Home U.S. Coin Forum

I bought an Indian Head and I need opinions because I'm clueless on copper. UPDATE: Spot removed

FadeToBlackFadeToBlack Posts: 7,847 ✭✭✭✭✭
edited August 15, 2017 8:04PM in U.S. Coin Forum

Updated pic with the spot removed; https://forums.collectors.com/discussion/comment/11778502/#Comment_11778502

Purchased as part of a bigger "collection" if you can call it that.

Yes, there's a spot on the obverse that seems to be PVC or something. I want to remove or neutralize it. I've heard acetone can mess with copper, is it still alright to use here?

Second thing, any thoughts on a grade? Yes, the pictures are accurate, the obverse is more red than the reverse.

Higher res here but be warned that imgur seems to be having issues tonight.

Comments

  • Insider2Insider2 Posts: 14,452 ✭✭✭✭✭

    Looks like a Brown and Red (more brown than red on the important side) Uncirculated coin with an improper alloy mix. Two corrosion spots.

  • pcgs69pcgs69 Posts: 4,378 ✭✭✭✭

    What's going on with the rim around 8 o'clock on the obverse?

  • This content has been removed.
  • Insider2Insider2 Posts: 14,452 ✭✭✭✭✭

    Oh, acetone will not hurt it. I'd use coin care first, then try to push off the "black" using a stereo microscope and something sharp like a sharpened toothpick. Remove the Care with acetone. One of the conservation services should be able to fix it up nice. There are more things that can be done with different products that should not be attempted without experience. It is virtually impossible to ruin your coin with what I've told you.

  • Insider2Insider2 Posts: 14,452 ✭✭✭✭✭

    @pcgs69 said:
    What's going on with the rim around 8 o'clock on the obverse?

    Looks like a rim scrape.

  • OldIndianNutKaseOldIndianNutKase Posts: 2,717 ✭✭✭✭✭

    This is a good date and has value. But not as exists. The coins will ultimately be RB or BN. First off, just immerse the coin in acetone for maybe an hour ( or longer as acetone is not acidic and does not effect the coin's surface), rinse and inspect for any progress. If you have PVC on the obverse, it should be gone. And once you have removed the overlying toning layer the coin may be nice. If you are not happy, you might try MS70 or similar product using a rinse in distilled water. This is about as far as I would go myself in restoring the coin. Past this our host offers restoration services that will provide more expert opinion.

    OINK

  • This content has been removed.
  • pcgs69pcgs69 Posts: 4,378 ✭✭✭✭

    @FadeToBlack said:

    @pcgs69 said:
    What's going on with the rim around 8 o'clock on the obverse?

    Nothing that seems out of place to me? Might just be light and shadows making it seem like there's something there.

    Oops, meant 7 o'clock

  • This content has been removed.
  • Walkerguy21DWalkerguy21D Posts: 11,829 ✭✭✭✭✭

    Certainly has potential - not much to add over what's already been stated.
    I'm not sure if the shallow 'N' variety of this date commands a premium like some other dates do, but it may be worth checking out.

    Successful BST transactions with 171 members. Ebeneezer, Tonedeaf, Shane6596, Piano1, Ikenefic, RG, PCGSPhoto, stman, Don'tTelltheWife, Boosibri, Ron1968, snowequities, VTchaser, jrt103, SurfinxHI, 78saen, bp777, FHC, RYK, JTHawaii, Opportunity, Kliao, bigtime36, skanderbeg, split37, thebigeng, acloco, Toninginthblood, OKCC, braddick, Coinflip, robcool, fastfreddie, tightbudget, DBSTrader2, nickelsciolist, relaxn, Eagle eye, soldi, silverman68, ElKevvo, sawyerjosh, Schmitz7, talkingwalnut2, konsole, sharkman987, sniocsu, comma, jesbroken, David1234, biosolar, Sullykerry, Moldnut, erwindoc, MichaelDixon, GotTheBug
  • rickoricko Posts: 98,724 ✭✭✭✭✭

    Nice old IHC.... needs to have the gunk removed... appears to have a slightly weak strike on the right reverse....could be a slightly thin planchet... even a little weak there on the obverse... Cheers, RickO

  • Insider2Insider2 Posts: 14,452 ✭✭✭✭✭

    @FadeToBlack said:

    @Insider2 said:
    Oh, acetone will not hurt it. I'd use coin care first, then try to push off the "black" using a stereo microscope and something sharp like a sharpened toothpick. Remove the Care with acetone. One of the conservation services should be able to fix it up nice. There are more things that can be done with different products that should not be attempted without experience. It is virtually impossible to ruin your coin with what I've told you.

    I'm familiar with conservation techniques on everything except high grade old copper. I'll give the acetone a shot and see if toothpicking the spots a bit cleans it up.

    @OldIndianNutKase said:
    This is a good date and has value. But not as exists. The coins will ultimately be RB or BN. First off, just immerse the coin in acetone for maybe an hour ( or longer as acetone is not acidic and does not effect the coin's surface), rinse and inspect for any progress. If you have PVC on the obverse, it should be gone. And once you have removed the overlying toning layer the coin may be nice. If you are not happy, you might try MS70 or similar product using a rinse in distilled water. This is about as far as I would go myself in restoring the coin. Past this our host offers restoration services that will provide more expert opinion.

    OINK

    Read what OINK posted. I did not want to reveal MS-70 to you due to the title of your post. This is only one of the very good products to conserve copper and AFAIK it is usually the first choice. Trouble is if there it one spot of reddish corrosion on your coin it will bring it out more, often in a detracting way. :( That discoloration next to "one" may be some of this. MS-70 does not remove etched, black, corrosion. The conservation folks at NCS or PCGS probably know what to do.

  • This content has been removed.
  • Insider2Insider2 Posts: 14,452 ✭✭✭✭✭

    MS-70 should be in every coin dealers bathroom....:) Don't worry about the "blue." If it "turns" it can be easily removed.

  • oih82w8oih82w8 Posts: 12,777 ✭✭✭✭✭

    @pcgs69 said:

    @FadeToBlack said:

    @pcgs69 said:
    What's going on with the rim around 8 o'clock on the obverse?

    Nothing that seems out of place to me? Might just be light and shadows making it seem like there's something there.

    Oops, meant 7 o'clock

    That's ok, he/she is probably on a different time zone.

    oih82w8 = Oh I Hate To Wait _defectus patientia_aka...Dr. Defecto - Curator of RMO's

    BST transactions: dbldie55, jayPem, 78saen, UltraHighRelief, nibanny, liefgold, FallGuy, lkeigwin, mbogoman, Sandman70gt, keets, joeykoins, ianrussell (@GC), EagleEye, ThePennyLady, GRANDAM, Ilikecolor, Gluggo, okiedude, Voyageur, LJenkins11, fastfreddie, ms70, pursuitofliberty, ZoidMeister,Coin Finder, GotTheBug, edwardjulio, Coinnmore, Nickpatton, Namvet69,...
  • This content has been removed.
  • ashelandasheland Posts: 24,076 ✭✭✭✭✭

    Nice addition!

  • fivecentsfivecents Posts: 11,207 ✭✭✭✭✭

    Acetone soak and a rose thorn.

  • edited August 15, 2017 8:09PM
    This content has been removed.
  • KyleKyle Posts: 1,822 ✭✭✭✭✭
    edited August 15, 2017 8:39PM

    Looks better with the spot removed.

    I just noticed in your new pictures that there are some scattered PVC spots around the rim on the obverse.

    Successful BST Transactions With: tonedase, streg2, airplanenut, coindeuce, vibr0nic, natetrook, Shrub68, golden, Lakesammman, drddm, Ilikecolor, CoinJunkie, wondercoin, lablover
  • edited August 15, 2017 8:43PM
    This content has been removed.
  • rickoricko Posts: 98,724 ✭✭✭✭✭

    Nice job.... the acetone usually does the trick....

  • Wabbit2313Wabbit2313 Posts: 7,268 ✭✭✭✭✭

    @OldIndianNutKase said:
    This is a good date and has value. But not as exists. The coins will ultimately be RB or BN. First off, just immerse the coin in acetone for maybe an hour ( or longer as acetone is not acidic and does not effect the coin's surface), rinse and inspect for any progress. If you have PVC on the obverse, it should be gone. And once you have removed the overlying toning layer the coin may be nice. If you are not happy, you might try MS70 or similar product using a rinse in distilled water. This is about as far as I would go myself in restoring the coin. Past this our host offers restoration services that will provide more expert opinion.

    OINK

    Acetone will not remove the toning layer as stated above.

    MS-70 will turn it blue or pink or a combination of the colors 50% of the time. The only way to remove that color is dip it, and I promise you, it will never get in a holder once you do that.

    Finally, it is ridiculous how hard it is to get an Indian graded these days. So many come back questionable color.

  • Insider2Insider2 Posts: 14,452 ✭✭✭✭✭
    edited August 16, 2017 7:12AM

    @Wabbit2313 said: "Acetone will not remove the toning layer as stated above. MS-70 will turn it blue or pink or a combination of the colors 50% of the time. The only way to remove that color is dip it, and I promise you, it will never get in a holder once you do that."

    Rats, I was itching to push the :( button. I disagree with all but the last sentence above.

    Acetone WILL lighten up some types of toning. Mostly however, your Q-tip will be darker from the dirt and "skin" if it is also present and I rarely encounter a "raw" Indian cent that cannot be cleaned to improve it.

    While I'll agree that MS-70 will turn coins blue, in my extensive experience cleaning coins (sorry, I need to reveal that to add "weight" to my opinion), the percentage is not near 50% unless there is something else (?) besides acetone in the reaction.

    BTW, there are proprietary methods to remove much of the black corrosion from the rim or edge ONLY w/o dipping the entire coin and ruining it.

    Finally, I'll add that the "blue color" is already on the coin's surface and the acetone or MS-70 just reveals it by removing any overlying contamination...LOL!

    DEFINITELY NOT TRUE :p

    PS Nice job OP.

  • Wabbit2313Wabbit2313 Posts: 7,268 ✭✭✭✭✭

    I guess I should have added on Uncirculated Indians. They turn a funky color about 1/2 the time when I have used MS70.

  • Wabbit2313Wabbit2313 Posts: 7,268 ✭✭✭✭✭

    In the old days, it was easy to turn an Indian "red" with a dip and they would holder them. Not anymore.

  • Insider2Insider2 Posts: 14,452 ✭✭✭✭✭
    edited August 16, 2017 7:45AM

    @Wabbit2313 said: "In the old days, it was easy to turn an Indian "red" with a dip and they would holder them. Not anymore."

    Well, you must have done it yourself and sent them in otherwise I'll take your statement as hearsay! Did you do it with your personal submissions?

    If not, them's fighting words! So, ANACS, NCI, and INSAB - the only game in town - graded dipped and unnaturally red copper. That's my "old day's," way before the others came along. Hard to believe.

    What I will believe (I've seen it for myself) is in the mid-1980's the "new" TPGS's went through the same "learning process" the other services that predated them had to go through. Many mistakes due to surface alterations were missed that were not tolerated at other services. From what I determined under high magnification at the time (1986), the unnatural color you may be alluding to was not caused by coin dip.

  • Wabbit2313Wabbit2313 Posts: 7,268 ✭✭✭✭✭

    Go look on Coinfacts, you will see a bunch of bright red dipped indians.

  • Insider2Insider2 Posts: 14,452 ✭✭✭✭✭

    @Wabbit2313 said: "Go look on Coinfacts, you will see a bunch of bright red dipped indians."

    LOL. Glad to learn you were not trying to "scam" the TPGS's. I'm going to make a "nutty" post too just to make a point: There are probably professional photographers who can make the image of a natural red Indian cent appear to be yellow with black eyes and a smile. Get it? Since your opinion is based on computer images it is well ....

    Sorry to say, but not really. :blush:

  • Wabbit2313Wabbit2313 Posts: 7,268 ✭✭✭✭✭

    @Insider2 said:
    @Wabbit2313 said: "Go look on Coinfacts, you will see a bunch of bright red dipped indians."

    LOL. Glad to learn you were not trying to "scam" the TPGS's. I'm going to make a "nutty" post too just to make a point: There are probably professional photographers who can make the image of a natural red Indian cent appear to be yellow with black eyes and a smile. Get it? Since your opinion is based on computer images it is well ....

    Sorry to say, but not really. :blush:

    I have no idea what you are talking about, and not sure you do either??

  • Insider2Insider2 Posts: 14,452 ✭✭✭✭✭

    @Wabbit2313 said: I have no idea what you are talking about, and not sure you do either??

    Here is what I do know:

    1. You claimed to know for a fact that dipped copper was graded original mint red by the TPGS but not anymore. I'll quote you: "In the old days, it was easy to turn an Indian "red" with a dip and they would holder them. Not anymore."
    2. The only way you could "know" for sure (100%) that was true is if you did it yourself.
    3. The color of metal in an image can be altered by lighting and today, photo-shopped.
    4. Some posters may not be as knowledgeable about the English language or copper and its color as I formerly believed. :smiley:
  • TwoSides2aCoinTwoSides2aCoin Posts: 44,709 ✭✭✭✭✭

    In the quest for a better coin, look elsewhere. This is THE LAB report.

Leave a Comment

BoldItalicStrikethroughOrdered listUnordered list
Emoji
Image
Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights
Drop image/file