Your comment will appear after it is approved.

WAYNEAS · July 7, 2021 6:02PM

Why am I receiving this message when I try to reply to a discussion.

WAYNEAS · July 7, 2021 6:06PM

@WAYNEAS said:
Why am I receiving this message when I try to reply to a discussion.

It is to a link posted by PCGS regarding embossing method concerning altered mint marks.
Wayne

jmlanzaf · July 7, 2021 6:10PM

It is a common "feature" in the software. Try not replying directly or removing the links in the post you are replying to.

cameonut2011 · July 7, 2021 6:10PM

Uh oh.

TurtleCat · July 7, 2021 6:12PM

It can be caused by one of several things:

forum bug - some posts just hit it for some reason
post has a link to a place not approved/allowed
possibly words or other things that catch in the filter.

Rest assured that no one ever looks at the posts needing approval so usually posting again or looking carefully at what you post next time is the only recourse.

WAYNEAS · July 7, 2021 6:12PM

@jmlanzaf said:
It is a common "feature" in the software. Try not replying directly or removing the links in the post you are replying to.

I can not even start a new thread about the embossing process involving mint marks.
Who can I contact to get approval?
Wayne

WAYNEAS · July 7, 2021 6:16PM

I did remove the link in the original post and it allowed me to reply to the original post.
Still do not understand why I can not provide a link to a PCGS article.
Thanks
Wayne

WAYNEAS · July 7, 2021 6:19PM

@TurtleCat said:
It can be caused by one of several things:

forum bug - some posts just hit it for some reason

post has a link to a place not approved/allowed

possibly words or other things that catch in the filter.

Rest assured that no one ever looks at the posts needing approval so usually posting again or looking carefully at what you post next time is the only recourse.

I have been denied approval at least 8 times over the course of several days.
Any Admins out there who can explain what the rules are?
Wayne

jmlanzaf · July 7, 2021 6:32PM

@WAYNEAS said:
I did remove the link in the original post and it allowed me to reply to the original post.
Still do not understand why I can not provide a link to a PCGS article.
Thanks
Wayne

Happens to to me occasionally. As I said, it's a "feature"

cameonut2011 · July 7, 2021 6:34PM

@jmlanzaf said:

@WAYNEAS said:
I did remove the link in the original post and it allowed me to reply to the original post.
Still do not understand why I can not provide a link to a PCGS article.
Thanks
Wayne

Happens to to me occasionally. As I said, it's a "feature"

Even more reason to gulp in apprehension…

WAYNEAS · July 7, 2021 6:42PM

I pm'd it to @MsMorrisine and he was able to list the link.
He thinks it is a software bug and since I have a "Bug Badge", I asked him to report it.
Again thanks
Wayne
Edited to correct "she" to "he".

MsMorrisine · July 7, 2021 6:43PM

He

MsMorrisine · July 7, 2021 6:44PM

https://coinweek.com/counterfeits/counterfeit-mintmarks-watch-out-for-embossed-mintmarks/

MsMorrisine · July 7, 2021 6:45PM

Success x 2

CaptHenway · July 7, 2021 7:15PM

I remember the report when the first batch of embossed mint marks hit at a Long Beach show. Dozens of pieces sold in Capital Plastics holders while the show was very busy. Then somebody had a lull and opened up a holder.

Mr_Spud · July 7, 2021 7:22PM

I get that message sometimes when I try to correct typo errors when I’m posting something. If I try to edit multiple times in a short period it happens and I get that message. My post goes “poof” and disappears and never comes back. If I do it to a thread where I’m the original poster it makes the whole thread disappear even if other people posted after me.

WAYNEAS · July 8, 2021 7:07AM

@MsMorrisine said:
He

sorry on the pronoun usage
Wayne

Jzyskowski1 · July 8, 2021 8:16AM

Here’s the post please respond if you can see it thanks Wayne

CoinJunkie · July 8, 2021 9:42AM

@WAYNEAS said:
I pm'd it to @MsMorrisine and she was able to list the link.
She thinks it is a software bug and since I have a "Bug Badge", I asked her to report it.
Again thanks
Wayne
Edited to correct "she" to "he".

Is your correction currently waiting for approval?

MsMorrisine · July 8, 2021 9:54AM

it's not really about pronouns as I am a he.

even before there was a world wide web there was still the internet.

In my younger days I trolled. What better way to emasculate a male is to start by making them think it was coming from a female.

TwoSides2aCoin · July 8, 2021 10:05AM

I got pre-approved. Ask Heather.

derryb · July 8, 2021 10:08AM

It's one way of letting you know that you are not in the circle of trust.

DelawareDoons · July 8, 2021 10:16AM

This comment is pending moderator review and will be available for reading after approval.

Just kidding.

PerryHall · July 8, 2021 11:04AM

Maybe it means you're on double secret probation.

braddick · July 8, 2021 11:06AM

@PerryHall said:
Maybe it means you're on double secret probation.

Not a secret anymore.

PhilLynott · July 8, 2021 11:20AM

I get this from time to time when trying to post an image from imgur. It's annoying for sure especially when you have a gem you want everyone to see!

Jzyskowski1 · July 9, 2021 12:14AM

Here’s the post please respond if you can see it thanks Wayne

Crypto · July 9, 2021 4:28PM

Hit preview your post and you can bypass it

WAYNEAS · July 10, 2021 7:32AM

@Crypto said:
Hit preview your post and you can bypass it

That would be a no!
I hit the "Preview Button" every time so I can view what I am about to post.
The minute you hit the "Post Comment" button, the message "Your comment will appear after it is approved" appears.
Thanks for your insight.
Wayne

Crypto · July 11, 2021 7:13AM

@WAYNEAS said:

@Crypto said:
Hit preview your post and you can bypass it

That would be a no!
I hit the "Preview Button" every time so I can view what I am about to post.
The minute you hit the "Post Comment" button, the message "Your comment will appear after it is approved" appears.
Thanks for your insight.
Wayne

That’s strange as it works for me. I must be pre-cleared for always following forum rules and setting the standard for civility.

Tip of the cap to you kind sir

WAYNEAS · July 11, 2021 7:34AM

@Crypto said:

@WAYNEAS said:

@Crypto said:
Hit preview your post and you can bypass it

That would be a no!
I hit the "Preview Button" every time so I can view what I am about to post.
The minute you hit the "Post Comment" button, the message "Your comment will appear after it is approved" appears.
Thanks for your insight.
Wayne

That’s strange as it works for me. I must be pre-cleared for always following forum rules and setting the standard for civility.

Tip of the cap to you kind sir

>
>
Look above to the posters that it did not work for.
Very happy that you are a tried and true poster who follows the rules (as I do).
You could only list the link which would work on its own but not work with any added comments.
The link works now but not then. Hope this clarifies things.

Wayne

MFeld · July 11, 2021 8:03AM

I’m convinced that it’s a forum bug. It’s happened to me on numerous occasions, each time, when quoting another poster within my message. It had nothing to do with links (as none were included) or the innocuous subject matter of the posts. It also appeared to occur more frequently when I was editing a post.

LanceNewmanOCC · July 11, 2021 8:30AM

@WAYNEAS said:
Why am I receiving this message when I try to reply to a discussion.

.
goodness. 4 days later this thread is still going. is your post STILL not yet approved!

WAYNEAS · July 11, 2021 9:02AM

@MFeld said:
I’m convinced that it’s a forum bug. It’s happened to me on numerous occasions, each time, when quoting another poster within my message. It had nothing to do with links (as none were included) or the innocuous subject matter of the posts. It also appeared to occur more frequently when I was editing a post.

Thanks for the additional information.
I always appreciate your insight.
Wayne

WAYNEAS · July 11, 2021 9:11AM

@LanceNewmanOCC said:

@WAYNEAS said:
Why am I receiving this message when I try to reply to a discussion.

.
goodness. 4 days later this thread is still going. is your post STILL not yet approved!

I have not tried since @MsMorrisine was able to post the link.
Getting the link posted was the important thing so others could see and read it.
This was my first and only attempt to post a link.
I figured that the Admin would have responded by now but they have not.
No big deal anymore.
Wayne

LanceNewmanOCC · July 11, 2021 9:19AM

@WAYNEAS said:
I have not tried since @MsMorrisine was able to post the link.
Getting the link posted was the important thing so others could see and read it.
This was my first and only attempt to post a link.
I figured that the Admin would have responded by now but they have not.
No big deal anymore.
Wayne

did you post it in the hyperlink (url) box above or just post the link direct in the post. i think it may work both ways. to post a youtube video, we just post the link direct to this box, which is nice.

WAYNEAS · July 11, 2021 9:21AM

Sent a PM to Heather about this issue.
Will let you know what she says.
Wayne

WAYNEAS · July 11, 2021 9:31AM

@LanceNewmanOCC said:

@WAYNEAS said:
I have not tried since @MsMorrisine was able to post the link.
Getting the link posted was the important thing so others could see and read it.
This was my first and only attempt to post a link.
I figured that the Admin would have responded by now but they have not.
No big deal anymore.
Wayne

did you post it in the hyperlink (url) box above or just post the link direct in the post. i think it may work both ways. to post a youtube video, we just post the link direct to this box, which is nice.

>
>

The link was first added directly to my post along with my comments.
That was when the issues started of getting "Your comment will appear after it is approved."
When the link was the only thing listed in the post, It worked. SEE the above @MsMorrisine post of July 7, 2021 9:44PM.
Will wait to hear from @HeatherBoyd.
Wayne

LanceNewmanOCC · July 11, 2021 9:53AM

@WAYNEAS said:
The link was first added directly to my post along with my comments.
That was when the issues started of getting "Your comment will appear after it is approved."
When the link was the only thing listed in the post, It worked. SEE the above @MsMorrisine post of July 7, 2021 9:44PM.
Will wait to hear from @HeatherBoyd.
Wayne

there is a small chance that your post/link were put together in such a way as to create an unacceptable string of characters. i've seen this on and off over the many years i've been on various software versions of forums. not saying that is the case here but it would be one of the first things to check for them.

pre-approved/blocked words/code etc leave a ton of exceptions to be exploited intentionally/accidentally and the software/hardware is set up to react by default whenever certain criteria are met and sometimes to get the last small percent, must be done one by one and on a case by case basis. just comes with the territory. that doesn't take into account actual glitches which are usually unintentionally set off on our part.

they also have various global/local settings for users in all and specific categories for various reasons. it can get a bit harrowing to set this up on the software side if one isn't well versed in doing so. i have tinkered in the past with this stuff but it can require a lot of maintenance if the members/managers/mods or whatever categories for permissions are being refined/changing.

ok enough on that.

Jzyskowski1 · July 11, 2021 9:56AM

@Jzyskowski1 said:
Here’s the post please respond if you can see it thanks Wayne

Any luck

WAYNEAS · July 11, 2021 10:05AM

@LanceNewmanOCC said:

@WAYNEAS said:
The link was first added directly to my post along with my comments.
That was when the issues started of getting "Your comment will appear after it is approved."
When the link was the only thing listed in the post, It worked. SEE the above @MsMorrisine post of July 7, 2021 9:44PM.
Will wait to hear from @HeatherBoyd.
Wayne

there is a small chance that your post/link were put together in such a way as to create an unacceptable string of characters. i've seen this on and off over the many years i've been on various software versions of forums. not saying that is the case here but it would be one of the first things to check for them.

pre-approved/blocked words/code etc leave a ton of exceptions to be exploited intentionally/accidentally and the software/hardware is set up to react by default whenever certain criteria are met and sometimes to get the last small percent, must be done one by one and on a case by case basis. just comes with the territory. that doesn't take into account actual glitches which are usually unintentionally set off on our part.

they also have various global/local settings for users in all and specific categories for various reasons. it can get a bit harrowing to set this up on the software side if one isn't well versed in doing so. i have tinkered in the past with this stuff but it can require a lot of maintenance if the members/managers/mods or whatever categories for permissions are being refined/changing.

ok enough on that.

Thanks for the additional info on what could cause the issue.
Time will tell or maybe not. lol
Wayne

TurtleCat · October 19, 2021 4:57AM

I discovered another thing that can cause the automatic "your comment needs to be approved" message. If you're copy/pasting from another source that uses curly quotes (or basically anything not in the 7 bit ascii space) then it'll trigger the message. I think the forum software is looking for anything outside the basic character set to flag - not just a link. It may be to remove what it thinks are "invisible characters" from being posted.

Jzyskowski1 · October 19, 2021 7:31AM

I’ve got a comment on the dang “show me your new purchase “ that’s 3 days ago. Won’t let me edit and try to post. My last post reappears and waiting we go. Just that thread 🤔

vulcanize · October 19, 2021 7:49AM

Has happened a couple of times to me and want to attribute it to a possible software bug.

moursund · October 19, 2021 12:59PM

@WAYNEAS said:
I pm'd it to @MsMorrisine and he was able to list the link.
He thinks it is a software bug and since I have a "Bug Badge", I asked him to report it.
Again thanks
Wayne
Edited to correct "she" to "he".

hey, i want a bug badge. sounds K007!

Your comment will appear after it is approved.

Comments

Leave a Comment

Categories