2009 - Last Year for Satin Finish?

I just read a blog entry that the Mint has announced that 2009 will be the end of the Satin Finish runs for the mint sets. I have not confirmed this independantly and was curious if any others heard this, or have more facts.
If this is true, do you think we will see a rise in value for Satin Finish ? I personally would welcome the end of the line for the Satin Finish sets.
If this is true, do you think we will see a rise in value for Satin Finish ? I personally would welcome the end of the line for the Satin Finish sets.
"I find that a great part of the information I have was acquired by looking up something and finding something else on the way." - Franklin Pierce Adams
Positive BST Transactions: kalshacon
Positive BST Transactions: kalshacon
0
Comments
The name is LEE!
While there probably would be some increased interest in satin finish coins there
could be a virtual run on the '05 to '09 coins that aren't satin finish.
<< <i>It's hard for me to believe the rumor is true. The older mint set coins (especially in the 1970s and early '80s) were often junk with loads of scratches and poor eye appeal. If the mint is going to charge big bucks for these coins, they will need to keep the quality up. >>
Personally, I would like the US Mint to offer collector rolls of the regular circulating coinage. I'd pay a couple of bucks premium for a roll of 2009 Nickels and dimes.
Given the difficult economic times, it might just be a program they should consider.
The name is LEE!
Do people who collect new coins for each year have a regular business strike in addition to the satin finish coin, or are they considered interchangeable?
My Adolph A. Weinman signature

<< <i>Can't they offer better quality coins without a special finish? They could make a run of coins that are handled with a little more care rather than scooping them up with a shovel from a regular run.
Do people who collect new coins for each year have a regular business strike in addition to the satin finish coin, or are they considered interchangeable? >>
Personally, I've updated my Dansco albums the last few years by breaking open a Mint Set. So I guess I don't actually have the business strikes, but I don't really care. At least not at this point in my collecting life. I'm sure there are some people with Registry Sets who care to have both.
commoncents123, JrGMan2004, Coll3ctor (2), Dabigkahuna, BAJJERFAN, Boom, GRANDAM, newsman, cohodk, kklambo, seateddime, ajia, mirabela, Weather11am, keepdachange, gsa1fan, cone10
-------------------------
<< <i>It's an interesting rumor.
While there probably would be some increased interest in satin finish coins there
could be a virtual run on the '05 to '09 coins that aren't satin finish. >>
Can you clarify this for me, CladKing? Thanks!
commoncents123, JrGMan2004, Coll3ctor (2), Dabigkahuna, BAJJERFAN, Boom, GRANDAM, newsman, cohodk, kklambo, seateddime, ajia, mirabela, Weather11am, keepdachange, gsa1fan, cone10
-------------------------
Hoard the keys.
NO MORE TWO SETS OF MODERN COINS NEEDED FOR MY SET !!!
<< <i>2009 - Last Year for Satin Finish?
>>
Man ...I wish it were true...!!!..I'm tired of getting soaked with all the different kinds of finishes to keep my moderns up to date...!!!
<< <i>Can't they offer better quality coins without a special finish? They could make a run of coins that are handled with a little more care rather than scooping them up with a shovel from a regular run. >>
I agree with the sentiment.
The mint set coins since 1964 have been about two cuts above those
made for circulation but the quality is still often abysmal. The primary
problem is scratching and gouging but they usually have other defects
as well from oblique strikes to retained planchet marking.
It may not be reasonable to expect every coin in every set to be a gem
but it would seem they could do a lot better than 1: 300 like the '76
type I Ike.
The mint set coins are specially made on numismatic presses with new
dies and higher tonnage but it does look like they were often scooped
up with a shovel.
<< <i>
Do people who collect new coins for each year have a regular business strike in addition to the satin finish coin, or are they considered interchangeable? >>
I should think for most collectors there is little alternative.
Do people who collect new coins for each year have a regular business strike in addition to the satin finish coin, or are they considered interchangeable? >>
YOU HAVE TO HAVE BOTH FOR the complete dime set !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
R E A L L Y S U C K S !!!
<< <i>Do people who collect new coins for each year have a regular business strike in addition to the satin finish coin, or are they considered interchangeable? >>
For the 2009 Lincoln cents they'll need both a circulation strike and a satin finish, because of the different metal compositions.
My Adolph A. Weinman signature

I always thought that it was a bad idea to change finishes in the middle of the statehood quarter series. Maybe the Mint listed to complaints. Who knows????
TD
1 - The mint does not sell a "Satin Finish" set, they are uncirculated ! - But we know they are Satin Finish.
2 - If you ask a mint employee about the satin finish sets, they say we don't have any, just uncirculated sets. (Refer to point#1)
Gardnerville, NV
=========================
Our Website -->Innovation, Native & Presidential Dollar Errors, Lincoln Cents and more
Check it out --> Our eBay Auctions
<< <i><<
Do people who collect new coins for each year have a regular business strike in addition to the satin finish coin, or are they considered interchangeable? >>
YOU HAVE TO HAVE BOTH FOR the complete dime set !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
R E A L L Y S U C K S !!! >>
This is why I was against the satin finish Mint Sets from the start. Did anyone even ask for them? I don't maintain year sets so I don't really care, but I see business strike rolls from the satin finish years potentially as valuable as those from 1983, unless they were saved in high quantities. That could make the 2009 rolls, especially dimes and nickels, extremely valuable in years to come due to the relatively low mintages. Who would have thought a roll of 1983 quarters would be worth $1,000 (according to NN price guide)?
Text
---------------------------------------------------------------------------------------------------------------------------------------
BONGO HURTLES ALONG THE RAIN SODDEN HIGHWAY OF LIFE ON UNDERINFLATED BALD RETREAD TIRES
<< <i>At the United States Mint, we use the term uncirculated when referring to the special coining process used to make the coin, which gives it a satin finish. Uncirculated coins are manufactured using the same process as circulating coins, but with quality enhancements such as slightly higher coining force, early strikes from dies, special cleaning after stamping, and special packaging. Uncirculated coins may vary to some degree because of blemishes, toning, or slight imperfections.
Text >>
As I said....They are not going to give this up...its a revenue generator!
Gardnerville, NV
=========================
Our Website -->Innovation, Native & Presidential Dollar Errors, Lincoln Cents and more
Check it out --> Our eBay Auctions
<< <i>
As I said....They are not going to give this up...its a revenue generator! >>
They've been using the exact same process to make mint set
coins since 1965 except dies weren't basined after 1967.
The only change made for the satin finish in 2005 was chrome
plating the dies.
The only way it would be a revenue enhancement is if sales in-
creased which doesn't appear to be the case. Perhaps they
are assuming increased numbers of "circulating coin" being set
aside and are counting it as well. They do get some credit for
total production so this might be why they did it.
http://ProofCollection.Net
Well, just Love coins, period.
last few years for the mint sets. If they are down then the mint has
a lot of unused capacity that they might want to use and the most
obvious way is stop using the SF.
The sets are so massive now days that one has to be careful in mak-
ing capacity comparisons. The amount of packaging and assembly is
far higher than with the pre-'99 sets.
Dan
">Franklin Halves
">Kennedy Halves
<< <i>Tha Satin Finish set's have been a burrr in my butt from the start. I for one would not miss them a bit --- now if only PCGS would get them out of the "Circulated " set's I would be doing cartwheels. I never have collected them and never will, I only collect circulation strike coins.
Dan >>
Amen! If it's not a business strike, it's not a coin, it's a US Mint souvenir.
(Flame away. )
<< <i>
<< <i>Tha Satin Finish set's have been a burrr in my butt from the start. I for one would not miss them a bit --- now if only PCGS would get them out of the "Circulated " set's I would be doing cartwheels. I never have collected them and never will, I only collect circulation strike coins.
Dan >>
Amen! If it's not a business strike, it's not a coin, it's a US Mint souvenir.
(Flame away. )
Personally, I have yet to persue these type of nickels for my collection. Why? With most grading 68 and 69, what's there to collect?
But I won't go into that now.
On another note,
What's up with the 2009-P business strike? Suddenly we have some 70+ MS66FS coins showing up in the pops. Could they be satin finish coins mistakenly graded as business strikes? And not one has surfaced for sales. Who has the story on these? Anybody?
Leo
The more qualities observed in a coin, the more desirable that coin becomes!
My Jefferson Nickel Collection
<< <i>
<< <i>Can't they offer better quality coins without a special finish? They could make a run of coins that are handled with a little more care rather than scooping them up with a shovel from a regular run.
Do people who collect new coins for each year have a regular business strike in addition to the satin finish coin, or are they considered interchangeable? >>
Personally, I've updated my Dansco albums the last few years by breaking open a Mint Set. So I guess I don't actually have the business strikes, but I don't really care. At least not at this point in my collecting life. I'm sure there are some people with Registry Sets who care to have both. >>
Precisely my outlook and approach. I keep Dansco albums for Lincoln cents, Jefferson nickels, and Kennedy halves (and, *cough* state quarters), with the latter three albums being built from circulation. I've not had any interest in recent years in searching through rolls for the latest 200X issues (I'd rather focus on older coins I needed for the sets), so I just crack a mint set to keep things up to date. Don't really care about satin vs. BS.
I would not be surprised if his information is correct.
Positive BST Transactions: kalshacon
Box of 20