Home› U.S. Coin Forum
Options

Why the Mint Changed from the Flying Eagle to the Indian Head Cent

As I indicated in my Pattern thread (see below for a link), in 1858 the Mint made a series of patterns to change the design of the Flying Eagle cent to a different design to fix some serious striking problems. Here's the visual reason WHY the Mint was having problems striking the Flying Eagle Cents - Note on the overlay images where the top of the wreaths intersect with the obverse devices - the mint had a very difficult time getting fully struck wreaths and a full struck eagle's heads and tails because so much metal had to flow into the recesses of the dies directly opposite the respective hammer and anvil dies.

They couldn't get enough striking pressure without severly compromising the die life. When they used normal die pressure and normal production runs, there were poorly struck eagle's heads, wings and tails and no definition on the agricultural wreath.

Linkyto 12 Piece Pattern thread

Here's the overlay images that show the problem:

image

image
Collecting eye-appealing Proof and MS Indian Head Cents, 1858 Flying Eagle and IHC patterns and beautiful toned coins.

“It ain't what you don't know that gets you into trouble. It's what you know for sure that just ain't so.” Mark Twain
Newmismatist

Comments

  • Options
    MarkMark Posts: 3,662 ✭✭✭✭✭
    Very nice overlay images; though I knew the mint had issues with striking Flying Eagles, I had never visualized the specific problem. Your overlay makes the problem immediately clear; thanks a lot!

    Plus your set of 1858 patterns is incredibly, truly nice. But, I suspect that you already knew this fact. image
    Mark


  • Options
    sumnomsumnom Posts: 5,963 ✭✭✭
    This is very interesting. Thank you for posting it.
  • Options
    RKKayRKKay Posts: 3,017 ✭✭✭
    Ron: This is a very educational post. It's disappointing so few people acknowledged it. Anyone who studies FE cents should examine these overlays.image
  • Options
    numismanumisma Posts: 3,877 ✭✭✭✭

    I missed this thread or else I would have posted to it. Very education and, as RKKay stated, a real shame that it only received a few posts. Why do lame threads about nothing go into the hundreds of posts, while threads like newmismatist's seem to fade away with little attention?

    Anyway...... here's a pic of an AU that kind of shows what newmismatist is talking about:

    image
  • Options
    Great post on my favorite coin! I know I had to search diligently to find good strikes for my set.
  • Options
    MacCrimmonMacCrimmon Posts: 7,058 ✭✭✭
    TTT for the scholarly presentation. image
  • Options
    NewmismatistNewmismatist Posts: 1,802 ✭✭


    << <i>Anyway...... here's a pic of an AU that kind of shows what newmismatist is talking about:

    image >>



    Thanks Dennis - that's a great example showing where the softly struck portions are - Look at the Eagles Tail, the head and the tip of the right Eagle's wing - all softly struck - on the reverse the the wreath at 2 O'Clock is barely there - if you then compare the overlay pictures you see that those are the places where the obverse and reverse designs intersect.



    << <i>I missed this thread or else I would have posted to it. Very education and, as RKKay stated, a real shame that it only received a few posts. Why do lame threads about nothing go into the hundreds of posts, while threads like newmismatist's seem to fade away with little attention? >>



    Boy was I suprised to see this thread re-appear! The Answer: the same reason why the newsmedia spends so much time talking about Anna Nicole Smith! image
    Collecting eye-appealing Proof and MS Indian Head Cents, 1858 Flying Eagle and IHC patterns and beautiful toned coins.

    “It ain't what you don't know that gets you into trouble. It's what you know for sure that just ain't so.” Mark Twain
    Newmismatist
  • Options
    clw54clw54 Posts: 3,815 ✭✭✭
    Did the 1856s also have the striking problem?
  • Options
    Great post! Thanks for the info.
  • Options
    sumnomsumnom Posts: 5,963 ✭✭✭
    That's an interesting question, Claw. At first I woul have assumed "yes" but given how few were minted, perhaps the problem was not so apparent.
  • Options
    ajiaajia Posts: 5,411 ✭✭✭
    GREAT post.

    We need an 'Educational Forum'
    image
  • Options
    keetskeets Posts: 25,351 ✭✭✭✭✭
    this explanation, plausible and perhaps true, only highlights the stubbornness of the Mint and the pathetic re-use of already tried designs. though the Flying Eagle Cent is a lovely coin and holds a special place in Numismatics and in the hearts of many collectors, the only thing new or original about the coin is the composition of the planchets it was struck on. the obverse is a rehashed Gobrecht Dollar design and the reverse is a copy of a wreath design already used on two issues. why in the world the Mint was stuck on it and refused to try a different design is a question for the ages.......................or simply answered in one (name) word-----Longacre!!!!!

    i have nothing against Classic coinage, but for most of the 19th Century our coinage was dominated by over-used designs, reuse of tried and true designs and the constant rejection of new-school renditions by the old boy network that had control. looking at the Judd book on Patterns one can only wonder why we lost so many beatiful ideas and kept settling for mediocrity. much of what went on easily trumps the games being played in todays world of Mint operation and coinage design.

    great thread, and not because it gave me an outlet to rant. just a great thought provoking thread.
  • Options
    NewmismatistNewmismatist Posts: 1,802 ✭✭


    << <i>Did the 1856s also have the striking problem? >>



    Not nearly as much, though I think a few of the later struck one's show some weakness on the Eagle's tail - That's because they were patterns, and the Mint probably struck them twice, like most proofs, to bring out all the details - the Mint "re-issued" them from 1858-1860 to meet collector demand (S-9 variety) - and even though 1500-2500 more were issued during that period, they were a limited striking and extra care was taken to get them fully struck up - In 1857 & 1858, the coins were struck as production coins on high speed presses (high speed for the time that is) and the die deficiencies became readily apparent.

    Edited to Add: Keets - there was nothing wrong with the design - the Gobrecht Flying Eagle is an outstanding design - it was the marriage of the 2 designs on too small a planchet that caused the problem - I don't know if the reverse had to have a wreath, but they tried a wreath that was very high relief and they put those two designs on a metal that was just to hard to get consistent full strikes w/o cranking up the die pressure (which cracked and wore out the dies very fast). As far as Longacre - he was not a skilled die designer like Gobrecht - so he did the best he could - he copied other's designs image A plagerist for sure!
    Collecting eye-appealing Proof and MS Indian Head Cents, 1858 Flying Eagle and IHC patterns and beautiful toned coins.

    “It ain't what you don't know that gets you into trouble. It's what you know for sure that just ain't so.” Mark Twain
    Newmismatist
  • Options
    clw54clw54 Posts: 3,815 ✭✭✭
    Thanks, Newmismatist. This is interesting information.
  • Options
    pursuitoflibertypursuitofliberty Posts: 7,988 ✭✭✭✭✭
    Wow Ron, what a great post ... glad it didn't disappear! image

    “We are only their care-takers,” he posed, “if we take good care of them, then centuries from now they may still be here … ”

    Todd - BHNC #242
  • Options
    keetskeets Posts: 25,351 ✭✭✭✭✭
    not to be misunderstood, Ron, i don't think there was anything wrong with the designs either, at least not past thew point that they were already on coins that were still currently circulating. why stubbornly use old designs in the first place?? why continue trying after they were proving problematic?? it makes me think of the Ike Dollar reverse being retired on that coin in favor of the smaller SBA with the same reverse-------while that great Liberty Pattern got rejected!!!
  • Options
    BWRCBWRC Posts: 1,448 ✭✭✭


    << <i>Did the 1856s also have the striking problem? >>

    Sometimes, PCGS MS62 S-3 diepair, very informative post Ron!
    image
    Brian Wagner Rare Coins, Specializing in PCGS graded, Shield, Liberty and Buffalo Nickels varieties.
  • Options
    NewmismatistNewmismatist Posts: 1,802 ✭✭
    Keets - there was a big push to get the new small cent in production and becuase Longacre was not the best "artist" when it came to designing coins, he simple put two working die designs together and reduced the size - conceptually it was quite nice - The Gobrecht dollar was not really a circulating coin - I think it was a pattern and if a regular issue, it was very limited in quanty and did not circulate in any significant number (also it had been out of production for over 15 yrs) - My guess is the average person in America in 1856 had never seen a Gobrecht dollar in hand. As for thr $3 gold, though more were minted (started in 1854 w/a mintage of about 160,000 for all 3 mints that it was made at) - it was not a coin that the averge person would have had much familiarity with - in short - although both Obv & Rev were recycled designs - they were not widely seen, so their combination on the new small cent coins was "New" to most Americans who encountered the new small FE cents. It's not as though the used the ubiquitious "seated Liberty" design which was on the dime, quarter, half and dollar - makinfg that the most common circulating design for over 15 years on 4 different denominations - and it's a boring design

    Anyway - the beautiful FE cent was short lived and that's too bad as it is a Great looking coin when fully struck - whcih is why I collected them as Proofs - you get to see what the coin design was SUPPOSED to look like because the proofs ARE fully struck.
    Collecting eye-appealing Proof and MS Indian Head Cents, 1858 Flying Eagle and IHC patterns and beautiful toned coins.

    “It ain't what you don't know that gets you into trouble. It's what you know for sure that just ain't so.” Mark Twain
    Newmismatist
  • Options
    pb2ypb2y Posts: 1,461 ✭
    These slugs were heavy in nickel and very hard. The dies of those times
    would break down quickly. Thus the switch to bronze in 1868. It remained
    the same until 1982.
    image

  • Options
    SwampboySwampboy Posts: 13,277 ✭✭✭✭✭
    ttt


    "Inspiration exists, but it has to find you working" Pablo Picasso

Leave a Comment

BoldItalicStrikethroughOrdered listUnordered list
Emoji
Image
Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights
Drop image/file