Home› U.S. Coin Forum
Options

Cent Composition Change

erwindocerwindoc Posts: 5,466 ✭✭✭✭✭
Looks like Congress is at it again.

Press Release

Why don't they just not mint 1c and 5c for a year or more and see how it goes? Maybe even hold off on everything? There has to be plenty of these things lying around to meet the need for a couple of years.

Comments

  • Options
    They always want to use a heavy composition, why not titanium? It can be struck very thin with very high detail then hardened.
  • Options
    LanceNewmanOCCLanceNewmanOCC Posts: 19,999 ✭✭✭✭✭


    << <i>Why don't they just not mint 1c and 5c for a year or more and see how it goes? >>



    seriously, it is the first thought i have virtually every time i read/hear about this topic. to mint or not? why so black and white?

    certainly it doesn't take minting 500 billion coins to justify all the work/effort/cost to get the designs/dies/labor, etc. to average out the cost per coin?

    how the heck hard is it just to put out say 25 million per year or a bit less even?

    i would say make only 1-5 million but we all know they would end up in ms70 holders selling for 299.99, so minting too low a number isn't an option if they are minting them for public use.

    or just skipping years?

    or is this just another one of those political spending money job protection things? i can just hear it now, "weep weep, if we stop minting 300 trillion coins, think about the job loss!" duh, sometimes losing

    jobs is not a bad thing if the juice isn't worth the squeeze to keep them. ya, i said it.

    makes me think of the prime example that gets analyzed a lot: if criminals stopped breaking laws, imagine all the people that would be out of work. apologies but this coin minting thing really feels just like

    criminal job line imo.

    heck, if the gov stopped the drug flow, who would be left to fight and what would they do with all those useful extra tax dollars? is there really anyone left out there that we haven't tried to blow up?

    is it really such a bad idea to spend a bit extra on kids educations and well being? ya ya, it is the main political cliche line but it is also a very good place to spend imo.
    .

    <--- look what's behind the mask! - cool link 1/NO ~ 2/NNP ~ 3/NNC ~ 4/CF ~ 5/PG ~ 6/Cert ~ 7/NGC 7a/NGC pop~ 8/NGCF ~ 9/HA archives ~ 10/PM ~ 11/NM ~ 12/ANACS cert ~ 13/ANACS pop - report fakes 1/ACEF ~ report fakes/thefts 1/NCIS - Numi-Classes SS ~ Bass ~ Transcribed Docs NNP - clashed coins - error training - V V mm styles -

  • Options
    MsMorrisineMsMorrisine Posts: 40,329 ✭✭✭✭✭


    << <i>Looks like Congress is at it again.

    Press Release

    Why don't they just not mint 1c and 5c for a year or more and see how it goes? Maybe even hold off on everything? There has to be plenty of these things lying around to meet the need for a couple of years. >>





    1) Congress at it again?
    +a) Congress mandates the mint report on metals research
    +b) the mint reports every 2 years
    +c) 2014 is a reporting year and this is likely part of that process

    2) short runs
    +a) Not minting them or doing half runs would be an interesting experiment to see if they could shake some change loose.
    +b) if the point is to test the waters for nickel increments, then I'm thinking even a test would never pass either half of Congress.

    ======================

    3) The mint has already ruled out all metals for the cent. The current composition is approximately the same cost as the other alternatives: steel and aluminum

    4) I'm not sure if the mint is also considering changing the physical dimensions of the coins. However, the only coins with a pressing need for alteration are the cent and nickel. All others are profitable, even and especially the dollar coin.

    Current maintainer of Stone's Master List of Favorite Websites // My BST transactions
  • Options
    BaronVonBaughBaronVonBaugh Posts: 1,839 ✭✭✭✭
    Stop making the nickel and start making the half dime again. That would lower the material required to make a 5c piece.
    Lets put a Liberty head on it.
  • This content has been removed.
  • Options
    MsMorrisineMsMorrisine Posts: 40,329 ✭✭✭✭✭
    Americans can't even speak european, they reject metric and you think they are going to copy their .10 rounding?


    never! image

    Current maintainer of Stone's Master List of Favorite Websites // My BST transactions
  • This content has been removed.
  • Options
    ShamikaShamika Posts: 18,785 ✭✭✭✭


    << <i>They always want to use a heavy composition, why not titanium? It can be struck very thin with very high detail then hardened. >>



    FWIW: Titanium has very LOW density. You may be thinking of tungsten.

    Also, both of these materials are very expensive and very difficult to work with so neither are good alternatives.


    Buyer and seller of vintage coin boards!
  • Options
    MrHalfDimeMrHalfDime Posts: 3,440 ✭✭✭✭
    "Stop making the nickel and start making the half dime again."

    Now you're talking! I would certainly support that idea. Give my series a few more years to collect.
    They that can give up essential Liberty to obtain a little temporary safety deserve neither Liberty nor safety. Benjamin Franklin
  • Options
    lkeigwinlkeigwin Posts: 16,895 ✭✭✭✭✭
    Declare the cent worth 2c and watch them come out in droves. No need to mint more.
    Lance.
  • Options
    KudbegudKudbegud Posts: 4,735 ✭✭✭✭✭
    This will never happen but I'll go out on the proverbial limb: do away with the cent and nickle, make a 3 cent piece the same size, weight and material as the cent (or between the cent and nickle, but new sizes generate opposition) AND round to 10 cents. Radical huh. Let it rattle around between your ears before you dismiss it out of hand.

  • Options
    rec78rec78 Posts: 5,969 ✭✭✭✭✭
    I think we should get rid of the nickel and cent and make a 1/3 dime coin. It would be equal to 3.33 cents, two would be worth 6.67 cents and three would be worth 10 cents.

    Or even better- get rid of the cent, nickel, and dime and make a 1-bit coin equal to 12 1/2 cents since 2 bits equals a quarter and use that as the smallest denomination. But it would be best if we stopped minting all coins except quarters and just round everything to the nearest quarter. Transactions would be a lot easier with a single coin denomination.

    But really though, do you really think that politicians will want their own removed from coins? Politicians got us into this mess and we are stuck here until common sense (I know, it does not exist in politics anymore) takes over.
    image
  • Options
    Shamika I was actually thinking titanium as I have used it in jewelry making and when it is in it's non hardened state it is easy to work with as it is very soft. That's why I was thinking of it as it is easy to color (anodize) and could be made in some neat colors. After hardening the coins would be very durable but most likely to light to use in a vending machine. My main thought was that striking the coins would require much less pressure and thus the dies and machinery would have a much longer lifespan. The other issue I see would be the need to retrofit for heat treating but efficient inductive units could be used for this process and would take less room and generate less outward heat than a flame heating system.
  • Options
    rickoricko Posts: 98,721 ✭✭✭✭✭
    Either new coinage, elimination of the cent and nickel, or a super economic crash (necessitating an entire restructuring of the economy) will become necessary in the foreseeable future. I would bet on the economic crash as most likely.... Cheers, RickO
  • Options
    sumnomsumnom Posts: 5,963 ✭✭✭


    << <i>I think we should get rid of the nickel and cent and make a 1/3 dime coin. It would be equal to 3.33 cents, two would be worth 6.67 cents and three would be worth 10 cents.

    Or even better- get rid of the cent, nickel, and dime and make a 1-bit coin equal to 12 1/2 cents since 2 bits equals a quarter and use that as the smallest denomination. But it would be best if we stopped minting all coins except quarters and just round everything to the nearest quarter. Transactions would be a lot easier with a single coin denomination.

    But really though, do you really think that politicians will want their own removed from coins? Politicians got us into this mess and we are stuck here until common sense (I know, it does not exist in politics anymore) takes over. >>



    No you're cooking with gas! Perhaps we could start a discussion about minting a 22/7-cent coin but that would just go on and on and we certainly could not count on people being rational about it.
  • Options
    MsMorrisineMsMorrisine Posts: 40,329 ✭✭✭✭✭


    << <i>

    << <i>I think we should get rid of the nickel and cent and make a 1/3 dime coin. It would be equal to 3.33 cents, two would be worth 6.67 cents and three would be worth 10 cents.

    Or even better- get rid of the cent, nickel, and dime and make a 1-bit coin equal to 12 1/2 cents since 2 bits equals a quarter and use that as the smallest denomination. But it would be best if we stopped minting all coins except quarters and just round everything to the nearest quarter. Transactions would be a lot easier with a single coin denomination.

    But really though, do you really think that politicians will want their own removed from coins? Politicians got us into this mess and we are stuck here until common sense (I know, it does not exist in politics anymore) takes over. >>



    No you're cooking with gas! Perhaps we could start a discussion about minting a 22/7-cent coin but that would just go on and on and we certainly could not count on people being rational about it. >>



    close!

    22/7 isn't π = 3.1415.....

    and as a fraction, it is a ratio and is therefore a rational number. but the idea still flies!

    if π is too greek, we could use e = 2.71828... or i to the i power = 0.207879576...

    Current maintainer of Stone's Master List of Favorite Websites // My BST transactions
  • Options
    BStrauss3BStrauss3 Posts: 3,908 ✭✭✭✭✭
    At the recent congressional hearing, both a representative of the Royal Mint and the US Mint said no matter what we changed to, it will still cost more than 1c to mint a cent...



    http://www.numismaticnews.net/article/news/general/mint-testifies-before-house-on-coinage-composition-changes





    << <i>The Royal Mint’s Andrew Mills demurred, saying he would have to look at the matter more closely, but he did volunteer that it would not cost less than the one cent face value, which emphasized a point made earlier in the hearing by Deputy Mint Director Richard A. Peterson in his testimony, who said no composition change could bring costs of the cent down below face value. >>

    -----Burton
    ANA 50+ year/Life Member (now "Emeritus")
    Author: 3rd Edition of the SampleSlabs book, https://sampleslabs.info/
  • Options
    messydeskmessydesk Posts: 20,912 ✭✭✭✭✭


    << <i>Americans can't even speak european, they reject metric and you think they are going to copy their .10 rounding? >>


    Most people would take it in stride. It's the demagogues who would have you believe otherwise.
  • Options
    MsMorrisineMsMorrisine Posts: 40,329 ✭✭✭✭✭


    << <i>At the recent congressional hearing, both a representative of the Royal Mint and the US Mint said no matter what we changed to, it will still cost more than 1c to mint a cent...



    http://www.numismaticnews.net/article/news/general/mint-testifies-before-house-on-coinage-composition-changes





    << <i>The Royal Mint’s Andrew Mills demurred, saying he would have to look at the matter more closely, but he did volunteer that it would not cost less than the one cent face value, which emphasized a point made earlier in the hearing by Deputy Mint Director Richard A. Peterson in his testimony, who said no composition change could bring costs of the cent down below face value. >>

    >>




    metal value for the cent is about $0.0055
    Just SG&A for the cent is $0.0025
    Distribution to the Fed is $0.0002

    That's $0.0082 right there even before manufacture expenses and stuffing them into bags before shipment.

    the mint lists cost of goods sold as $0.0156, which includes the metal value and the cost of making it into blanks, minting them, then packaging them.... but not the SG&A and Distrib. The total was $0.0183 per cent made.


    It is interesting to note that $0.0183 - the $0.0055 metal value is still greater than 1 cent ($0.0128)... perhaps those questions asking if the other mints can do things cheaper would be reflective of many a mindset here, including my own, that the US government doesn't do thing on the cheap. Hmmm... I wonder. Still, with $0.0055 of the 1 cent being metal alone, one wonders what item could be fashioned for 1 cent per these days even on the order of billions of them per year... or despite them needing billions per year.



    Current maintainer of Stone's Master List of Favorite Websites // My BST transactions
  • Options
    Type2Type2 Posts: 13,985 ✭✭✭✭✭
    Just mint half of what they do now. image


    Hoard the keys.

Leave a Comment

BoldItalicStrikethroughOrdered listUnordered list
Emoji
Image
Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights
Drop image/file