Win a Body Bagged Coin that is in Plastic.
Fairlaneman
Posts: 10,428 ✭✭✭✭✭
Just tell me what you think is GOOD or BAD about conservation of coins. Basically I am talking about classic coins. The best answer pro or con, in my opinion, will win.
The winner will get a coin that is in NCS plastic and was not conserved because it had another problem so they bagged it. The coin was saved !!!!
This will end Sunday night at 6 PM Pacific Standard Time.
Ken
The winner will get a coin that is in NCS plastic and was not conserved because it had another problem so they bagged it. The coin was saved !!!!
This will end Sunday night at 6 PM Pacific Standard Time.
Ken
0
Comments
Ken, there is no universally right answer but rather each circumstance requires a for or against decision.
For example, you have a beautiful proof coin that developed PVC and other bad surface contaminents as a result of improper storage, contaminents in the case, etc. This type of coin is a good candidate for conservation because with very little effort the coin can be brought back to life and salvaged. It would be wrong to let the coin go bad for no reason because there are non caustic techniques available today that can save the coin and let its owner enjoy its original beauty.
On the other hand, there are some "dirty" Gems out there that get no pricing respect because a large segment of the collecting public prefers white coins. Who are we -- the colorful people -- to tell them that they're wrong and we're right? Maybe we're wrong and they're right? It's all relative. An owner of a "dirty" Gem might choose to "enhance" the appeal of a coin to bring a stronger selling price. Although to each his own, I view this as altering a coin. It's not fair to the "true" well preserved on their own Gems that a "dirty" Gem can take a bath and suddenly be in their league.
So here's my position: I think intentionally altering the appearence of a non problem coin in an effort to get a higher grade, or to artificially make a coin look like it was just minted should not be allowed. Taking coins that have environmental challenges and saving those coins from certain doom by applying modern non-caustic techniques should be allowed, and I for one have done it myself. Taking PVC off of an otherwise nice coin was a pleasure because I saved the coin from certain doom.
Best, Mike.
As an aside, I believe every single dealer who uses PVC, even for a "short" time, should be strung up by his balls.
"Ask, and it shall be given you; seek, and ye shall find; knock, and it shall be opened unto you." -Luke 11:9
"Hear, O Israel: The LORD our God is one LORD: And thou shalt love the LORD thy God with all thine heart, and with all thy soul, and with all thy might." -Deut. 6:4-5
"For the LORD is our judge, the LORD is our lawgiver, the LORD is our king; He will save us." -Isaiah 33:22
Two words: preserving history.
I am a collector
And things, well things
They tend to accumulate
1) Keep bad material from harming the coin and its surfaces (pvc, etc)
2) Allow people to view the coin as it was made (ie...too much dirt/grime/etc)
3) I like nice toning but if it were pitch black and ugly, I wouldn't like it....so, conservation can keep people interested in coins and not discourage them
Those are my main reason with #1 being the leader and main reason by far.
I've been told I tolerate fools poorly...that may explain things if I have a problem with you. Current ebay items - Nothing at the moment
The Bad - Allows dealers to sell "conserved" garbage to unsuspecting public.
They call me "Pack the Ripper"
Russ, NCNE
Most of the coins that are sent in for conservation are problem coins and unattractive coins, in many case terribly unattractive pieces. Some are coins that have suffered PCV damage which are restored and protected from future damage.
They conserve art, books, and antiques in some cases so why not recover and protect classic coins, at least those with problems. I think many of us fear that attractively toned specimens will be dipped and otherwise made "blast white", but with the popularity of such toned coins growing and the cost associated with conservation process, I think (or at least HOPE) these old coins will be safe and perhaps with our improved storage methods, more likely to be preserved the way time and nature has left them.
There is potentially a "Bad" side as well. In the relative short term, 20 to 30 years, it would seem most coins that have been dipped properly have not changed over time. We assume that this NCS process will preserve and protect the coins for ions but there is a haunting doubt in many of our minds that these "treated coins" will somehow become ugly (again) or worse case, suffer some long term damage.
Either way, I hope that coins that are conserved will be only those that desperately need it, leaving the origin coins alone.
I'm usually an optimist, so I assume things will work out fine in the long run.
Best wishes, Pete
Louis Armstrong
As far as conservation goes, here is my arguement. For me, the primary goal for numismatists is to preserve coins for the future and for future collectors. True conservation work can repair a coin's surface and serve a very important restorative function that helps the future of numismatics....
Also, it can, in some cases, arrest further degradation.
Once you accept the fact that conserved coins are NOT cleaned coins, there is nothing bad about conservation. Simply, conservation is the act of protecting an item from injury. Thus removing contaminants as part of the conservation process ensures that the coin will not degrade further. If you think of yourself as the temporary custodian of a rare coin, then conservation should be considered a requirement.
However I prefer any coin that is not conserved and then slabbed, that way you can feel the history, and imagine the life the coin had lived .... after all it has lived thru what we only can dream!
Hell, I don't need to exercise.....I get enough just pushing my luck.
Jeremy
To me;
Removing PVC, tape residue, corrosion, heavy carbon or potentially damaging debris and it's residue = generally good (and rightly called conservation)
Removing normal toning, removing evidence of (mis)handling and possible circulation, most "repairs" and almost all surface alterations = generally bad (and should not be considered conservation)
my 2 bits anyway
“We are only their care-takers,” he posed, “if we take good care of them, then centuries from now they may still be here … ”
Todd - BHNC #242
Conservation becomes bad when it is used to "repair" coins(ie.......close up holes, gouges etc) Holes and normal wear and tear marks give classic coins character and hold untold volumes of history.
Conserving coins gives the coin a second life.
It depends, If in vaccuum it is safe against all forces, air, bacteria and hmidity, water.
It gives a damaged coin a safer life.
That is my explanation
Thanks!
Proud member of the CUFYNA
Need a Banner Made? PM ME!
The same is true of archaelogical finds. Modern archaeolgists have much better techniques of conservation today than what existed when the science of archaelogy was in its infancy. Many artifacts exhibit damage that was unnecessary in the name of conservation and preservation.
On the other hand, if people want to get more enjoyment (or profit) out of their coins in the near term, they may choose to try an improve the appearance of a coin that has been lightly damaged due to storage conditions or impurities present on the surface of the coins (from either before or after the minting process). If they choose to do so, they should keep in mind that in the long term future the coins they are conserving may end up worse than if they left them alone and, at the very least, should do enough research to allow them to use the least destructive means possible. They should also keep in mind that if they strip the oxidation layer skin off the coin, that the underlying metal will be in a more reactive state and that the metal will practically "seek out" something to chemically combine with to form a more stable "skin" on its surface. In other words, storage conditions are even more important for a conserved coin than for one with a skin or patina on it.
Or something like that...
These surreptitious minters produced struck halfpence as light in weight as possible. A regal British halfpence weighed about 150-155 grains, but the imitations averaged only about 110-115 grains, or some 40 grains underweight, thus more coins could be produced per pound of copper. This yielded a substantial profit, as the copper in a full weight regal halfpenny was worth only about half of the face value of the coin. Of course, unlike the legal state authorized mints, these individuals did not pay any royalties to the government.
In order to make the coins easier to put into circulation the minters purposefully cut shallow dies so the newly minted coins would lack sharp details and would thus appear worn. They also back dated there products using dates that included: 1747, 1771, 1772 and 1774-1778 as well as using the contemporary (or recent back dates) of 1787 and 1788. Interestingly, legitimate regal halfpence were not minted every year during this period; in fact no legitimate halfpence were produced during 1776-1778 or in 1787 or 1788. It seems the minters did not even try to keep their backdating accurate! Apparently this oversight was either not recognized by the general public or was intentionally overlooked as long as individuals felt the coins would be generally accepted.
Halfpence produced in sand molds as opposed to those struck from dies on a press were made of copper alloyed with less expensive metals such as lead or pewter. Depending on the alloy used these coins might weigh more than the struck imitation halfpence but their intrinsic value was usually even lower. Sand cast coppers had a grainy, worn appearance with indistinct lettering. They were also slightly smaller in size and often somewhat irregular in shape. For details on the production of sand mold halfpence see the introduction to British counterfeit halfpence.
The attribution of imitation British halfpence to an American mint is a difficult problem that has recently received much attention in numismatic literature. What complicates the situation is that at the same time these lightweight imitation coppers were being produced locally, a significant number of lightweight counterfeit halfpence were being imported into the U.S. from England and Ireland. Many numismatists have tended to associate the more crude coppers with American mints while the better quality counterfeits were associated with British mints. Byron Weston has questioned this tendency and has suggested using the term "anonymous" counterfeit for any non regal halfpenny that cannot be attributed to a specific mint.
Clearly, both imported and locally produced counterfeits circulated side by side in America and both are important to the history of what has been called "North American coppers." Imitation halfpence associated with an American origin are discussed in the following sections, all others are included under British coinage in a section on counterfeit copper.
British halfpence now considered to be of American origin those that have been associated with New York City, those assigned to Machin's Mills and , a final group of unattributed imitation halfpence considered to have been produced in America.
I did not write this artical, I think it is related to some of the same problems of today in modern History. Coins will have a special place in the heart of collectors of today and, in the future..
Conservation Is good because, History is an important part of our
heritage. We should all learn from example , but we choose to learn from mistakes. Yet we keep making the same mistakes over and, over till we learn... If i only had my baseball card collection and my Babe Ruth rookie cards !
Apropos of the coin posse/aka caca: "The longer he spoke of his honor, the tighter I held to my purse."
TorinoCobra71
<< <i>For long term thinking regarding the preservation of coins (so future generations can see them in as good a state as possible), cleaning or conserving should be done only with the intent of stopping or slowing down an active corrosive agent. If something isn't actively eating the coin, it should be put into an inert holder and stored in an airtight container (without any paper or wood or other sources of corrosion present) with dessicant present to maintain low humidity and not be exposed to temperature fluctuations. The reason that coins with an unattractive deposition of a foreign substance on their surface shouldn't be messed with is because future generations may invent safer more effective means of conservation than exist today.
The same is true of archaelogical finds. Modern archaeolgists have much better techniques of conservation today than what existed when the science of archaelogy was in its infancy. Many artifacts exhibit damage that was unnecessary in the name of conservation and preservation.
On the other hand, if people want to get more enjoyment (or profit) out of their coins in the near term, they may choose to try an improve the appearance of a coin that has been lightly damaged due to storage conditions or impurities present on the surface of the coins (from either before or after the minting process). If they choose to do so, they should keep in mind that in the long term future the coins they are conserving may end up worse than if they left them alone and, at the very least, should do enough research to allow them to use the least destructive means possible. They should also keep in mind that if they strip the oxidation layer skin off the coin, that the underlying metal will be in a more reactive state and that the metal will practically "seek out" something to chemically combine with to form a more stable "skin" on its surface. In other words, storage conditions are even more important for a conserved coin than for one with a skin or patina on it.
Or something like that... >>
Over all this is the answer I like the best.
Many good answers were extended and hopefully the view points were read by other members of the forum so that they may ponder the pro's and con's of conserving a coin.
Mr Spud I will PM you for your address.
Thanks to all for joining in.
Ken
I never win
<< <i>I never win
Oh Yes you do. You have made some very nice coins, slab wise, because of your keen eye.
Like I said there were some very good answers and yours was one of them....
Ken
<< <i>
<< <i>I never win
Oh Yes you do. You have made some very nice coins, slab wise, because of your keen eye.
Like I said there were some very good answers and yours was one of them....
Ken >>
OK, I feel better now
Quit rewriting my answers Spud!!!
I received the bodybagged coin yesterday. Thank you very much. It is a 1935 Mercury Dime w/Unc Details Reverse Improperly Cleaned. The coin has lots of die polish making it very hard to see what they are talking about. I think they mean some hairlines in the bottom right quadrant of the reverse that look at first like more die polish, but if you look at the cartwheel that section has a disruption in the lucter. I might try and take a picture.
Actually this coin is better looking than some of the conserved pieces I got stuck with.
Ken
I do not think this coin was conserved. As white as it is why would it be there in the first place. It is a prime example of conservation Mis-Use in my very humble opinion.
I used the NCS Service one time when it first came out. The result was horrid and the service will not be used by myself again.
Ken