Home› U.S. Coin Forum
Options

Half Cents used as washers?

ajaanajaan Posts: 18,097 ✭✭✭✭✭

At the local club coin show today I was talking to a dealer about Half Cents. He said at one time farmers, perhaps others, used half cents as washers when roofing because they were cheaper then the washers. Anyone ever hear of this? I can just imagine thousands of nailed half cents on old barns' roofs.


DPOTD-3
'Emancipate yourselves from mental slavery'

CU #3245 B.N.A. #428


Don

Comments

  • Options
    johnny9434johnny9434 Posts: 35,077 ✭✭✭✭✭

    I wouldn't doubt it. Times were different and you had to improvise best you could, thats just a start....

  • Options
    Walkerguy21DWalkerguy21D Posts: 12,218 ✭✭✭✭✭

    I’m a little skeptical.
    Certainly, like large cents, I’m sure some were retooled into something needed, but hundreds if not thousands being used as roof washers? Nah….

    Successful BST transactions with 180 members. Gothat3rs, Omegaraptor, breakdown, scotty1419, Cent1225, mattniss, bigjpst, onlyroosies, Manorcourtman, guitarwes, Ebeneezer, Tonedeaf, Shane6596, Piano1, Ikenefic, RG, PCGSPhoto, stman, Don'tTelltheWife, Boosibri, Ron1968, snowequities, VTchaser, jrt103, SurfinxHI, 78saen, bp777, FHC, RYK, JTHawaii, Opportunity, Kliao, bigtime36, skanderbeg, split37, thebigeng, acloco, Toninginthblood, OKCC, braddick, Coinflip, robcool, fastfreddie, tightbudget, DBSTrader2, nickelsciolist, relaxn, Eagle eye, soldi, silverman68, ElKevvo, sawyerjosh, Schmitz7, talkingwalnut2, konsole, sharkman987, sniocsu, comma, jesbroken, David1234, biosolar, Sullykerry, Moldnut, erwindoc, MichaelDixon, GotTheBug
  • Options
    lkeneficlkenefic Posts: 9,605 ✭✭✭✭✭

    I've seen anecdotal evidence of half cents and large cents being used as spacers or washers in construction (barns) but I don't believe there's evidence of this as a widespread practice...

    Collecting: Dansco 7070; Middle Date Large Cents (VF-AU); Box of 20;

    Successful BST transactions with: SilverEagles92; Ahrensdad; Smitty; GregHansen; Lablade; Mercury10c; copperflopper; whatsup; KISHU1; scrapman1077, crispy, canadanz, smallchange, robkool, Mission16, ranshdow, ibzman350, Fallguy, Collectorcoins, SurfinxHI, jwitten, Walkerguy21D, dsessom.
  • Options
    SmudgeSmudge Posts: 10,024 ✭✭✭✭✭

    I have an 1850 large cent that was given to me by my LCS . It has two holes drilled in it as though it had been used as a button. Who knows what old coins were used for.

  • Options
    HoledandCreativeHoledandCreative Posts: 2,911 ✭✭✭✭✭

    This is the only one I have with a center hole. May have been used as a washer. Wish money could talk.

  • Options
    Walkerguy21DWalkerguy21D Posts: 12,218 ✭✭✭✭✭

    @HoledandCreative said:
    This is the only one I have with a center hole. May have been used as a washer. Wish money could talk.

    Yes, it certainly may have been, but unlikely with a construction nail. Round nails didn’t become common until ~1890’s, replacing the square cut nails.

    Successful BST transactions with 180 members. Gothat3rs, Omegaraptor, breakdown, scotty1419, Cent1225, mattniss, bigjpst, onlyroosies, Manorcourtman, guitarwes, Ebeneezer, Tonedeaf, Shane6596, Piano1, Ikenefic, RG, PCGSPhoto, stman, Don'tTelltheWife, Boosibri, Ron1968, snowequities, VTchaser, jrt103, SurfinxHI, 78saen, bp777, FHC, RYK, JTHawaii, Opportunity, Kliao, bigtime36, skanderbeg, split37, thebigeng, acloco, Toninginthblood, OKCC, braddick, Coinflip, robcool, fastfreddie, tightbudget, DBSTrader2, nickelsciolist, relaxn, Eagle eye, soldi, silverman68, ElKevvo, sawyerjosh, Schmitz7, talkingwalnut2, konsole, sharkman987, sniocsu, comma, jesbroken, David1234, biosolar, Sullykerry, Moldnut, erwindoc, MichaelDixon, GotTheBug
  • Options
    VeepVeep Posts: 1,524 ✭✭✭✭

    A little off-topic: I used to sell powder actuated tools that would shoot a nail through a 2x4 into concrete. Sometimes, they’d shoot into concrete block which is softer and the powder charge would be too strong. Carpenters would shoot through a penny or nickel if need be to slow down the nail. Clearly, this is not relevant to half cent days, but I wanted to share a more modern alternate use for coins.

    "Let me tell ya Bud, you can buy junk anytime!"
  • Options
    CaptHenwayCaptHenway Posts: 34,351 ✭✭✭✭✭

    I have never seen a half cent with a central hole other than the one shown in this thread. I think that if this were a common practice there would be more of them around.

    That doesn't mean that a few might not have been used here and there when some carpenters ran out of regular washers and they used a convenient substitute.

    Professional Numismatist, Retired. 55 year member ANA. Former ANA Senior Authenticator. Winner of four ANA Heath Literary Awards; three Wayte and Olga Raymond Literary Awards; Numismatist of the Year Award 2009, and ANA Lifetime Achievement Award 2020. Winner of the PNG's 2026 Robert Friedberg Award for "The Enigmatic Lincoln Cents of 1922," Available now from Whitman or Amazon.
  • Options
    MasonGMasonG Posts: 7,794 ✭✭✭✭✭

    Using a couple of inflation calculators, I get an amount between 20 and 25 cents in today's dollars for the purchasing power of a half cent in 1850. The cost today for a half cent sized washer is around 7 to 10 cents. I don't know how washers were priced in 1850, but today, it would not make financial sense to use quarters as washers.

  • Options
    JBKJBK Posts: 17,974 ✭✭✭✭✭
    edited November 18, 2026 1:40AM

    Back in the days of sailing ships coins were often placed under the mast of the ship for good luck when it was installed, perhaps nailed into place.

    But there is still the issue of the shape of the nail hole. As mentioned above, round nails are a newer invention.

    Perhaps someone just nailed it over a doorway for good luck in the late 19th or early 20th century.

  • Options
    TheGasManTheGasMan Posts: 113 ✭✭✭
    edited November 16, 2026 10:51AM

    For what it is worth, AL says this:

    Prompt: old pennies and half pennies used for washers?

    AI Overview

    Yes, old pennies, half cents, and large cents have historically been repurposed and drilled or nailed to be used as makeshift metal washers, shims, or roofing discs.

    Why People Used Coins as Washers

    • Availability and Cost: For over two centuries, people have occasionally drilled or punched holes through copper coins (such as U.S. large cents, half cents, or standard pennies) when a proper metal washer wasn't on hand or when buying hardware store washers cost more than a coin.
    • Roofing and Barn Repairs: Farmers and tradespeople in past generations sometimes nailed half-cents, large cents, or old copper/bronze coins directly onto wooden structures or barn roofs as makeshift backing plates or fasteners.
    • DIY Hardware Fixes: Homeowners and mechanics still occasionally punch or drill a center hole into pennies or vintage coins to use as fender washers, spacer shims, or quick fixes around the workshop.

    Numismatic Note

    While a common DIY trick or a historical quirk to handy-workers, drilling or modifying old coins (especially scarce large cents or half-cents) generally ruins their collectible numismatic value, turning a historical coin into a damaged piece or a conversation item.

    Gary TheGasMan - Retired Hank Hill

  • Options
    gpnycgpnyc Posts: 115 ✭✭✭

    I found this 1809 half cent while metal detecting my property. I've never been able to get a definitive explanation for its purpose.

Leave a Comment

BoldItalicStrikethroughOrdered listUnordered list
Emoji
Image
Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights
Drop image/file