Should I send them to ANAC?

Paradisefound · August 30, 2018 7:56PM

Should I send all of these to ANAC?
Will they be preserved better in the slab than leaving them in their flips?

oih82w8 · August 30, 2018 8:25PM

I have sent some of my Dan Car pieces to ANACS before, but I am considering sending some to ICG. I like their holder better than the ANACS wedge top design.

jedm · August 30, 2018 8:26PM

Yes all of them except the gold one at 2:00.... send that one to me!

DIMEMAN · August 30, 2018 8:26PM

I wouldn't keep anything in soft plastic flips (PVC).

Paradisefound · August 30, 2018 8:27PM

Is that where @Insider2 resides?

@oih82w8 said:
I have sent some of my Dan Car pieces to ANACS before, but I am considering sending some to ICG. I like their holder better than the ANACS wedge top design.

ctf_error_coins · August 30, 2018 8:28PM

Airtights

cameonut2011 · August 30, 2018 8:35PM

@DIMEMAN said:
I wouldn't keep anything in soft plastic flips (PVC).

Does Carr use PVC flips?

Smudge · August 30, 2018 8:39PM

Airtight, dry and in the dark. Especially the silver and bronze. May be tough on the islands. Maybe best to send them in as you probably pull them out to admire fairly often.

bigjpst · August 30, 2018 8:55PM

@cameonut2011 said:

@DIMEMAN said:
I wouldn't keep anything in soft plastic flips (PVC).

Does Carr use PVC flips?

No. The flips he sends his coins in are usually hard plastic archival quality.

thefinn · August 30, 2018 8:58PM

They are mylar, but they are open where they are folded.

GRANDAM · August 30, 2018 9:05PM

@Paradisefound said:
Is that where @Insider2 resides?

Yes,,,,,

Paradisefound · August 30, 2018 9:09PM

....a good idea

@GRANDAM said:

@Paradisefound said:
Is that where @Insider2 resides?

Yes,,,,,

Paradisefound · August 30, 2018 9:13PM

Do you think he'll have time to grade all of mine aside of his postings?

@GRANDAM said:

@Paradisefound said:
Is that where @Insider2 resides?

Yes,,,,,

GRANDAM · August 30, 2018 9:16PM

I'm sure he will make time for you.

Bullsitter · August 30, 2018 9:40PM

I have 38 pieces at ANACS, they received them Wednesday. I like them in hard plastic better than flips, for protection.
With last months special and shipping both ways cost was about $12 each.

Twobitcollector · August 31, 2018 2:41AM

I get temped sometimes, the insider special ends today.
I stopped using them when they sent a submission back via smart post.
So I've been doing some self slabbing.

ricko · August 31, 2018 7:10AM

My recommendation would be airtites or self slab....Cheers, RickO

ElKevvo · August 31, 2018 7:26AM

@Twobitcollector said:
So I've been doing some self slabbing.

Actually that is not a bad idea at all I and I think I will do that with my small DC collection. The flips are great for those who submit but for those who do not we have to find an alternative. Could be a decent service for Dan to add to his product line, a nice self slab with labels for an extra 10.00 or so.

K

TurboSnail · August 31, 2018 7:46AM

I do not own a single ICG slab. But if insider2 is willing to put a little sticker on the upper corner of the slab. I will dig it!

johnny9434 · August 31, 2018 7:49AM

air tights

cmerlo1 · August 31, 2018 8:09AM

ANACS does a good job, and you get a custom label, designed by Dan Carr himself:

asheland · August 31, 2018 11:11AM

@Paradisefound said:
Do you think he'll have time to grade all of mine aside of his postings?

@GRANDAM said:

@Paradisefound said:
Is that where @Insider2 resides?

Yes,,,,,

asheland · August 31, 2018 11:13AM

@cmerlo1 said:
ANACS does a good job, and you get a custom label, designed by Dan Carr himself:

Seeing that, I'd send them to ANACS. Those look cool.

Insider2 · August 31, 2018 11:31AM

@cmerlo1 said: "ANACS does a good job, and you get a custom label, designed by Dan Carr…"

AFAIK, any TPGS offers custom labels upon request. Some of them cost a little extra.

@Paradisefound asked: "Do you think he'll [Insider] have time to grade all of mine aside of his postings?"

As one of my official duties besides customer service, I monitor the Chat Boards in order to help collectors. Due to this, I gladly must work 10+ hours a day in order to keep our turnaround times extremely fast. What am I going to do instead, rush home to watch "Paradise Island?"

I'm a true "Coinhead" with no real life! The company I work for is very fortunate not to be cranking out 10K + coins a week as the top two services must.

Bring them on!

PS As for time spent on the Internet young lady...

drfish · August 31, 2018 11:55AM

I keep mine in Dan’s flips which are Guardhouse archival flips then stored in the Lighthouse Interect Shield box for 2x2s. So far no toning on stuff directly from Dan. The coins/medals I’ve purchased in the aftermarket that had some rim toning haven’t progressed.
In fact a big part of the appeal of Dan’s fantasy overstrikes is viewing/holding a perfect coin (that would cost thousands to millions if real ). Slabs kind of kill that for me, the flips remind me of my childhood collection.

Twobitcollector · August 31, 2018 12:49PM

@ElKevvo said:

@Twobitcollector said:
So I've been doing some self slabbing.

Actually that is not a bad idea at all I and I think I will do that with my small DC collection. The flips are great for those who submit but for those who do not we have to find an alternative. Could be a decent service for Dan to add to his product line, a nice self slab with labels for an extra 10.00 or so.

K

I make copies of the insert.that way I still have the original

Kudbegud · August 31, 2018 1:09PM

@Twobitcollector said:
I get temped sometimes, the insider special ends today.
I stopped using them when they sent a submission back via smart post.
So I've been doing some self slabbing.

DIY slabs are a reasonable middle ground between non-PVC flips and TPG graded slabs. Reasonably priced via Ebay, Amos Advantage and Amazon.

The ones @Twobitcollector uses look close to the PCGS ones (without the grading of course) Both sides visible and the edge mostly too. With space for Dan's description insert or self ones like @Twobitcollector uses.

Maybe he will tell us which brand and where he gets them.

Bullsitter · August 31, 2018 1:36PM

Here's the Clark Gruber label available for the CG pieces.

asheland · August 31, 2018 3:19PM

@Bullsitter said:
Here's the Clark Gruber label available for the CG pieces.

That’s so cool!!!

Catbert · August 31, 2018 4:19PM

Save your money! Airtites are a lot cheaper!

meluaufeet · August 31, 2018 10:22PM

I'd love to see the silver in a dansco...
Shout out to D.C. and Dansco, hook up!

Should I send them to ANAC?

Comments

Leave a Comment

Categories