Home› U.S. Coin Forum
Options

Large Cent "toughie" # 2

Why are Classic Head cents (1808 - 1814) typically seen low grade and porous?

Comments

  • Options
    RussRuss Posts: 48,514 ✭✭✭
    Because most of the surviving population is comprised of ship wreck recovery.

    Note: I actually have no idea, but thought that sounded good. image

    Russ, NCNE
  • Options
    BillJonesBillJones Posts: 36,023 ✭✭✭✭✭
    The Red Book circulated the story that those coins were produced on "soft copper," but I've read that tests on the coins revealed no difference in the copper between the Draped Busts and Classic coins. The best explaination that I have read is that the total mintages were much lower. Given the usually attrition for early U.S. coins, that meant that there were fewer high grade survivors on a proportionate basis.
    Retired dealer and avid collector of U.S. type coins, 19th century presidential campaign medalets and selected medals. In recent years I have been working on a set of British coins - at least one coin from each king or queen who issued pieces that are collectible. I am also collecting at least one coin for each Roman emperor from Julius Caesar to ... ?
  • Options
    RittenhouseRittenhouse Posts: 678 ✭✭✭✭
    russ, you get B- for being inventive.

    bill, you're getting warm. You are correct that hardness tests show no diff between early dates, Classic Heads, and Matrons. Makes sense, planchets came from same source.

    Hint: Try the Congressional records at loc.gov.
  • Options
    BillJonesBillJones Posts: 36,023 ✭✭✭✭✭
    Crummy copper was a good explaination for the 1811 half cents. That year they used all of the junky planchets they had on hand and then did not make any more half cents until 1825. The mint director at the time (1811) thought that half cents were a waste of the mint's time, and he ended the production of them.

    Ditto of the 1802 half cents. They are made on cut down large cent plancets that were too cruddy to use for the large cents, which left most 1802 half cent cruddy.

    Large cents were by in large made on better copper.
    Retired dealer and avid collector of U.S. type coins, 19th century presidential campaign medalets and selected medals. In recent years I have been working on a set of British coins - at least one coin from each king or queen who issued pieces that are collectible. I am also collecting at least one coin for each Roman emperor from Julius Caesar to ... ?
  • Options
    RittenhouseRittenhouse Posts: 678 ✭✭✭✭
    Bill, you were doing so well before you repeated the old myth about the 02s and 11s. The fact is that many half cents from 1793 - 1811 were struck on "spoiled cents". This was both due to the lack of copper and an misguided attempt to economize. "Spoiled cents" did not mean corroded, it meant mis-struck. Off-center, double-struck, clips, etc. were rolled down and punched out as HC planchets. Same copper as the cents, just as good, no diff. 02s and 11s come crappy because few were made, few collected, most survivors end up being worn & porous. Copper does that.
  • Options
    mdwoodsmdwoods Posts: 5,560 ✭✭✭
    I was under the impression that we were having trouble getting quality planchets from Great Britain because of the political troubles which eventually led to the War of 1812.
    National Register Of Big Trees

    We'll use our hands and hearts and if we must we'll use our heads.
  • Options
    RittenhouseRittenhouse Posts: 678 ✭✭✭✭
    mdwoods is getting closer.....
  • Options
    BaleyBaley Posts: 22,663 ✭✭✭✭✭
    Boulton & Watt? Varying quality of copper? "black copper"? Embargo?

    These coins are so difficult to find nice, my example of the type is this piece, a former NTC AU50 coin image Now housed in the type set and thought of as a more reasonable VF/scudzy due to moderate porosity:

    image

    Was there a coin shortage going on? did most of the mint's issue go into employees pay envelopes as back salary (at the direction of mint director Patterson, overriding Treasury policy of refusing to issue warrants to pay mint workers) and thence immediately into circulation? Were most or all of these coins made from "remaining copper blanks" which had previously been stored, maybe not in the most "preservationary" environment?

    Liberty: Parent of Science & Industry

  • Options
    RittenhouseRittenhouse Posts: 678 ✭✭✭✭
    The reason Classic Heads come scummy is that most of them were melted for their copper. What was left was the odd piece or two that was saved or stragglers still in circulation.

    Historical records show that during the War of 1812 the price of copper soared from 20 cents to 80 cents per pound. At 80 cents per pound, a cent was worth nearly twice face value as metal. As the price of copper soared, manufacturers and traders grabbed up any copper they could find, including cents and half cents.

    This lead the Treasurer of the US, Thomas Tucker, to recommend the MInt cease distributing copper coin on Nov. 13, 1814. However, it was already too late and the Mint didn't listen anyway.

    In 1816, Congressman Elias Root raised a bit of a stink about this (see Annals of Congress, 14th Congress, 1st Session, pp. 694 - 695) but by then the price had dropped and no one paid heed.

    In all, an my best guess is that 7 - 8 million cents and perhaps 1- 2 million HCs disappeared into the melting pot.

    But then this was only one of the melts of copper coin. During what I've called "The Great Mint Melt" from 1857 - 1880, the Mint records detail the melting over 38 million LCs and 1 - 2 million HCs were melted by the Mint for use as copper in new cents or as alloy of silver and gold.

    In sum, we're lucky there's any early copper left at all.

  • Options
    Rittenhouse,
    Good thread,keep them coming.
    Thanks,
    Steve

Leave a Comment

BoldItalicStrikethroughOrdered listUnordered list
Emoji
Image
Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights
Drop image/file