Home› U.S. Coin Forum
Options

Getting serious about cracking slabs ($99 bandsaw from Home Depot)

planetsteveplanetsteve Posts: 1,425 ✭✭✭✭
I don't like hammers. I figured that the safety of the bandsaw (for the coin -- who cares about my fingers) was the way to go, and a quick search at Home Depot turned up this beauty.

It seems a good value given the cost of certified coins, does fine for this kind of light work, and looks great in any kitchen. image

I did have to move my coffeemaker out of the way, and I wish I had a shopvac instead of just my trusty Electrolux. Nevertheless I'm happy with it.

image[

Comments

  • Options
    Is that Duck Tape™? You broke it already?
    image
    To support LordM's European Trip, click here!
  • Options
    planetsteveplanetsteve Posts: 1,425 ✭✭✭✭
    That's duct tape alright. The nozzle of my household vacuum cleaner isn't anywhere near wide enough to push on to the provided dust removal port. Necessity is the mother of all duct taping. image
  • Options
    BlindedByEgoBlindedByEgo Posts: 10,754 ✭✭✭✭✭
    Very nice.

    Here is what I use; $80 cheaper and slow- moving parts equals less missing fingers image


    image
  • Options
    image
  • Options
    MadMartyMadMarty Posts: 16,697 ✭✭✭
    I bet the mircowave makes some interesting toning!
    It is not exactly cheating, I prefer to consider it creative problem solving!!!

  • Options
    Wow, thats bandsaw just seems overkill, lol. Remember to use your guard
    "I'm not the judge of Man, that is God's job, I just make arrangements for them to meet"
  • Options
    planetsteveplanetsteve Posts: 1,425 ✭✭✭✭
    Blinded -- what's the name of that tool? I've seen it recommended here before, but when I read here that PCGS uses bandsaws themselves, I figured I should go for broke.
  • Options
    Get er done


    image
  • Options
    Dave99BDave99B Posts: 8,967 ✭✭✭✭✭
    I bet the little woman loves to see that beast sitting in the kitchen when she comes home.

    I would take heat over a move like that!

    Dave
    Always looking for original, better date VF20-VF35 Barber quarters and halves, and a quality beer.
  • Options
    AnkurJAnkurJ Posts: 11,375 ✭✭✭✭
    Hammers are easy. NGC and ANACS are the easiest.

    AJ
    All coins kept in bank vaults.
    PCGS Registries
    Box of 20
    SeaEagleCoins: 11/14/54-4/5/12. Miss you Larry!
  • Options
    Almost as dangerous as mine !

    image
  • Options

    Sorry !
    image
  • Options
    image
  • Options
    LeeGLeeG Posts: 12,162 ✭
    That's cool but this is alot cheaper and cleanerimage

    image
  • Options
    RarityRarity Posts: 1,466 ✭✭✭✭


    << <i>Hammers are easy. NGC and ANACS are the easiest.

    AJ >>




    Seriously, what is the easiest way to break an NGC holder ?

    I've been tempting to break a few but I only have a hammer. Should I bang on the NGC holder from the side and take out the plastic piece by piece ?
  • Options
    planetsteveplanetsteve Posts: 1,425 ✭✭✭✭
    I agree that the NGC holders are easier than PCGS to crack with a hammer. I learned to tap a NGC slab at each of the four corners with just enough force, then finish busting it open with my fingers.

    PCGS slabs just seem to shatter with every hit of the hammer. Eye protection is a must no matter what the tool. I just decided that having sharp plastic shards over the face of the coin looked like a risk.

    As for the wife, well, didn't ya guess I'm single? And looking for a place with my own garage? image

    One more thing -- can I really put metal in the microwave? image
  • Options
    Blindedbyego, what's that device called? I remember seeing it in another post.

    sean
    Sometimes I sits and thinks, and sometimes I just sits.

    -Mark Twain
  • Options
    So, what was the coin that you cracked out?
    image
    To support LordM's European Trip, click here!
  • Options
    mrearlygoldmrearlygold Posts: 17,862 ✭✭✭


    << <i>I don't like hammers. I figured that the safety of the bandsaw (for the coin -- who cares about my fingers) was the way to go, and a quick search at Home Depot turned up this beauty.

    It seems a good value given the cost of certified coins, does fine for this kind of light work, and looks great in any kitchen. image

    I did have to move my coffeemaker out of the way, and I wish I had a shopvac instead of just my trusty Electrolux. Nevertheless I'm happy with it.

    image[ >>



    imageimage
  • Options
    mrearlygoldmrearlygold Posts: 17,862 ✭✭✭
    Wimps, break em out in your bare hands

    image
  • Options
    robkoolrobkool Posts: 5,934 ✭✭✭✭✭
    I always perfer using a dremmel or die cutter for good results...
  • Options
    planetsteveplanetsteve Posts: 1,425 ✭✭✭✭


    << <i>So, what was the coin that you cracked out? >>



    First one was a Trade Dollar type coin in NGC XF45. The next were 1965-70 Kennedys, all NGC, and the bulk of the box o' 20 or so were late date Mercs, mostly NGC with a few PCGS. (The last one before I finish cleaning up the dust in my kitchen is the ICG 1944-S 10c MS67 I just got from Heritage today.) All of these coins are going into Intercept Shield books for now.

    I am keeping my Walkers in their PCGS slabs. I just don't see myself playing in the Registry sandbox anytime soon with the Mercs or Kennedys. If I do get bored with the book presentation, I'll just be sending in a bunch of Economy submissions exclusively to PCGS -- the brand I voted for in the poll thread going tonight.
  • Options
    RedneckHBRedneckHB Posts: 20,278 ✭✭✭✭✭
    Is that drops of blood on the countertop?
    Excuses are tools of the ignorant

    Knowledge is the enemy of fear

  • Options
    planetsteveplanetsteve Posts: 1,425 ✭✭✭✭


    << <i>I always perfer using a dremmel or die cutter for good results... >>



    What type of bit are you using with the Dremel? How long does it take for each slab? (That's another technique I haven't tried.) I appreciate all the responses -- I hope that when a newbie searches the boards for info on how to crack slabs (like I did six months ago), that they find all the options around in one thread.
  • Options
    looks like a tile nipper. Think nibbling ceramic tile in a shower application.
  • Options
    dpooledpoole Posts: 5,940 ✭✭✭✭✭
    I'm a hammer guy myself. Not as efficient or clean as these other things, but emotionally it's a lot more satisfying. image
  • Options
    NumisOxideNumisOxide Posts: 11,050 ✭✭✭✭✭
    I use a hammer too. Cracked my first ANACS holder yesterday.
  • Options
    ILikeMercsILikeMercs Posts: 1,392 ✭
    to answer for Blinded, I used those when I installed drywall ceilings. We called them nippers. I tied off hat channel with them for the framing
    ChannelLock makes good ones but I'm sure cheapos will do.
    imageDo not taunt Happy Fun Ball image
  • Options
    fcloudfcloud Posts: 12,133 ✭✭✭✭
    I, too, like the band saw. Less chance of scratching a coin. It may be overkill, but I have it for woodworking, so it is just there. I might just as well use it.

    President, Racine Numismatic Society 2013-2014; Variety Resource Dimes; See 6/8/12 CDN for my article on Winged Liberty Dimes; Ebay

  • Options
    I'm with you, fcloud. My bandsaw is very convenient for crackouts.

    No fuss, no muss.

    Garrow
  • Options
    GoldenEyeNumismaticsGoldenEyeNumismatics Posts: 13,187 ✭✭✭
    I use a hammer and screwdriver!
  • Options
    holeinone1972holeinone1972 Posts: 5,368 ✭✭✭


    << <i>I'm with you, fcloud. My bandsaw is very convenient for crackouts.



    >>




    That's not a crackout then, it's a cut out.

    My Lord, just crack em with a hammer.

    image
  • Options
    fcloudfcloud Posts: 12,133 ✭✭✭✭


    << <i>

    << <i>I'm with you, fcloud. My bandsaw is very convenient for crackouts.



    >>




    That's not a crackout then, it's a cut out.

    My Lord, just crack em with a hammer. >>



    It wasn't all that long ago I read a thread were someone scratched their coin when busting it out of the holder. I prefer not to take the chance of damaging the coin.

    President, Racine Numismatic Society 2013-2014; Variety Resource Dimes; See 6/8/12 CDN for my article on Winged Liberty Dimes; Ebay

  • Options
    $99?! That's a great deal!
  • Options
    That tool looks like a Ceramic Tile Nipper .... also available from Home Depot in the tile section......

    Good luck !!!
  • Options
    BlindedByEgoBlindedByEgo Posts: 10,754 ✭✭✭✭✭


    << <i>to answer for Blinded, I used those when I installed drywall ceilings. We called them nippers. I tied off hat channel with them for the framing
    ChannelLock makes good ones but I'm sure cheapos will do. >>



    Sorry, caught me working away from the computer. That's what I always knew them as, nippers. These are just industrial sized and case hardened versions.
  • Options
    pb2ypb2y Posts: 1,461 ✭
    Mamma will run you out of the kitchen with the bald head end of a broom.


    image
    image

Leave a Comment

BoldItalicStrikethroughOrdered listUnordered list
Emoji
Image
Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights
Drop image/file