Home U.S. Coin Forum
Options

I found an interesting counterfeit Peace dollar yesterday

MeltdownMeltdown Posts: 9,252 ✭✭✭✭✭
I don't collect counterfeits, but while searching through a large pile of melt silver dollars yesterday, I spotted this.
I showed it to the shop owner and we discussed it for a bit. I ended up taking it home as a novelty.
It weighs 24.1 grams and appears to have been cast rather than struck. It's just slightly larger in diameter than a real Peace dollar.
There's a seam around the edge.... Maybe where they stuck the front & back together? Anybody have any information other than what I've described?
It's dated 1935-S

Edited to add the correct weight.

image
image
image

Comments

  • Options
    CaptHenwayCaptHenway Posts: 33,960 ✭✭✭✭✭
    That may be a vintage counterfeit, circa 1935-45. I couldn't prove it.
    Numismatist. 54 year member ANA. Former ANA Senior Authenticator. Winner of four ANA Heath Literary Awards; three Wayte and Olga Raymond Literary Awards; Numismatist of the Year Award 2009, and ANA Lifetime Achievement Award 2020. Also won the PNG's Robert Friedberg Award for "The Enigmatic Lincoln Cents of 1922," Available now from Whitman or Amazon.
  • Options
    AUandAGAUandAG Posts: 25,036 ✭✭✭✭✭
    I'd say that is a really cool contemporary piece!

    bobimage
    Registry: CC lowballs (boblindstrom), bobinvegas1989@yahoo.com
  • Options
    guitarwesguitarwes Posts: 9,308 ✭✭✭

    Pretty cool piece. All I can add is that I bet it wasn't made before 1935.

    image
    @ Elite CNC Routing & Woodworks on Facebook. Check out my work.
    Too many positive BST transactions with too many members to list.
  • Options
    TwoSides2aCoinTwoSides2aCoin Posts: 45,063 ✭✭✭✭✭
    Wow. That's like an "ultra-light". I've seen a few Morgans and Trade Dollars come up short. Like 18 to 24 grams, and even a few that weighed right. Wonder what the alloy is.
  • Options
    JJMJJM Posts: 8,128 ✭✭✭✭✭
    image
    👍BST's erickso1,cone10,MICHAELDIXON,TennesseeDave,p8nt,jmdm1194,RWW,robkool,Ahrensdad,Timbuk3,Downtown1974,bigjpst,mustanggt,Yorkshireman,idratherbgardening,SurfinxHI,derryb,masscrew,Walkerguy21D,MJ1927,sniocsu,Coll3tor,doubleeagle07,luciobar1980,PerryHall,SNMAM,mbcoin,liefgold,keyman64,maprince230,TorinoCobra71,RB1026,Weiss,LukeMarshall,Wingsrule,Silveryfire, pointfivezero,IKE1964,AL410, Tdec1000, AnkurJ,guitarwes,Type2,Bp777,jfoot113,JWP,mattniss,dantheman984,jclovescoins,Collectorcoins,Weather11am,Namvet69,kansasman,Bruce7789,ADG,Larrob37,Waverly, justindan
  • Options
    MsMorrisineMsMorrisine Posts: 39,569 ✭✭✭✭✭
    I've never seen a real counterfeit in person, but a mould would have two pieces and a join line.


    that is one sloppy join line.


    Current maintainer of Stone's Master List of Favorite Websites // My BST transactions
  • Options
    MeltdownMeltdown Posts: 9,252 ✭✭✭✭✭


    << <i>Wow. That's like an "ultra-light". I've seen a few Morgans and Trade Dollars come up short. Like 18 to 24 grams, and even a few that weighed right. Wonder what the alloy is. >>




    Ooops. I mis-spoke and it does weigh 24grams. I'm not sure of the alloy, but it has almost no ping to it when you flip it.
  • Options
    JcarneyJcarney Posts: 3,154


    << <i>

    << <i>Wow. That's like an "ultra-light". I've seen a few Morgans and Trade Dollars come up short. Like 18 to 24 grams, and even a few that weighed right. Wonder what the alloy is. >>




    Ooops. I mis-spoke and it does weigh 24grams. I'm not sure of the alloy, but it has almost no ping to it when you flip it. >>



    Probably pot metal. Primarily zinc with a very low melting point. Widely used to make cheap castings where material strength isn't an issue.
    “When the people find that they can vote themselves money, that will herald the end of the republic.” — Benjamin Franklin


    My icon IS my coin. It is a gem 1949 FBL Franklin.

Leave a Comment

BoldItalicStrikethroughOrdered listUnordered list
Emoji
Image
Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights
Drop image/file