowsi, COINS MAKE CENTS, AlanSki, BryceM
Neat video. I have heard of this but that was the first time I saw the process.
Where's my $100 platinum Eagle?
I want a nice chubby ring!
https://youtube.com/watch?v=gwWVAJgoUN4
Why are there so many 2016 Shawnee with no ridges??? They haven’t all been altered… Too many of the same quarter to have all been altered..
Spooned coin to make a ring.
This project was abandon quickly.
Wayne
Kennedys are my quest...
Another ring making method. I think this makes a more attractive ring.
@BaronVonBaugh
Thanks for the video.
This method is more practical than using a spoon. lol
Wayne
Kennedys are my quest...
If your quarters look like those in the first four photos,
then, yes, they've all been altered.
I've seen Half Dollars look like that as well.
What I understood that happened is things can happen in coin sorting/counting machines where the coin gets caught in some of the moving/spinning parts and chews the edge off the coins.
"I Prefer Dangerous Freedom Over Peaceful Slavery"
Thomas Jefferson!
I have one of the same quarters that yall claim have been "spooned"....but tell me why is this quarter smaller than a normal quarter
Because it has been spooned.
My Collection of Old Holders
Never a slave to one plastic brand will I ever be.
Spoon? Dryer? The coin in this feed was neither. You guys who spit these ridiculous answers out have got to use common sense. Do you have any idea what the edge of a quarter would look like if you spoon it death trying to make it smooth? It wouldn't be smooth nor have crisp edges. None of you guys giving those ridiculous answers have obviously tried spooning a quarter or drying one , to make metal uniformly smooth and crisp , you have to sand, grind, or smash with hydraulic pressure. If you do it by hand with a spoon, it would look horrible and no where close to smooth or have crisp anything. You guys just throw out any old answer trying to sound smart and it does the opposite.
Sanding grounding, and smashing with a hydraulic press will do it.
….. so much to learn, so little time……
actually we had a member that did spooning in the navy
You don't spoon a coin with a spoon. You hit it on the edge with a hammer until the edge expands and the diameter of the coin shrinks. Science rules.
"But seek ye first the kingdom of God and His righteousness and all these things shall be added unto you" Matthew 6:33. Young fellow suffering from Bust Half fever.
BHNC #AN-10
JRCS #1606
Wow, really? The answers just get worse lol. No it wasn't a hammer. And the people saying spooned , REALLY , mean with a spoon. Lol That's how ridiculous that answer sounds , just as a hammer. Any of y'all ever worked with metal? There's absolutely zero chance of getting a coin to look like the one in this feed , smacking it with anything by hand. You could spatula, butter knife, tater peeler, or any kitchen utensil it to death and never get a coin to look like the one in this feed. It wasn't sanded or ground to look like that as well. That would leave evidence on the metal guys. Very obvious evidence. The coin is obviously pressed, with lots of pressure. It's the only way to get it round , smooth with crisp edges and no sand or grind lines in it, and for the people who will say they see a flat spot right in the middle, thats a light reflection, and makes that spot look flat kinda, it's not actually flat right there. Look at the coin better. And y'all should really think about your answers before you guys western dual fast spit them out like y'all's lives depend on it. Think through what you're telling people . Because it's incorrect
I was under the impression spooning in the navy is part of the 'don't ask, don't tell' policy.
.
The edge appears to be too perfectly circular for tapping or spooning.
But I think that is on the right track.
My opinion is that the coin has been run through some type of post-mint machine process,
like an upset mill used on planchets.
I didn't notice a weight posted, but I would assume the coin is of the proper weight.
.
Dcarr, stick to what your gut and common sense tell you my friend. You were right on spot to start , then kinda back slid. You're absolutely correct, the edge is too perfectly smooth to have been tapped or spooned. That's a ridiculous answer that these supposed coin experts have been giving out as gospel. Especially Fred Weinberg. You have a laundry list of credentials proudly displayed yet you confidently give that as an answer? That blows my mind sir. It shows how people just repeat any standard narrative response in life without ever even putting in any effort to critically think or physically testing what they say as truth. I challenge every person in this feed to replicate a quarter by " spooning" or " drying" it that said those as answers so confidently and snarky about it. Because not one of you can or will. Y'all won't even be able to replicate the coin with all available options out there to you. Period. You know why? Because none of y'all can machine press a coin in the manner that it takes to make said coin in this feed. And that's why multiple of them have surfaced. Y'all really think there's these magic spooners out there that can somehow tap a quarters edge to perfection smooth by hand? Bahahahaha. I have some ocean front property in Arizona I've got for sale if so .
Why would members want to help you establish yourself as an authority on damaged quarters?
Hey I don't need members to establish me as an authority on anything to do with coins. I've been a coin collector for 33 years and I know what I'm talking about. I've worked with metal for years as well. Not to mention I will have a full length article published in coin world magazine sometime in 2027 of a bombshell theory I have about coins and the minting process that's going to shake up the coin collecting hobby. I'm just a regular Joe off the street so to say and yet I'm getting a full length article with pics published in coin world magazine. Not a snippet, not a comment section, or mention. All of you guys will know who I am and my theory and credibility after it comes out. Trust me, I do know what I'm talking about. There's so much you guys have no idea about on coins, the minting process, and economics . Stayed tuned my friends because it's going to be a big one!
That’s standard hogwash that the forum takes in from noobs, trolls, and alts, but you’re okay—my opinions are not popular.
Not correct. I knew someone’s Dad that would sit in front of the TV and make rings using a spoon against the edges. It was annoying to hear that constant tapping. He did make some nice rings.
Terrywhite05 joined in March but waited eight months to make his first post, which was just a blanket condemnation of forum members.
I think he is most likely an alt for someone who created upheaval on the forum at some point in the past and was banned.
And BTW, to me, "spooned" or "dryer coin" are basically euphemisms for various processes that create coins with a certain appearance. In every case where someone posts one of those coins they are wondering if they are errors, which they are not.
It's clear that some of you have not watched the video that Mr. Spud has posted. It clearly shows that it is possible to literally spoon a coin and detailed examples of how.
Gary TheGasMan - Retired Hank Hill
They're not euphemisms. People are saying literal spooning, guys "dad" used to sit in front of TV doing it he said. Which doesn't mean he could produce a coin that looks like the coin in this feed. Because no one could with a spoon, knick knack patty whack away and produce a coin that looks like the one in the feed. It's mind blowing anyone tries to defend that position . I'm waiting for all these pro- spooners , and DIY dryer coin pros to prove me wrong and produce said spoon or dryer coin. Look at the evidence , which is the coin, and see where that takes you guys. And if it takes you to spoon and dryer avenue , you guys might not be in Kansas anymore . There is zero possibility that anyone spooned that coin. There's zero possibility you could have a quarter randomly flopping around in a dryer and somehow it comes out so perfect smooth with crisp edges. Do you guys seriously hear what you are saying? You're saying hey, " throw out all common sense and believe this impossible scenario." And no I'm not a banned person. I actually forgot I signed up for this forum until the other day.
"Dryer coin" can mean stuck in the mechanism, not necessarily "flopping around" inside.
In any case, such coins are not errors, and that is the main issue.
If you haven't been banned before I am confident that you eventually will be, based on your nasty demeanor and utter disrespect for forum members.
Some more common sense , if the quarter left the mint, as a clad quarter , and some pro spoon tapper decided to put his pro skills on said clad quarter, he was also able to separate the copper from nickel clad, in a straight line separation, that is the same thickness uniformly for each layer, by spooning away ? He tapped a quarter, and somehow didn't blend any of the clad into the copper, he somehow spooned it into the perfect layered coin in the pics? Like a straight line layer all the way around ,if you look at the side of a clad quarter, then imagine smacking away like a quarter drum bass player , and then ta dah ! Produces a coin like the one in this feed? Wow..................................this mic on?.............did everybody hear that?............this mic cant be on...........
Stuck in the mechanism, do tell what that mechanism would be and how the process would produce a coin like in this feed? See what you guys do, is throw out an answer and hope it sticks. And disrespect? No sir, the truth isn't disrespectful, it's lies that are , and people who tell them as facts, and continue to . At the very least anybody claiming these ridiculous methods at which this coin was produced should go, hey, if I've never ACTUALLY, tried to make one of these spoon coins, or test ran a DIY , dryer coin, I should probably see if I can or if it's possible to do either one of said methods. Why? So they can confidently and backed by truth, say, I have tested these methods and found them to be , A .true or B. false. And if not , I shouldn't state one method or both as facts. That's the respectable thing to do. Not just knowingly or blindly stating false information. Who cares how many people say the same lies as facts. Doesn't make it true, and doesn't make it right because everyone's doing it. So no sir I'm the one actually showing some respect , because I'm standing on truth and won't go along with the crowd.
as mentioned, we had a member that spooned coins in the navy
Yes, I'm sure your theory will take the numismatic community by storm, just like all of your other bombshell theories.
just make sure your theories jive with published mint procedures and those observations of forum people here who have toured the mint floors walking right next to the machinery