Home› U.S. Coin Forum

Washington Dollar

JimDepotJimDepot Posts: 958 ✭✭
in U.S. Coin Forum
The mint has the drawings of the 4 coins.

image


image

image

Jim
image

Comments

  • JimDepotJimDepot Posts: 958 ✭✭
    image

    image

    image


    I sure hope they make a silver set.
    image

  • MisterBungleMisterBungle Posts: 2,308 ✭✭✭

    Is it just me, or does George Washington look
    like he's really ticked off about something??

    ~


    "America suffers today from too much pluribus and not enough unum.".....Arthur Schlesinger Jr.

  • ZoinsZoins Posts: 34,401 ✭✭✭✭✭
    I wonder if the US Mint is going to be using more edge letters and if this will cause the TPGs to modify to holders offering clear visibility of edge lettering.
    Private Mint News | 2010 Lincoln Reverse Finalists
  • HarpuaHarpua Posts: 71 ✭✭
    Just curious, any other cases in US history that date and mint are on the edge?
  • PerryHallPerryHall Posts: 46,856 ✭✭✭✭✭
    I don't mind the mottos being on the edge since it reduces the clutter on the face of the coin but I do NOT like the date and mintmark being on the edge.

    Worry is the interest you pay on a debt you may not owe.
    "Paper money eventually returns to its intrinsic value---zero."----Voltaire
    "Everything you say should be true, but not everything true should be said."----Voltaire

  • BurksBurks Posts: 1,103 ✭


    << <i>I don't mind the mottos being on the edge since it reduces the clutter on the face of the coin but I do NOT like the date and mintmark being on the edge. >>



    Same here. It's a pretty dumb idea. They could have placed even the mintmark in various locations without messing up the design.

    If I was Washington and one that coin, I'd be mad too!
    WTB: Eric Plunk cards, jersey (signed or unsigned), and autographs. Basically anything related to him

    Positive BST: WhiteThunder (x2), Ajaan, onefasttalon, mirabela, Wizard1, cucamongacoin, mccardguy1


    Negative BST: NONE!
  • Conder101Conder101 Posts: 10,536 ✭
    I saw them a little bit ago in the local newspaper. The AP article quoted someone from the mint describing the designs as being absolutely beautiful. Absolutely beautiful? "Oh look! a head with letters around it, shear genius!" Ok I will admit that the busts are rendered nicely, but that isn't too difficult to do. Thereal test though will be how well they can translate the drawings to a three dimentional low relief image.
  • seanthorntonseanthornton Posts: 64
    A bi-metal coin sure would have been nice for this series. It would have set it apart from the other failures. The only way to get Americans to use a dollar coin is to do away with the paper dollar.
    Sean
    "You can't accumulate unless you speculate"
  • StrikeOutXXXStrikeOutXXX Posts: 3,352 ✭✭✭✭✭
    Cool - I hadn't seen 1-4 yet. Here are 5-8 if you missed it in the other thread.

    image
    image
    image
    image
    ------------------------------------------------------------

    "You Suck Award" - February, 2015

    Discoverer of 1919 Mercury Dime DDO - FS-101
  • jmj3esqjmj3esq Posts: 5,421 ✭
    They all look nice. It sure looks like their is a lot of erea on the coins that will take a lot of hits. I bet high end mark free MS coins will be hard to come by.
  • MarineEAS1999MarineEAS1999 Posts: 327


    << <i>I don't mind the mottos being on the edge since it reduces the clutter on the face of the coin but I do NOT like the date and mintmark being on the edge. >>



    image It makes little sense to do this as it would be difficult to identify the mint mark in any current holder.
    Ken

    My first post...updated with pics

    I collect mostly moderns and I'm currently working on a US type set.

    image
  • GemineyeGemineye Posts: 5,374 ✭
    They look OK..I sure hope the public accepts them.The only way to get them going is to get rid of the $1 note and replace it with the $2 note.
    ......Larry........image
  • keetskeets Posts: 25,351 ✭✭✭✭✭
    I wonder if the US Mint is going to be using more edge letters and if this will cause the TPGs to modify to holders offering clear visibility of edge lettering.

    a PCGS holder will generally allow some of the edge to be seen if you use good lighting and angle the holder enough. there was a service a few years ago that offered a holder with the coin sittin out towards the back to view the edge but i haven't seen any. it's really a niche type of request that i doubt anyone will pick up on.
  • 291fifth291fifth Posts: 24,698 ✭✭✭✭✭
    The near head-on views of the presidents will probably translate poorly to the actual coins if the current very low relief is used. Look at the 2006 Jefferson nickel obverse for a possible preview of what they will look like.
    All glory is fleeting.
  • TheRavenTheRaven Posts: 4,148 ✭✭✭✭
    blah.....

    As long as they are making them on the material the sac dollars are made on they will look terrible.....

    This birdbrain idea is going to fill up the vaults faster then Morgan Dollars did.....

    Except 100 years after production nobody will want these coins.....
    Collection under construction: VG Barber Quarters & Halves
  • garsmithgarsmith Posts: 5,894 ✭✭
    Looks like the TPG's are going to have to develop a slab that allows the coin edge to be viewed

    image

  • flaminioflaminio Posts: 5,664 ✭✭✭
    I can deal with putting EPU and IGWT on the edge. However, I am appalled that the word Liberty is removed. I do understand that the depiction of the SOL is supposed to be a sufficient representation -- yet when they made SOL commems back in 1986, the word Liberty was included, as it is on the current Platinum coins.

    Having the date and MM on the edge is atrocious as well.

    They look like the "coins" I used to get from the gas station when I was a kid.
  • WeissWeiss Posts: 9,942 ✭✭✭✭✭
    My thoughts:

    They're big. They're clean. They look very Euro (and €).

    They look like slot machine tokens.

    They don't look American.

    It's all academic, because they won't work while paper $ are still circulating.
    We are like children who look at print and see a serpent in the last letter but one, and a sword in the last.
    --Severian the Lame
  • LeianaLeiana Posts: 4,349 ✭
    These coins are not going to have the relief that gives them the depth we see in these concepts, methinks. image

    I wish they said LIBERTY somewhere. That's what these men fought for! It is WRONG!! We exclude LIBERTY yet maintain a LATIN motto and a phrase that was added to the coins in the 1860's, long after the founding fathers.

    -Amanda
    image

    I'm a YN working on a type set!

    My Buffalo Nickel Website Home of the Quirky Buffaloes Collection!

    Proud member of the CUFYNA
  • garsmithgarsmith Posts: 5,894 ✭✭
    Look at the obverse and reverse of the Washington; now look at the edge view; now look at the obverse and reverse again. What happened to the raised edge rim that appears on the edge view but not on the obverse and reverse viewimage
  • DrWhoDrWho Posts: 562 ✭✭
    you know TheDoc is one very enthusiastic coin collector. i'd go hog-wild with this series if it wasn't for:

    THE COMPOSITION OF THE COIN, THE METAL, is JUNK KRAPP. looks like &$#^W%, tones fast 'n ugly.
  • ConnecticoinConnecticoin Posts: 13,109 ✭✭✭✭✭
    Yeah, we will see if they look like the drawings, or if they end up looking like the low-relief "drag queen" 2006 Jeff nickels.
    *For Sale on Numismy* *For Sale on Ebay*
  • robertprrobertpr Posts: 6,862 ✭✭✭
    image

    That's going to be about the same amount of relief on the actual coins as well.
  • topstuftopstuf Posts: 14,803 ✭✭✭✭✭
    They should be hobo nickel engravers' delights.
  • ArtistArtist Posts: 2,013 ✭✭✭


    << <i>Is it just me, or does George Washington look
    like he's really ticked off about something?? >>



    He's thinking "Putting politicians like myself is akin to monarchies putting kings and queens on coins, and that is decidedly not what America is about - not only has my legacy been disrespected already by having my image placed on the quarter AND the dollar bill, but now it is stuck on this slug as well."

    *

    And you are correct Amanda - omitting the word 'Liberty' adds further insult to injury.
    image
    >>>My Collection
  • 291fifth291fifth Posts: 24,698 ✭✭✭✭✭


    << <i>Is it just me, or does George Washington look
    like he's really ticked off about something??

    ~ >>



    Washington had false teeth and was self-conscious about how they looked. He was known as a man of few words for much the same reason.
    All glory is fleeting.
  • wayneherndonwayneherndon Posts: 2,357 ✭✭✭
    The reverse is nice.

    WH
    We are: WHRC Wizard PotoPromo
  • lkrarecoinslkrarecoins Posts: 2,137 ✭✭✭
    i think the mint is running out of ideas....but then again, im not a big modern sorta guy image
    In Loving Memory of my Dad......My best friend, My inspiration, and My Coin Collecting Partner

    "La Vostra Nonna Ha Faccia Del Fungo"
  • cladkingcladking Posts: 28,733 ✭✭✭✭✭


    << <i>A bi-metal coin sure would have been nice for this series. It would have set it apart from the other failures. The only way to get Americans to use a dollar coin is to do away with the paper dollar.
    Sean >>




    On the plus side this might get the dead presidents out of Congress's and the mint's systems. image
    tempus fugit extra philosophiam.
  • TheRavenTheRaven Posts: 4,148 ✭✭✭✭
    We can only hope that it will do that, but I doubt that it will.....

    We need a 21st Teddy Roosevelt to come in a correct our coins..... (Althought I love Barber coins)
    Collection under construction: VG Barber Quarters & Halves
  • aus3000tinaus3000tin Posts: 369 ✭✭✭
    I personally don't the public will accept the coins without doing away with the dollar bill.
    The coin collecting society will not accept the coins for various reasons (ie, coin composition).

    I don't like the coins because they aren't worth collecting.
    First, the drawings appear with toning in the countenance. Will that transfer over to the actual coin design? How will it appear?
    Second, the US Mint will flood the market with more "collectible" coins. However, with the State Quarter program still active, it will inundate the average collector with too many "collectible" coins.
    Third, the coin composition.
    Finally, the introduction of the coin dollar will fall to the waste side much like the other coin dollars produced in the past.

    Just my thoughts.

    Thanks,

    Chris
  • RichieURichRichieURich Posts: 8,553 ✭✭✭✭✭


    << <i>On the plus side this might get the dead presidents out of Congress's and the mint's systems. image >>



    And then they come up with the First Ladies series. What is next, heads of Congress? Note: If Pro is the opposite of Con, the Progress is the opposite of Congress!

    An authorized PCGS dealer, and a contributor to the Red Book.

  • ZoinsZoins Posts: 34,401 ✭✭✭✭✭


    << <i>

    << <i>I don't mind the mottos being on the edge since it reduces the clutter on the face of the coin but I do NOT like the date and mintmark being on the edge. >>



    image It makes little sense to do this as it would be difficult to identify the mint mark in any current holder. >>

    This isn't true as edge lettering is prefectly legible in the Air-Tites-like holders the US Mint currently uses. Somehow I don't think the US Mint takes TPG holders into consideration when making their designs. I'm not sure how the US Mint feels about TPGs in general but I don't think they're happy about First Strike. Anyway, many countries in the world use edge lettering today, the US is just playing catch up (yes I know they did a few a while back). Holders should be designed to the coin, not the other way around.

    Private Mint News | 2010 Lincoln Reverse Finalists
  • MikeInFLMikeInFL Posts: 10,188 ✭✭✭✭
    Did anybody else notice the resemblance?

    image

    image
    Collector of Large Cents, US Type, and modern pocket change.
  • coinnut86coinnut86 Posts: 1,592 ✭✭✭


    << <i>Did anybody else notice the resemblance?

    image

    image >>



    image

    I was going to say I liked that one the best!

    I agree with Amanda about the Liberty, and Artist, your words are also just.
    It's a shame about the relief, as I fear Robert is going to be correct. image
    image

Leave a Comment

BoldItalicStrikethroughOrdered listUnordered list
Format
SpoilerCodeQuote
Heading 2Heading 1
Emoji
:):D:(;):/:o:s:p:'(:|B):#:*<3o:)>:)
Url
Image
Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights
Drop image/file
Home • U.S. Coin ForumComment As ...