Home› U.S. Coin Forum

Should I send them to ANAC?

ParadisefoundParadisefound Posts: 8,621 ✭✭✭✭✭
in U.S. Coin Forum

Should I send all of these to ANAC?
<3 Will they be preserved better in the slab than leaving them in their flips?

Comments

  • oih82w8oih82w8 Posts: 12,770 ✭✭✭✭✭
    edited August 30, 2018 7:26PM

    I have sent some of my Dan Car pieces to ANACS before, but I am considering sending some to ICG. I like their holder better than the ANACS wedge top design.

    oih82w8 = Oh I Hate To Wait _defectus patientia_aka...Dr. Defecto - Curator of RMO's

    BST transactions: dbldie55, jayPem, 78saen, UltraHighRelief, nibanny, liefgold, FallGuy, lkeigwin, mbogoman, Sandman70gt, keets, joeykoins, ianrussell (@GC), EagleEye, ThePennyLady, GRANDAM, Ilikecolor, Gluggo, okiedude, Voyageur, LJenkins11, fastfreddie, ms70, pursuitofliberty, ZoidMeister,Coin Finder, GotTheBug, edwardjulio, Coinnmore, Nickpatton, Namvet69,...
  • DIMEMANDIMEMAN Posts: 22,403 ✭✭✭✭✭

    I wouldn't keep anything in soft plastic flips (PVC).

  • ParadisefoundParadisefound Posts: 8,621 ✭✭✭✭✭

    Is that where @Insider2 resides?

    @oih82w8 said:
    I have sent some of my Dan Car pieces to ANACS before, but I am considering sending some to ICG. I like their holder better than the ANACS wedge top design.

  • ctf_error_coinsctf_error_coins Posts: 15,433 ✭✭✭✭✭

    Airtights ;)

  • cameonut2011cameonut2011 Posts: 10,181 ✭✭✭✭✭

    @DIMEMAN said:
    I wouldn't keep anything in soft plastic flips (PVC).

    Does Carr use PVC flips?

  • SmudgeSmudge Posts: 9,873 ✭✭✭✭✭

    Airtight, dry and in the dark. Especially the silver and bronze. May be tough on the islands. Maybe best to send them in as you probably pull them out to admire fairly often.

  • bigjpstbigjpst Posts: 3,199 ✭✭✭✭✭

    @cameonut2011 said:

    @DIMEMAN said:
    I wouldn't keep anything in soft plastic flips (PVC).

    Does Carr use PVC flips?

    No. The flips he sends his coins in are usually hard plastic archival quality.

    JRobinsonRareCoins.com

    My Ebay Store

  • thefinnthefinn Posts: 2,657 ✭✭✭✭✭

    They are mylar, but they are open where they are folded.

    thefinn
  • GRANDAMGRANDAM Posts: 8,785 ✭✭✭✭✭

    @Paradisefound said:
    Is that where @Insider2 resides?

    Yes,,,,,

    GrandAm :)
  • ParadisefoundParadisefound Posts: 8,621 ✭✭✭✭✭

    ....a good idea >:)

    @GRANDAM said:

    @Paradisefound said:
    Is that where @Insider2 resides?

    Yes,,,,,

  • GRANDAMGRANDAM Posts: 8,785 ✭✭✭✭✭
    edited August 30, 2018 8:16PM

    I'm sure he will make time for you.

    GrandAm :)
  • BullsitterBullsitter Posts: 5,990 ✭✭✭✭✭
    edited August 31, 2018 1:00PM

    I have 38 pieces at ANACS, they received them Wednesday. I like them in hard plastic better than flips, for protection.
    With last months special and shipping both ways cost was about $12 each.

  • rickoricko Posts: 98,724 ✭✭✭✭✭

    My recommendation would be airtites or self slab....Cheers, RickO

  • ElKevvoElKevvo Posts: 4,172 ✭✭✭✭✭

    @Twobitcollector said:
    So I've been doing some self slabbing.

    Actually that is not a bad idea at all I and I think I will do that with my small DC collection. The flips are great for those who submit but for those who do not we have to find an alternative. Could be a decent service for Dan to add to his product line, a nice self slab with labels for an extra 10.00 or so.

    K

    ANA LM
  • TurboSnailTurboSnail Posts: 1,669 ✭✭✭✭✭

    I do not own a single ICG slab. But if insider2 is willing to put a little sticker on the upper corner of the slab. I will dig it!

  • johnny9434johnny9434 Posts: 29,856 ✭✭✭✭✭

    air tights

  • ashelandasheland Posts: 24,053 ✭✭✭✭✭

    @Paradisefound said:
    Do you think he'll have time to grade all of mine aside of his postings?

    @GRANDAM said:

    @Paradisefound said:
    Is that where @Insider2 resides?

    Yes,,,,,

    :D

    My YouTube Channel

  • ashelandasheland Posts: 24,053 ✭✭✭✭✭

    @cmerlo1 said:
    ANACS does a good job, and you get a custom label, designed by Dan Carr himself:

    Seeing that, I'd send them to ANACS. Those look cool.

    My YouTube Channel

  • Insider2Insider2 Posts: 14,452 ✭✭✭✭✭
    edited August 31, 2018 10:33AM

    @cmerlo1 said: "ANACS does a good job, and you get a custom label, designed by Dan Carr…"

    AFAIK, any TPGS offers custom labels upon request. Some of them cost a little extra.

    @Paradisefound asked: "Do you think he'll [Insider] have time to grade all of mine aside of his postings?"

    As one of my official duties besides customer service, I monitor the Chat Boards in order to help collectors. Due to this, I gladly must work 10+ hours a day in order to keep our turnaround times extremely fast. What am I going to do instead, rush home to watch "Paradise Island?"

    I'm a true "Coinhead" with no real life! The company I work for is very fortunate not to be cranking out 10K + coins a week as the top two services must.

    Bring them on! :)

    PS As for time spent on the Internet young lady... B)

  • drfishdrfish Posts: 950 ✭✭✭✭

    I keep mine in Dan’s flips which are Guardhouse archival flips then stored in the Lighthouse Interect Shield box for 2x2s. So far no toning on stuff directly from Dan. The coins/medals I’ve purchased in the aftermarket that had some rim toning haven’t progressed.
    In fact a big part of the appeal of Dan’s fantasy overstrikes is viewing/holding a perfect coin (that would cost thousands to millions if real ). Slabs kind of kill that for me, the flips remind me of my childhood collection.

  • TwobitcollectorTwobitcollector Posts: 4,127 ✭✭✭✭✭

    @ElKevvo said:

    @Twobitcollector said:
    So I've been doing some self slabbing.

    Actually that is not a bad idea at all I and I think I will do that with my small DC collection. The flips are great for those who submit but for those who do not we have to find an alternative. Could be a decent service for Dan to add to his product line, a nice self slab with labels for an extra 10.00 or so.

    K

    I make copies of the insert.that way I still have the original

    Positive BST Transactions with:
    INYNWHWeTrust-TexasNationals,ajaan,blu62vette
    coinJP, Outhaul ,illini420,MICHAELDIXON, Fade to Black,epcjimi1,19Lyds,SNMAN,JerseyJoe, bigjpst, DMWJR , lordmarcovan, Weiss,Mfriday4962,UtahCoin,Downtown1974,pitboss,RichieURich,Bullsitter,JDsCoins,toyz4geo,jshaulis, mustanggt, SNMAN, MWallace, ms71, lordmarcovan
  • KudbegudKudbegud Posts: 4,735 ✭✭✭✭✭
    edited August 31, 2018 12:10PM

    @Twobitcollector said:
    I get temped sometimes, the insider special ends today.
    I stopped using them when they sent a submission back via smart post.
    So I've been doing some self slabbing.

    DIY slabs are a reasonable middle ground between non-PVC flips and TPG graded slabs. Reasonably priced via Ebay, Amos Advantage and Amazon.

    The ones @Twobitcollector uses look close to the PCGS ones (without the grading of course) Both sides visible and the edge mostly too. With space for Dan's description insert or self ones like @Twobitcollector uses.

    Maybe he will tell us which brand and where he gets them.


  • BullsitterBullsitter Posts: 5,990 ✭✭✭✭✭
    edited August 31, 2018 12:37PM

    Here's the Clark Gruber label available for the CG pieces.

  • ashelandasheland Posts: 24,053 ✭✭✭✭✭

    @Bullsitter said:
    Here's the Clark Gruber label available for the CG pieces.

    That’s so cool!!!

    My YouTube Channel

  • CatbertCatbert Posts: 7,837 ✭✭✭✭✭

    Save your money! Airtites are a lot cheaper!

    Seated Half Society member #38

    "She comes out of the sun in a silk dress,
    running like a water color in the rain...."
  • meluaufeetmeluaufeet Posts: 768 ✭✭✭

    I'd love to see the silver in a dansco...
    Shout out to D.C. and Dansco, hook up!

Leave a Comment

BoldItalicStrikethroughOrdered listUnordered list
Format
SpoilerCodeQuote
Heading 2Heading 1
Emoji
:):D:(;):/:o:s:p:'(:|B):#:*<3o:)>:)
Url
Image
Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights
Drop image/file
Home • U.S. Coin ForumComment As ...