Have at it, you savages.

Options

Fresh meat for the pack. Seller is the buyer, confirmed by the seller of the original.

https://www.ebay.com/itm/1887-Morgan-Dollar-PCGS-MS63-OGH-Rattler-/253912324504

«134

Comments

  • Meltdown
    Meltdown Posts: 9,284 ✭✭✭✭✭
    edited November 19, 2018 1:43PM
    Options

    Here are the original seller photo's and the one currently on ebay.
    This guy is a cook and a crook.
    The white Morgan was sold via ebay and delivered to the current seller on 10/29 - less than a month later, it's now a rainbow?

  • 1630Boston
    1630Boston Posts: 14,157 ✭✭✭✭✭
    Options

    Wow!

    Successful transactions with : MICHAELDIXON, Manorcourtman, Bochiman, bolivarshagnasty, AUandAG, onlyroosies, chumley, Weiss, jdimmick, BAJJERFAN, gene1978, TJM965, Smittys, GRANDAM, JTHawaii, mainejoe, softparade, derryb, Ricko

    Bad transactions with : nobody to date

  • Tookybandit
    Tookybandit Posts: 3,424 ✭✭✭✭
    Options

    Wow that's wild!
    Is it evil that the toned version looks nicer to me?

  • Hemispherical
    Hemispherical Posts: 9,370 ✭✭✭✭✭
    Options

    Double Wow!

  • Hallco
    Hallco Posts: 3,727 ✭✭✭✭✭
    Options

    I'm not an expert in monster toners(or anything else for the most part)...but the colors don't have a natural look to me at all.

  • Coinstartled
    Coinstartled Posts: 10,135 ✭✭✭✭✭
    Options

    Not all that impressive as monster toners go.

  • WillieBoyd2
    WillieBoyd2 Posts: 5,410 ✭✭✭✭✭
    Options

    Is this the "Lady Scarface" variety?

    :)

    https://www.brianrxm.com
    The Mysterious Egyptian Magic Coin
    Coins in Movies
    Coins on Television

  • Hemispherical
    Hemispherical Posts: 9,370 ✭✭✭✭✭
    Options

    Probably nothing... then again.

    The scratches that can be seen on the slab do not seem to match. These are just observations based upon the above pics, comparing top pic to bottom pic:

    -scratches under 1887
    -scratches under MS63
    -scratch at 2:00 near outside edge of coin
    -there is more...got tired of typing

    To be fair, lighting and angle are factors and my observations could be way off.

    Probably better to compare coins but the slab jumped at me first.

    What is the incidence rate of home re-slabbers?

  • messydesk
    messydesk Posts: 20,814 ✭✭✭✭✭
    Options

    @Hemispherical said:
    Probably nothing... then again.

    The scratches that can be seen on the slab do not seem to match. These are just observations based upon the above pics, comparing top pic to bottom pic:

    -scratches under 1887
    -scratches under MS63
    -scratch at 2:00 near outside edge of coin
    -there is more...got tired of typing

    To be fair, lighting and angle are factors and my observations could be way off.

    Probably better to compare coins but the slab jumped at me first.

    What is the incidence rate of home re-slabbers?

    Hack under Liberty's eye and mark on jaw make it easy to show it's the same coin. Are you saying that the slab was opened and the coin gassed before being put back into a different slab with the same tag? Whether or not that's the case, if it's possible, it's yet another reason for PCGS to invalidate this cert.

  • braddick
    braddick Posts: 25,184 ✭✭✭✭✭
    Options

    @Hemispherical said:
    Probably nothing... then again.

    The scratches that can be seen on the slab do not seem to match. These are just observations based upon the above pics, comparing top pic to bottom pic:

    -scratches under 1887
    -scratches under MS63
    -scratch at 2:00 near outside edge of coin
    -there is more...got tired of typing

    To be fair, lighting and angle are factors and my observations could be way off.

    Probably better to compare coins but the slab jumped at me first.

    What is the incidence rate of home re-slabbers?

    My dude, same serial number, bro.

  • Cougar1978
    Cougar1978 Posts: 10,067 ✭✭✭✭✭
    edited November 19, 2018 2:32PM
    Options

    So he removed it from slab, doctored it, put it back in?

    Or did he heat it in the slab?

    No doubt same coin.

    Investor
  • 1630Boston
    1630Boston Posts: 14,157 ✭✭✭✭✭
    Options

    Although I am No Expert, I would assume it was tarnished in the slab JMO :smile:

    Successful transactions with : MICHAELDIXON, Manorcourtman, Bochiman, bolivarshagnasty, AUandAG, onlyroosies, chumley, Weiss, jdimmick, BAJJERFAN, gene1978, TJM965, Smittys, GRANDAM, JTHawaii, mainejoe, softparade, derryb, Ricko

    Bad transactions with : nobody to date

  • Insider2
    Insider2 Posts: 14,452 ✭✭✭✭✭
    Options

    Great detective work and THANKS for the post!

  • Insider2
    Insider2 Posts: 14,452 ✭✭✭✭✭
    Options

    @Hemispherical said:
    Probably nothing... then again.

    The scratches that can be seen on the slab do not seem to match. These are just observations based upon the above pics, comparing top pic to bottom pic:

    -scratches under 1887
    -scratches under MS63
    -scratch at 2:00 near outside edge of coin
    -there is more...got tired of typing

    To be fair, lighting and angle are factors and my observations could be way off.

    Probably better to compare coins but the slab jumped at me first.

    What is the incidence rate of home re-slabbers?

    Could Be. o:)

  • BuffaloIronTail
    BuffaloIronTail Posts: 7,766 ✭✭✭✭✭
    Options

    No comment.

    Pete

    "I tell them there's no problems.....only solutions" - John Lennon
  • StrikeOutXXX
    StrikeOutXXX Posts: 3,354 ✭✭✭✭✭
    Options

    @BryceM said:
    Gassed in the slab would be my guess. I'm pretty sure this is the only time this has ever happened. ;)

    It’s 2006 all over again
    https://forums.collectors.com/discussion/535409/pcgs-forum-members-please-accept-my-apologies/p1

    ------------------------------------------------------------

    "You Suck Award" - February, 2015

    Discoverer of 1919 Mercury Dime DDO - FS-101
  • AmazingIntellect
    Options

    @BryceM said:
    Gassed in the slab would be my guess. I'm pretty sure this is the only time this has ever happened. ;)

    Several years ago, on this very board, a CU member was caught red handed doing exactly the same thing. Gave some totally BS excuse which no one with two active brain cells ever believed. If memory serves me correctly, he confessed and gave his mea culpas. How soon they forget, and to think, he still posts here today......................

  • PerryHall
    PerryHall Posts: 47,752 ✭✭✭✭✭
    Options

    @FadeToBlack said:
    You dont have to remove these from the slab.

    You put the slab in a vacuum chamber, vacuum out the air, and add your toning agent to the chamber... Or something like that.

    This is exactly what happened. Slabs are definitely not air tight. Rattler slabs especially so.

    Worry is the interest you pay on a debt you may not owe.
    "Paper money eventually returns to its intrinsic value---zero."----Voltaire
    "Everything you say should be true, but not everything true should be said."----Voltaire

  • Insider2
    Insider2 Posts: 14,452 ✭✭✭✭✭
    Options

    @FadeToBlack said:
    You dont have to remove these from the slab.

    You put the slab in a vacuum chamber, vacuum out the air, and add your toning agent to the chamber... Or something like that.

    This comment leaves me cold. Do you know or are you guessing? I think it would be very educational to learn the exact process as I'm 100% sure many on this forum know how it is done.

    The ONLY time I actually saw slabs from five different TPGS's tested for air tight properties was done with Hydrogen Sulfide in a zip lock bag using a fume hood. There was no perceptible change and all but one slab passed. No heat or vacuum was used and the slabs were only exposed for a short time.

  • This content has been removed.
  • ChrisH821
    ChrisH821 Posts: 7,147 ✭✭✭✭✭
    Options

    I like the original better

    Collector, occasional seller

  • JBK
    JBK Posts: 17,862 ✭✭✭✭✭
    Options

    I would assume a vacuum sucks all of the air out of the chamber (presumably including what is in the slab), and then the magic gas is introduced into the chamber. Once the chamber is depressurized, it and everything in it is filled with the tainted air.

    Something like that.

  • Colonialcoin
    Colonialcoin Posts: 923 ✭✭✭✭✭
    Options

    Great detective work.

    Both versions are ugly. That said, perhaps the guy tested a cheap coin to see how things work out. Next step could be a better date in a better grade. Ugh!

  • coinbuf
    coinbuf Posts: 12,567 ✭✭✭✭✭
    Options

    @Insider2 said:

    @FadeToBlack said:
    You dont have to remove these from the slab.

    You put the slab in a vacuum chamber, vacuum out the air, and add your toning agent to the chamber... Or something like that.

    This comment leaves me cold. Do you know or are you guessing? I think it would be very educational to learn the exact process as I'm 100% sure many on this forum know how it is done.

    The ONLY time I actually saw slabs from five different TPGS's tested for air tight properties was done with Hydrogen Sulfide in a zip lock bag using a fume hood. There was no perceptible change and all but one slab passed. No heat or vacuum was used and the slabs were only exposed for a short time.

    Check a couple posts above yours, you can get the full details from the forum member caught doing this. He is still a member today.

    My Lincoln Registry
    My Collection of Old Holders

    Never a slave to one plastic brand will I ever be.
  • Coinstartled
    Coinstartled Posts: 10,135 ✭✭✭✭✭
    edited November 19, 2018 3:13PM
    Options

    @Insider2 said:

    @FadeToBlack said:
    You dont have to remove these from the slab.

    You put the slab in a vacuum chamber, vacuum out the air, and add your toning agent to the chamber... Or something like that.

    This comment leaves me cold. Do you know or are you guessing? I think it would be very educational to learn the exact process as I'm 100% sure many on this forum know how it is done.

    I don't believe that it benefits the hobby to have that information shared on a public forum.

    ...and for the record, I do not know the process.

  • U1chicago
    U1chicago Posts: 6,993 ✭✭✭✭✭
    edited November 19, 2018 3:28PM
    Options

    @Colonialcoin said:
    Great detective work.

    Both versions are ugly. That said, perhaps the guy tested a cheap coin to see how things work out. Next step could be a better date in a better grade. Ugh!

    It’s likely profitable enough with cheap coins. This example was bought for $60 and is already over $100 with a few days to go. That seller sold another gassed rattler for $262. At that pace they don’t even have to move on to bigger targets.

    https://www.ebay.com/itm/Vibrant-Natural-Rainbow-Toned-1886-Morgan-Silver-Dollar-Pcgs-OGH-Rattler-MS61/183492750463?hash=item2ab9052c7f:g:x7AAAOSwVFJbyQRy#vi__app-cvip-panel

    https://www.ebay.com/itm/1886-PHILADELPHIA-MORGAN-DOLLAR-PCGS-MS61-/401601295543?nordt=true&rt=nc&_trksid=p2349624.m43663.l44720#vi__app-cvip-panel

  • BryceM
    BryceM Posts: 11,940 ✭✭✭✭✭
    Options

    I particularly like how that one is advertised as naturally toned.

    Me think he doth protest too much.....

  • Namvet69
    Namvet69 Posts: 9,423 ✭✭✭✭✭
    Options

    This is why all this intense toning stuff should be either a negative or irrelevant. The professional numismatists and scientists know what naturally progressive toning looks like on silver. So what's next? Peace Roy

    BST: endeavor1967, synchr, kliao, Outhaul, Donttellthewife, U1Chicago, ajaan, mCarney1173, SurfinHi, MWallace, Sandman70gt, mustanggt, Pittstate03, Lazybones, Walkerguy21D, coinandcurrency242 , thebigeng, Collectorcoins, JimTyler, USMarine6, Elkevvo, Coll3ctor, Yorkshireman, CUKevin, ranshdow, CoinHunter4, bennybravo, Centsearcher, braddick, Windycity, ZoidMeister, mirabela, JJM, RichURich, Bullsitter, jmski52, LukeMarshall, coinsarefun, MichaelDixon, NickPatton, ProfLiz, Twobitcollector,Jesbroken oih82w8, DCW

  • Hemispherical
    Hemispherical Posts: 9,370 ✭✭✭✭✭
    Options

    @Hemispherical said:
    Probably nothing... then again.

    The scratches that can be seen on the slab do not seem to match. These are just observations based upon the above pics, comparing top pic to bottom pic:

    -scratches under 1887
    -scratches under MS63
    -scratch at 2:00 near outside edge of coin
    -there is more...got tired of typing

    To be fair, lighting and angle are factors and my observations could be way off.

    Probably better to compare coins but the slab jumped at me first.

    What is the incidence rate of home re-slabbers?

    To quote myself, “Probably nothing...” and “Probably better to compare coins...”

    Still, what is the incidence rate of home re-slabbing and/or modifications to a slab?

  • blitzdude
    blitzdude Posts: 7,723 ✭✭✭✭✭
    Options

    Glad they decided to dip it. Looks much better white then with that nasty AT.

    The whole worlds off its rocker, buy Gold™.
    BOOMIN!™
    Wooooha! Did someone just say it's officially "TACO™" Tuesday????
    Retiring at 55, what day is today? :sunglasses:

  • hammer1
    hammer1 Posts: 3,874 ✭✭✭✭✭
    Options

    @HappyLittleTrees said:

    @Insider2 said:
    Great detective work and THANKS for the post!

    Was discovered by the seller. I contribute nothing to society.

    You're the top poster at that Refugee place.

  • Dave99B
    Dave99B Posts: 8,947 ✭✭✭✭✭
    Options

    Shocking, to say the least.

    Dave

    Always looking for original, better date VF20-VF35 Barber quarters and halves, and a quality beer.
  • asheland
    asheland Posts: 24,545 ✭✭✭✭✭
    Options

    @messydesk said:
    Hopefully our hosts are seeing this sort of crap and are thinking of what they could do to protect both the unsuspecting buyer and the integrity of their brand. There are times like this where there is sufficient evidence to pull a cert on an old coin and show that it has been doctored in the slab. Cert lookup would then show an "invalidated" cert and show why.

    100% agree!

  • BAJJERFAN
    BAJJERFAN Posts: 31,659 ✭✭✭✭✭
    Options

    @Cougar1978 said:
    So he removed it from slab, doctored it, put it back in?

    Or did he heat it in the slab?

    No doubt same coin.

    No need to remove it from the slab. Rattlers are not especially airtight.

    theknowitalltroll;
  • BAJJERFAN
    BAJJERFAN Posts: 31,659 ✭✭✭✭✭
    Options

    @FadeToBlack said:
    You dont have to remove these from the slab.

    You put the slab in a vacuum chamber, vacuum out the air, and add your toning agent to the chamber... Or something like that.

    What I would do.

    theknowitalltroll;
  • BAJJERFAN
    BAJJERFAN Posts: 31,659 ✭✭✭✭✭
    Options

    @BryceM said:
    I particularly like how that one is advertised as naturally toned.

    Me think he doth protest too much.....

    It's a natural result of the conditions to which it was exposed.

    theknowitalltroll;
  • AmazingIntellect
    Options

    Why doesn't someone ask the current CU member who performed this stunt over a decade ago that I mentioned earlier? His work was more than just one or two slabs. Forgotten, or merely taking the ostrich head in the sand option?

  • BAJJERFAN
    BAJJERFAN Posts: 31,659 ✭✭✭✭✭
    Options

    @HappyLittleTrees said:
    I asked the seller if he toned it. Response: "Absolutely not. I don't think anyone can artificially tone a coin in a holder. Hope this answers your question. Have a great night."

    How many of his other listings are similarly toned?

    theknowitalltroll;
  • BAJJERFAN
    BAJJERFAN Posts: 31,659 ✭✭✭✭✭
    Options

    What's the likelihood that eBay would bounce you for auction interference if you asked the seller too many questions?

    theknowitalltroll;
  • fc
    fc Posts: 12,805 ✭✭✭
    Options

    Next advancement. Textile toning while in the slab! Get to work boys (and girls).

  • TwoSides2aCoin
    TwoSides2aCoin Posts: 45,217 ✭✭✭✭✭
    Options

    No biggie. A thirty dollar coin. Fifteen of it being the plastic.

Leave a Comment

BoldItalicStrikethroughOrdered listUnordered list
Emoji
Image
Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights
Drop image/file