Options
Getting serious about cracking slabs ($99 bandsaw from Home Depot)
planetsteve
Posts: 1,425 ✭✭✭✭
I don't like hammers. I figured that the safety of the bandsaw (for the coin -- who cares about my fingers) was the way to go, and a quick search at Home Depot turned up this beauty.
It seems a good value given the cost of certified coins, does fine for this kind of light work, and looks great in any kitchen.
I did have to move my coffeemaker out of the way, and I wish I had a shopvac instead of just my trusty Electrolux. Nevertheless I'm happy with it.
[
It seems a good value given the cost of certified coins, does fine for this kind of light work, and looks great in any kitchen.
I did have to move my coffeemaker out of the way, and I wish I had a shopvac instead of just my trusty Electrolux. Nevertheless I'm happy with it.
[ 0
Comments
To support LordM's European Trip, click here!
Here is what I use; $80 cheaper and slow- moving parts equals less missing fingers
Check out my current listings: https://ebay.com/sch/khunt/m.html?_ipg=200&_sop=12&_rdc=1
I would take heat over a move like that!
Dave
AJ
PCGS Registries
Box of 20
SeaEagleCoins: 11/14/54-4/5/12. Miss you Larry!
Sorry !
<< <i>Hammers are easy. NGC and ANACS are the easiest.
AJ >>
Seriously, what is the easiest way to break an NGC holder ?
I've been tempting to break a few but I only have a hammer. Should I bang on the NGC holder from the side and take out the plastic piece by piece ?
PCGS slabs just seem to shatter with every hit of the hammer. Eye protection is a must no matter what the tool. I just decided that having sharp plastic shards over the face of the coin looked like a risk.
As for the wife, well, didn't ya guess I'm single? And looking for a place with my own garage?
One more thing -- can I really put metal in the microwave?
sean
-Mark Twain
To support LordM's European Trip, click here!
<< <i>I don't like hammers. I figured that the safety of the bandsaw (for the coin -- who cares about my fingers) was the way to go, and a quick search at Home Depot turned up this beauty.
It seems a good value given the cost of certified coins, does fine for this kind of light work, and looks great in any kitchen.
I did have to move my coffeemaker out of the way, and I wish I had a shopvac instead of just my trusty Electrolux. Nevertheless I'm happy with it.
Coin's for sale/trade.
Tom Pilitowski
US Rare Coin Investments
800-624-1870
Coin's for sale/trade.
Tom Pilitowski
US Rare Coin Investments
800-624-1870
<< <i>So, what was the coin that you cracked out? >>
First one was a Trade Dollar type coin in NGC XF45. The next were 1965-70 Kennedys, all NGC, and the bulk of the box o' 20 or so were late date Mercs, mostly NGC with a few PCGS. (The last one before I finish cleaning up the dust in my kitchen is the ICG 1944-S 10c MS67 I just got from Heritage today.) All of these coins are going into Intercept Shield books for now.
I am keeping my Walkers in their PCGS slabs. I just don't see myself playing in the Registry sandbox anytime soon with the Mercs or Kennedys. If I do get bored with the book presentation, I'll just be sending in a bunch of Economy submissions exclusively to PCGS -- the brand I voted for in the poll thread going tonight.
Knowledge is the enemy of fear
<< <i>I always perfer using a dremmel or die cutter for good results... >>
What type of bit are you using with the Dremel? How long does it take for each slab? (That's another technique I haven't tried.) I appreciate all the responses -- I hope that when a newbie searches the boards for info on how to crack slabs (like I did six months ago), that they find all the options around in one thread.
Here's a warning parable for coin collectors...
ChannelLock makes good ones but I'm sure cheapos will do.
President, Racine Numismatic Society 2013-2014; Variety Resource Dimes; See 6/8/12 CDN for my article on Winged Liberty Dimes; Ebay
No fuss, no muss.
Garrow
<< <i>I'm with you, fcloud. My bandsaw is very convenient for crackouts.
>>
That's not a crackout then, it's a cut out.
My Lord, just crack em with a hammer.
<< <i>
<< <i>I'm with you, fcloud. My bandsaw is very convenient for crackouts.
>>
That's not a crackout then, it's a cut out.
My Lord, just crack em with a hammer. >>
It wasn't all that long ago I read a thread were someone scratched their coin when busting it out of the holder. I prefer not to take the chance of damaging the coin.
President, Racine Numismatic Society 2013-2014; Variety Resource Dimes; See 6/8/12 CDN for my article on Winged Liberty Dimes; Ebay
Good luck !!!
<< <i>to answer for Blinded, I used those when I installed drywall ceilings. We called them nippers. I tied off hat channel with them for the framing
ChannelLock makes good ones but I'm sure cheapos will do. >>
Sorry, caught me working away from the computer. That's what I always knew them as, nippers. These are just industrial sized and case hardened versions.
Check out my current listings: https://ebay.com/sch/khunt/m.html?_ipg=200&_sop=12&_rdc=1