Home U.S. Coin Forum

WTF PVC!!!!!

How does this happen? I was doing one of my favorite things today, looking at my coinsimage and found a spot on my proof Walker. I fumbled around and located my loupe and investigated further. To my surprise I found some spots which I attribute to an improper rinse. I wasn't happy but it was no big deal. I decided to examine the entire coin and marvel at its beauty when I found a pinhead size spot of green image I looked some more and discovered a couple of other spots developing. I have owned this coin for 5 years and am stunned to see this developing. My questions are as follows: #1 How long does it take for the green death to show up? #2 Since this in a pcgs slab what is their policy in regards to this development. btw it is in a pro66 holderimage Any assistance and advice is appreciated.
"When the people fear their government, there is tyranny; when the government fears the people, there is liberty." Thomas Jefferson

Comments

  • 19Lyds19Lyds Posts: 26,492 ✭✭✭✭
    Send it in for a spot review. If they can save it they will, if not, you'll receive an offer of the downgrade plus cash or simply cash.
    I decided to change calling the bathroom the John and renamed it the Jim. I feel so much better saying I went to the Jim this morning.



    The name is LEE!
  • tahoe98tahoe98 Posts: 11,388 ✭✭✭


    ..........in any event you'll be on the short end due to "pro-rating syndrome"image
    "government is not reason, it is not eloquence-it is a force! like fire, it is a dangerous servant and a fearful master; never for a moment should it be left to irresponsible action." George Washington
  • ronsrons Posts: 338 ✭✭
    Thank you for the directions on who to turn to but still no answer on how long it takes to grow a fine green death. This half has been sitting in an Intercept Shield for almost three years?????? How does that not retard growth?image
    "When the people fear their government, there is tyranny; when the government fears the people, there is liberty." Thomas Jefferson
  • 19Lyds19Lyds Posts: 26,492 ✭✭✭✭
    Hopefully it DID retard the growth as you must remember that PVC is clear and colorless therefore the coin could have been contaminated long before you received it and you would never have known. The green simply shows up as a result of the damage that's occuring!

    Perhaps whoever had it before you bought it, had cleaned it for PVC and just didn't do that good of a job?
    I decided to change calling the bathroom the John and renamed it the Jim. I feel so much better saying I went to the Jim this morning.



    The name is LEE!
  • Sorry to hear that- it must be awful to see on a Proof Walker.
    "College men from LSU- went in dumb, come out dumb too..."
    -Randy Newmanimage
  • BarndogBarndog Posts: 20,515 ✭✭✭✭✭
    I've gotten into the habit of rinsing my circulated half dimes in acetone prior to submission to PCGS. Wouldn't want a tiny spot of PVC evident to graders or a spot to develop after being slabbed.
  • OPAOPA Posts: 17,143 ✭✭✭✭✭


    << <i>I've gotten into the habit of rinsing my circulated half dimes in acetone prior to submission to PCGS. Wouldn't want a tiny spot of PVC evident to graders or a spot to develop after being slabbed. >>



    Question about rinsing in acetone ... I've heard 2 different variations...1) Rinse in acetone & don't do anything else..2) Rinse in acetone & then rinse in distilled water. Which method is recommended? Or are both ok.
    "Bongo drive 1984 Lincoln that looks like old coin dug from ground."
  • BarndogBarndog Posts: 20,515 ✭✭✭✭✭


    << <i>

    << <i>I've gotten into the habit of rinsing my circulated half dimes in acetone prior to submission to PCGS. Wouldn't want a tiny spot of PVC evident to graders or a spot to develop after being slabbed. >>



    Question about rinsing in acetone ... I've heard 2 different variations...1) Rinse in acetone & don't do anything else..2) Rinse in acetone & then rinse in distilled water. Which method is recommended? Or are both ok. >>



    my version is the former. Some do the latter. I don't know either which is preferred.

    edit to add: but then again, I don't submit Proof or modern coins, just old bust stuff, if that makes a difference. I use PLENTY of acetone with multiple rinses for best effect.
  • FairlanemanFairlaneman Posts: 10,426 ✭✭✭✭✭
    First off. Rons thats a heck of a 45S Merc you have for a Icon coin.....image



    << <i>I've gotten into the habit of rinsing my circulated half dimes in acetone prior to submission to PCGS. Wouldn't want a tiny spot of PVC evident to graders or a spot to develop after being slabbed. >>


    I think you have a very smart habit. I do the same thing with every raw coin I buy and with every coin I send to PCGS.

    Ken
  • ronsrons Posts: 338 ✭✭
    An update on the proof Walker. After finding a friend who is a member I sent the Walker in for review. It was returned "conserved" with no offer of payment. There is now a dark spot on the reverse that wasn't present before but no sign of green death on the obverse. image
    "When the people fear their government, there is tyranny; when the government fears the people, there is liberty." Thomas Jefferson
  • DoogyDoogy Posts: 4,508


    << <i>An update on the proof Walker. After finding a friend who is a member I sent the Walker in for review. It was returned "conserved" with no offer of payment. There is now a dark spot on the reverse that wasn't present before but no sign of green death on the obverse. image >>




    par for the course. at least NGC will have NCS contact you before the work is done. PCGS often does the work with no permission asked, and no response. sounds like they killed one problem, but created another.

  • TwoSides2aCoinTwoSides2aCoin Posts: 44,621 ✭✭✭✭✭
    as the coin turns, so does the collectorimage

Leave a Comment

BoldItalicStrikethroughOrdered listUnordered list
Emoji
Image
Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights
Drop image/file