Home U.S. Coin Forum
Options

1964 Lincoln Steel 1c

Does this exist ?

Comments

  • Options
    coinbufcoinbuf Posts: 12,544 ✭✭✭✭✭

    No

    My Lincoln Registry
    My Collection of Old Holders

    Never a slave to one plastic brand will I ever be.
  • Options
    bolivarshagnastybolivarshagnasty Posts: 7,359 ✭✭✭✭✭

    You might run across a plated example from time to time.

  • Options
    Steven59Steven59 Posts: 11,157 ✭✭✭✭✭

    Not steel but struck on a dime silver planchet

    "When they can't find anything wrong with you, they create it!"

  • Options
    FredWeinbergFredWeinberg Posts: 6,033 ✭✭✭✭✭

    The OP's coin is plated, I'd strongly guess

    Retired Collector & Dealer in Major Mint Error Coins & Currency since the 1960's.Co-Author of Whitman's "100 Greatest U.S. Mint Error Coins", and the Error Coin Encyclopedia, Vols., III & IV. Retired Authenticator for Major Mint Errors for PCGS. A 50+ Year PNG Member.A full-time numismatist since 1972, retired in 2022.
  • Options
    vplite99vplite99 Posts: 1,432 ✭✭✭✭✭

    I've never seen one and I don't know of anyone I trust saying they have seen one.

    Vplite99
  • Options
    braddickbraddick Posts: 25,173 ✭✭✭✭✭

    Might be Mercury coated.
    If so, it is a bit dangerous if swallowed.

  • Options
    jesbrokenjesbroken Posts: 11,241 ✭✭✭✭✭

    Would you happen to have a photo of your Lincoln Cent? If so, after you have been a member for a couple of days. Copy your photo and paste it into you post. Welcome to the forum.
    Jim


    When a man who is honestly mistaken hears the truth, he will either quit being mistaken or cease to be honest....Abraham Lincoln

    Patriotism is supporting your country all the time, and your government when it deserves it.....Mark Twain
  • Options

    Thank you for your input. I will be sending it to PCGS for authentication in the next few days

  • Options
    Project NumismaticsProject Numismatics Posts: 1,884 ✭✭✭✭✭

    @wadeatchison, please report back after you receive it back from PCGS. Also please post pictures - many would like to see!

  • Options
    jesbrokenjesbroken Posts: 11,241 ✭✭✭✭✭

    You might be able to post a photo now, if so, please post a straight on(no angles) of the whole coin obverse and reverse. As Fred mentioned their are many here who might help before you spend the money, not to mention the considerable time. Weight of the coin would be a great help also.
    Jim


    When a man who is honestly mistaken hears the truth, he will either quit being mistaken or cease to be honest....Abraham Lincoln

    Patriotism is supporting your country all the time, and your government when it deserves it.....Mark Twain
  • Options
    WAYNEASWAYNEAS Posts: 7,267 ✭✭✭✭✭

    Photos, please.
    Wayne

    Kennedys are my quest...

  • Options
    Jzyskowski1Jzyskowski1 Posts: 6,650 ✭✭✭✭✭

    In the mean time. Here’s my 1943 steelie for my type set.


    🎶 shout shout, let it all out 🎶

  • Options
    jmlanzafjmlanzaf Posts: 42,624 ✭✭✭✭✭

    @Jzyskowski1 said:
    In the mean time. Here’s my 1943 steelie for my type set.

    >

    plated

    All comments reflect the opinion of the author, even when irrefutably accurate.

  • Options
    jmlanzafjmlanzaf Posts: 42,624 ✭✭✭✭✭

    @wadeatchison said:
    Thank you for your input. I will be sending it to PCGS for authentication in the next few days

    That is probably a mistake.

    All comments reflect the opinion of the author, even when irrefutably accurate.

  • Options
    Jzyskowski1Jzyskowski1 Posts: 6,650 ✭✭✭✭✭
    edited January 13, 2022 1:12PM

    @jmlanzaf said:

    @Jzyskowski1 said:
    In the mean time. Here’s my 1943 steelie for my type set.

    >

    plated

    Maybe 🙀. Fills a hole in my odds and ends type set. I’ve got AT coins and proofs. Just all mixed together. I collect what I like. 😉

    🎶 shout shout, let it all out 🎶

  • Options
    johnny9434johnny9434 Posts: 33,514 ✭✭✭✭✭

    What Fred said above

  • Options
    AUandAGAUandAG Posts: 25,039 ✭✭✭✭✭

    What Fred said above

    Registry: CC lowballs (boblindstrom), bobinvegas1989@yahoo.com
  • Options
    ifthevamzarockinifthevamzarockin Posts: 8,915 ✭✭✭✭✭

    @wadeatchison "I will be sending it to PCGS for authentication in the next few days"

    You would be wise to do a little more research and to post photos here first. ;)

    Many things can make a coin appear to be something it isn't. ;)
    The penny & nickel here changed color because of heat.

  • Options
    jmlanzafjmlanzaf Posts: 42,624 ✭✭✭✭✭

    @Jzyskowski1 said:

    @jmlanzaf said:

    @Jzyskowski1 said:
    In the mean time. Here’s my 1943 steelie for my type set.

    >

    plated

    Maybe 🙀. Fills a hole in my odds and ends type set. I’ve got AT coins and proofs. Just all mixed together. I collect what I like. 😉

    It was a joke. They are all plated: zinc/steel

    All comments reflect the opinion of the author, even when irrefutably accurate.

  • Options
    Steven59Steven59 Posts: 11,157 ✭✭✭✭✭

    @wadeatchison said:
    [Thank you for your input. I will be sending it to PCGS for authentication in the next few days]

    Just see if it sticks to a magnet before you send it in.

    "When they can't find anything wrong with you, they create it!"

  • Options
    MsMorrisineMsMorrisine Posts: 39,831 ✭✭✭✭✭

    actually it's not a joke.

    it has been replated

    Current maintainer of Stone's Master List of Favorite Websites // My BST transactions
  • Options
    JBKJBK Posts: 17,708 ✭✭✭✭✭

    @MsMorrisine said:
    actually it's not a joke.

    it has been replated

    "Reprocessed" is how they sold it to us years ago. :p

  • Options
    CameonutCameonut Posts: 7,434 ✭✭✭✭✭

    Does it stick to a magnet?

    “In matters of style, swim with the current; in matters of principle, stand like a rock." - Thomas Jefferson

    My digital cameo album 1950-64 Cameos - take a look!

  • Options
    MsMorrisineMsMorrisine Posts: 39,831 ✭✭✭✭✭

    If it is nickel plated, it may stick to a strong magnet

    Current maintainer of Stone's Master List of Favorite Websites // My BST transactions
  • Options
    moursundmoursund Posts: 3,207 ✭✭✭✭✭

    @MsMorrisine said:
    If it is nickel plated, it may stick to a strong magnet

    If it's a steelie with any kind of plating, I'd expect it to stick to just about any magnet.

    100th pint of blood donated 7/19/2022 B) . Transactions with WilliamF, Relaxn, LukeMarshal, jclovescoins, braddick, JWP, Weather11am, Fairlaneman, Dscoins, lordmarcovan, Collectorcoins, SurfinxHI, JimW. God so loved the world that he gave his only begotten son, that who so believeth in him should not perish but have everlasting life.
  • Options
    MsMorrisineMsMorrisine Posts: 39,831 ✭✭✭✭✭

    I see on the profile, the user is now a member and can copy-paste/drag-drop photos

    A weight to at least tenths of a gram would help

    Current maintainer of Stone's Master List of Favorite Websites // My BST transactions
  • Options
    Batman23Batman23 Posts: 5,403 ✭✭✭✭✭

    @jmlanzaf said:

    @wadeatchison said:
    Thank you for your input. I will be sending it to PCGS for authentication in the next few days

    That is probably a mistake.

    I agree. I would first try the magnet test. Then I would check the weight and compare with various planchet weights. Most of these are plated novelties and these two tests will help you determine that before throwing $100 at a penny worth one cent.

  • Options
    jerseycat101jerseycat101 Posts: 1,361 ✭✭✭✭✭

    @wadeatchison said:
    Thank you for your input. I will be sending it to PCGS for authentication in the next few days

    You definitely should spend money on this endevour. You definitely got feedback indicating that was the appropriate course of action. I am definitely being sarcastic.

  • Options
    FredWeinbergFredWeinberg Posts: 6,033 ✭✭✭✭✭

    No scale or magnet needed - we can tell if it's
    plated or not from decent photos, please.

    Retired Collector & Dealer in Major Mint Error Coins & Currency since the 1960's.Co-Author of Whitman's "100 Greatest U.S. Mint Error Coins", and the Error Coin Encyclopedia, Vols., III & IV. Retired Authenticator for Major Mint Errors for PCGS. A 50+ Year PNG Member.A full-time numismatist since 1972, retired in 2022.
  • Options
    davewesendavewesen Posts: 6,966 ✭✭✭✭✭

    OMG, is that a buffalo struck on a gold planchet?

  • Options
    jmlanzafjmlanzaf Posts: 42,624 ✭✭✭✭✭

    @MsMorrisine said:
    actually it's not a joke.

    it has been replated

    Yes, but it WAS intended as a joke. They are all plated, even if not replated.

    All comments reflect the opinion of the author, even when irrefutably accurate.

  • Options
    ifthevamzarockinifthevamzarockin Posts: 8,915 ✭✭✭✭✭

    @davewesen "OMG, is that a buffalo struck on a gold planchet?"

    Yep, solid gold! :p

    I think it may have been done by the mint superintendent and a bored mint worker to release into circulation as a new exciting error. ;):D

  • Options
    Steven59Steven59 Posts: 11,157 ✭✭✭✭✭

    @ifthevamzarockin said

    I think it may have been done by the mint superintendent and a bored mint worker to release into circulation as a new exciting error. ;):D

    Oh God - Love it VAM - My 1909 S PMD Bla Bla Bla - can I hijack this thread???

    "When they can't find anything wrong with you, they create it!"

  • Options
    rickoricko Posts: 98,724 ✭✭✭✭✭

    @wadeatchison .... Welcome aboard. You would do well to post pictures here for evaluation before you send the coin to the TPG. It could save you cash. Cheers, RickO

  • Options


    I have a very weak magnet in my office, it sticks but not real strong
    Thanks everyone. I agree it is probably fake but......

  • Options
    JWPJWP Posts: 36,294 ✭✭✭✭✭

    If Google says it exists, it has to be true. :(

    USN & USAF retired 1971-1993
    Successful Transactions with more than 100 Members

  • Options
    OldhoopsterOldhoopster Posts: 2,930 ✭✭✭✭✭

    It was plated after it left the mint.

    Plating a coin was a common science experiment in schools at one time. A nice chemistry lesson, and the student got to take their experiment home (sometimes to be spent later)

    Member of the ANA since 1982
  • Options
    MsMorrisineMsMorrisine Posts: 39,831 ✭✭✭✭✭

    Plated

    Current maintainer of Stone's Master List of Favorite Websites // My BST transactions
  • Options
    291fifth291fifth Posts: 25,208 ✭✭✭✭✭

    Obviously plated. It may have once been part of some cheap jewelry item.

    All glory is fleeting.
  • Options
    Steven59Steven59 Posts: 11,157 ✭✭✭✭✭

    There you go............ everybody that responded just saved you alot of money on grading fees - first round of drinks is on you - :D

    "When they can't find anything wrong with you, they create it!"

  • Options
    OverdateOverdate Posts: 7,318 ✭✭✭✭✭

    @JBK said:

    @MsMorrisine said:
    actually it's not a joke.

    it has been replated

    "Reprocessed" is how they sold it to us years ago. :p

    It was common to see "reprocessed" steel cents, often by the roll, for sale in ads back in the 1950s and 1960s. The steelies found in circulation typically looked terrible. Now I almost never see them advertised, although there must be tons of "reproccessed" steel cents out there somewhere.

  • Options

    Belly up to the bar my friends !!!!! Thank you so much for saving me the cost ( and embarrassment ) of sending it in

  • Options
    jesbrokenjesbroken Posts: 11,241 ✭✭✭✭✭

    Still would like to hear weight and whether magnetic or not. Just for curiosity's sake.
    Jim


    When a man who is honestly mistaken hears the truth, he will either quit being mistaken or cease to be honest....Abraham Lincoln

    Patriotism is supporting your country all the time, and your government when it deserves it.....Mark Twain

Leave a Comment

BoldItalicStrikethroughOrdered listUnordered list
Emoji
Image
Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights
Drop image/file