FRIDAY = METAL PORN. WHAT TURNED YOU ON THIS WEEK?

Options
Weiss
Weiss Posts: 9,942 ✭✭✭✭✭
in Precious Metals

Two very minor pieces: 1870 Spanish 5 pesatas and a vintage HCJ Refiners bar.

What did you get? What did you sell? What did you see that made you wolf whistle?

We are like children who look at print and see a serpent in the last letter but one, and a sword in the last.
--Severian the Lame

Comments

  • WildIdea
    WildIdea Posts: 1,881 ✭✭✭✭✭
    edited September 28, 2018 8:16AM
    Options

    I picked up this 10 Oz silver bar this week. QUATRE looks rolled and sheared. Maybe ground or trimmed to tune final weight. We couldn’t find anything online about it. Zilch. Paid 2.50 over just for something different factor. Anyone’s see this or one like it before?


  • 1630Boston
    1630Boston Posts: 14,157 ✭✭✭✭✭
    Options

    Not the same type but must be same company, I'll keep searching :smile:
    Could your bar be extruded?

    Quatre Bonded Silver 999 Fine 10. 03 Troy Oz Bar
    Quatre Bonded Silver 999 Fine 10. 03 Troy Oz Bar Silver photo Category : Bullion > Silver > Bars & Rounds

    http://numismaclub.com/unt/16729-quatre_bonded_silver_999_fine_10___03_troy_oz_bar.html

    Successful transactions with : MICHAELDIXON, Manorcourtman, Bochiman, bolivarshagnasty, AUandAG, onlyroosies, chumley, Weiss, jdimmick, BAJJERFAN, gene1978, TJM965, Smittys, GRANDAM, JTHawaii, mainejoe, softparade, derryb, Ricko

    Bad transactions with : nobody to date

  • 1630Boston
    1630Boston Posts: 14,157 ✭✭✭✭✭
    Options

    Successful transactions with : MICHAELDIXON, Manorcourtman, Bochiman, bolivarshagnasty, AUandAG, onlyroosies, chumley, Weiss, jdimmick, BAJJERFAN, gene1978, TJM965, Smittys, GRANDAM, JTHawaii, mainejoe, softparade, derryb, Ricko

    Bad transactions with : nobody to date

  • WildIdea
    WildIdea Posts: 1,881 ✭✭✭✭✭
    Options

    @1630Boston said:

    Could your bar be extruded?

    I suppose, not sure if a sheet of metal is technically exstruded or not. I think of sheet metal as rolled and extruded as more like a play dough factory. Lol. But I guess a roller would have sides to it keeping it a certain width while being rolled.

    I buy steel at the yard for my metal projects and there are big shears and presses that break the metal to size. Sometimes a PM bar comes along that has the same look, I assume its the same technique and tools. Would make since to me and the process would be efficient and costs effective

  • asheland
    asheland Posts: 24,548 ✭✭✭✭✭
    Options

    @WildIdea said:
    I picked up this 10 Oz silver bar this week. QUATRE looks rolled and sheared. Maybe ground or trimmed to tune final weight. We couldn’t find anything online about it. Zilch. Paid 2.50 over just for something different factor. Anyone’s see this or one like it before?


    Very cool bar! Not sure about the maker, but I have a scarce Foster 1oz bar made similarly:
    It appears to be cut from sheet silver...

    My YouTube Channel

  • asheland
    asheland Posts: 24,548 ✭✭✭✭✭
    Options

    Not new, but very happy still with this semi-recent purchase:

    My YouTube Channel

  • 1630Boston
    1630Boston Posts: 14,157 ✭✭✭✭✭
    Options

    @WildIdea said:

    @1630Boston said:

    Could your bar be extruded?

    I suppose, not sure if a sheet of metal is technically exstruded or not. I think of sheet metal as rolled and extruded as more like a play dough factory. Lol. But I guess a roller would have sides to it keeping it a certain width while being rolled.

    **Cast vs. Poured vs. Pressed vs. Extruded **Silver Bars

    Successful transactions with : MICHAELDIXON, Manorcourtman, Bochiman, bolivarshagnasty, AUandAG, onlyroosies, chumley, Weiss, jdimmick, BAJJERFAN, gene1978, TJM965, Smittys, GRANDAM, JTHawaii, mainejoe, softparade, derryb, Ricko

    Bad transactions with : nobody to date

  • PerryHall
    PerryHall Posts: 47,763 ✭✭✭✭✭
    Options

    **Cast vs. Poured vs. Pressed vs. Extruded **Silver Bars

    Aren't cast and poured the same thing?

    Worry is the interest you pay on a debt you may not owe.
    "Paper money eventually returns to its intrinsic value---zero."----Voltaire
    "Everything you say should be true, but not everything true should be said."----Voltaire

  • Kkathyl
    Kkathyl Posts: 3,762 ✭✭✭✭✭
    Options

    Krug Proof

    Best place to buy !
    Bronze Associate member

  • OPA
    OPA Posts: 17,166 ✭✭✭✭✭
    Options

    @Kkathyl said:
    Krug Proof

    Are those milk spots on the obv? ( 6 & 8 o'clock )

    "Bongo drive 1984 Lincoln that looks like old coin dug from ground."
  • Kkathyl
    Kkathyl Posts: 3,762 ✭✭✭✭✭
    Options

    yup but they are not the good ones. This is metal porn thread so posted mine here.

    Best place to buy !
    Bronze Associate member

  • Cladiator
    Cladiator Posts: 18,353 ✭✭✭✭✭
    Options

    Up to ten of these little dudes now. They're becoming addicting. :)

  • Mesh
    Mesh Posts: 86 ✭✭✭
    Options


    Picked up all 4 $20
    should I clean or no clean ?

  • Weiss
    Weiss Posts: 9,942 ✭✭✭✭✭
    Options

    Any idea what that weight represents, @cmanbb ?

    We are like children who look at print and see a serpent in the last letter but one, and a sword in the last.
    --Severian the Lame
  • cmanbb
    cmanbb Posts: 1,059 ✭✭✭✭✭
    Options

    @Weiss said:
    Any idea what that weight represents, @cmanbb ?

    500g or half kilo. Engelhard used all 3 weight classes when they were producing these bars

  • Downtown1974
    Downtown1974 Posts: 7,189 ✭✭✭✭✭
    Options

    Love that half kilo, cman!!

  • cmanbb
    cmanbb Posts: 1,059 ✭✭✭✭✭
    Options

    Only 2 serial numbers away from a sequential pair I acquired a few months ago.

  • Smudge
    Smudge Posts: 10,001 ✭✭✭✭✭
    Options

    New Queen's Beast arrived today.

  • asheland
    asheland Posts: 24,548 ✭✭✭✭✭
    Options

    Newp from today:

    My YouTube Channel

  • Downtown1974
    Downtown1974 Posts: 7,189 ✭✭✭✭✭
    Options

    Nice Perth mint silver! I have a roll of Kookaburras. Can’t remember if they’re 2015 or 2016.

  • Hallco
    Hallco Posts: 3,727 ✭✭✭✭✭
    Options

    @Smudge said:
    New Queen's Beast arrived today.

    What is the newest one?

  • Smudge
    Smudge Posts: 10,001 ✭✭✭✭✭
    Options

    The Falcon. Not as fond of it as the others, but it is nice. Got it for my daughter, she wants them all.

  • Hallco
    Hallco Posts: 3,727 ✭✭✭✭✭
    Options

    @Smudge said:
    The Falcon. Not as fond of it as the others, but it is nice. Got it for my daughter, she wants them all.

    I just looked it up...was it supposed to be for 2019?

  • Smudge
    Smudge Posts: 10,001 ✭✭✭✭✭
    Options

    Apmex has them now. Mine is here.

  • OPA
    OPA Posts: 17,166 ✭✭✭✭✭
    Options

    received mine from APMEX on 9/26....Yes it's a 2019 dated coin...one more 2019 dated one coming out in March.

    "Bongo drive 1984 Lincoln that looks like old coin dug from ground."
  • kiyote
    kiyote Posts: 5,635 ✭✭✭✭✭
    Options

    Nothing new but I did get a new macro lens.


    "I'll split the atom! I am the fifth dimension! I am the eighth wonder of the world!" -Gef the talking mongoose.
  • Baley
    Baley Posts: 22,663 ✭✭✭✭✭
    Options

    Paid cash for two tons of steel, glass, leather, aluminum and rubber.

    Liberty: Parent of Science & Industry

  • OPA
    OPA Posts: 17,166 ✭✭✭✭✭
    Options

    @Baley said:
    Paid cash for two tons of steel, glass, leather, aluminum and rubber.

    What model year was it? ;)

    "Bongo drive 1984 Lincoln that looks like old coin dug from ground."
  • asheland
    asheland Posts: 24,548 ✭✭✭✭✭
    Options

    @Baley said:
    Paid cash for two tons of steel, glass, leather, aluminum and rubber.

    There might even be a fraction of a gram of Palladium in that package. :D

    My YouTube Channel

  • Baley
    Baley Posts: 22,663 ✭✭✭✭✭
    Options

    Right, didn't mention the minor amounts of precious metals or the more significant portions of plastics and other materials.

    Nothing spectacular, just a 2014 as a daily driver and possibly for the son to learn on in a few years..

    Liberty: Parent of Science & Industry

Categories