rotated coin in holder...how could this happen?

chrisfl · June 9, 2019 9:33PM

I recently sent in a token to our host in an NGC slab for crossover. When it was returned (DNC) the coin, still in the original holder and with no visible signs of being removed, was rotated about 15 deg counter clockwise .it was the type of insert that makes contact around the entire edge of the coin. I am not crying foul play at all , I just do not see how this could happen.....and I do find it annoying . maybe somebody with insight to the process can shed some light on the matter. Thanks ,Chris

lkeigwin · June 9, 2019 10:18PM

Coins sometimes rotate in their holders. It's not because someone did something wrong. Jostling during handling can cause it.

The good news is if it rotated once it can rotate again. To fix things some collectors repeatedly rap the slab corner on a hard surface. Ultrasonic vibration sometimes works (e.g., with a Sonicare toothbrush). I've shown a youtube video a few times.
Lance.

howards · June 9, 2019 11:46PM

The coin rotated because chickens pecked the slab. That's what you get with "fowl play."

Higashiyama · June 10, 2019 12:20AM

My coins rotate in the safe deposit box. Luckily, I haven't noticed any sign of wear!

chrisfl · June 10, 2019 12:52AM

Thanks lance ,I will give that a try .it just seemed odd.

@Higashiyama said:
My coins rotate in the safe deposit box. Luckily, I haven't noticed any sign of wear!

Now that is odd....

lonn47 · June 10, 2019 12:52AM

so what was the grade when it returned to you. thanks

chrisfl · June 10, 2019 1:03AM

@lonn47 said:
so what was the grade when it returned to you. thanks

DNC .....(did not cross).....it was returned in the same holder with the same grade it was sent in . That’s why I thought it was odd that it rotated, they never removed the coin from the original holder.

Higashiyama · June 10, 2019 1:10AM

@chrisfl said:
Now that is odd ...

I was quite surprised as well, but the bank is on a major street, and it must be vibration from the traffic?

lonn47 · June 10, 2019 2:33AM

just funny hu

ricko · June 10, 2019 5:42AM

The vibration method (with a toothbrush) works well as stated above.... Tapping it on a hard surface will also work, but takes longer....Cheers, RickO

CCGGG · June 10, 2019 6:01AM

I've got newly slabbed coins back from PCGS that were rotated just from handling in the mail. Or I should say, I hope is was from handling in the mail and not sloppy "slabbing at PCGS". Anyway, it doesn't happen a lot and it's usually easy to tap it back in place.

chrisfl · June 10, 2019 8:08PM

@lkeigwin said:
Ultrasonic vibration sometimes works (e.g., with a Sonicare toothbrush).
Lance.

thanks lance it worked well.......sanity restored

@CCGGG said:
I've got newly slabbed coins back from PCGS that were rotated just from handling in the mail. Or I should say, I hope is was from handling in the mail and not sloppy "slabbing at PCGS". Anyway, it doesn't happen a lot and it's usually easy to tap it back in place.

I think it was the mail......I fixed a couple of my coins and I was surprised how easy the coin moved while I was fixing mine.

Thanks all , Chris

AUandAG · June 10, 2019 8:17PM

I used the toothbrush method just once. It was so fun I decided if I could get it to do a 360...... nope it got stuck at 180. But, that's okay because when I sent it back for reholder it came back as a rotated die....

bob

chrisfl · June 10, 2019 8:28PM

@AUandAG said:
I used the toothbrush method just once. It was so fun I decided if I could get it to do a 360...... nope it got stuck at 180. But, that's okay because when I sent it back for reholder it came back as a rotated die....

bob

I would check your toothbrush ......I think you have something special there

Chris

rotated coin in holder...how could this happen?

Comments

Leave a Comment

Categories