Options
Coins and Lapidary.
SanctionII
Posts: 13,327 ✭✭✭✭✭
Have coin holders been made out of stone?
Could one skilled at Lapidary make such holders?
I have a stone which has been in my family for ovet 50 years. Attached are photos. I wonder if one who does Lapidary cut cut the stone and make some "slab" holders?
What say you?




3
Comments
Have you been in Jessups stash?
that doesn't sound very realistic or practical.
It sounds like an interesting project! Somebody on the boards could probably produce a slab out of it for you.
That would make a nice doorstop.
In honor of the memory of Cpl. Michael E. Thompson
The stone might be quartz containing veins of gold (or pyrite). (Gold will deform when pressed and pyrite will crumble.)
A diamond bladed saw could cut a slab insert, and then plastic used for the faces. This type of quartz is not very strong and thin pieces used for facing would probably fall apart unless impregnated with resin.
Aren't most stones porous?
Can you image the turn around times at PCGS?
"Sorry to inform you, but we have experienced another mine cave in, which will delay the slabbing of all pending orders. This delay has added another 267 days to our current turn around time".
You went and made me lookup "Lapidary".
"If I say something in the woods and my wife isn't there to hear it.....am I still wrong?"
My Washington Quarter Registry set...in progress
Not to put words in anyone's mouth, but I think that Sanction means the making of an 'easel' type thing, to hold a slab for display. Not an actual stone slab for the encasing of a coin.
I just started in lapidary but here's a different a cut makes
Just checked this thread. Thanks for the responses.
1. I have not yet had the pleasure of getting to know the Colonel and have not been in his stash.
2. I was not thinking of the stone being used as an easel. I was thinking of having the stone cut into thin squares or rectangles (like the middle section of a Capital holder) and then have holes cut into the squares to hold a coin or coins.
3. I suspect that the stone contains quartz.
4. Smitty's photographs of a similar stone, both before and after cutting are very cool; and I think the same result would happen if my stone were cut and polished.
5. RogerB's reply is interesting. Since I know next to nothing about rocks and what can be done with them through the Lapidary arts, I need to find someone knowledgeable. I would like to have that person evaluate the stone to determine if it would be feasible to cut and polish same into the thin squares and rectangles described in #2 above.
If it is feasible to cut up the stone and make a number of coin holders out of it, that would be a great way to display a few of my favorite coins in my collection [probably some of the better coins that I obtained as a YN that have sentimental value to me] in an interesting and attractive manner.
If anyone else has any knowledge about Lapidary and what is possible with this stone do not hesitate to reply.
definitely puts a different spin on the term "slabbed coin."
http://forum.rocktumblinghobby.com
might help you
Actually ones that would work pretty well as an attractive complement to coins would be iron-nickel meteorite's that have the Widmanstatten pattern. The pattern is caused by long iron-nickel crystals. You can find them in both a silver color and a gold color, so you could decide how to display your coin. Given that the meteorite is actually metal, it cuts quite nicely, polishes up well, and could be dropped with probably only some dinging around the edges, e.g. it shouldn't shatter. Here are two examples...
U.S. Type Set
I see no problem cutting into slabs and cutting a hole for the appropriate size. The problem comes in making prongs to hold the coin!
bob:)
It certainly can be done.... I have seen lapidary frames for pictures in shops in WA state. Quartz and Amethyst are frequent types used. There are rock shops that can help... I had one stone faced in such a shop in CA....
As far as inserts, rubber or plastic rings would work if done to the proper size. Cheers, RickO
That looks like quartz with gold. Pretty cool. I think you could do it, but do it with another stone....
siliconvalleycoins.com
This sounds like an interesting idea...I really like the family heirloom too!
BST transactions: dbldie55, jayPem, 78saen, UltraHighRelief, nibanny, liefgold, FallGuy, lkeigwin, mbogoman, Sandman70gt, keets, joeykoins, ianrussell (@GC), EagleEye, ThePennyLady, GRANDAM, Ilikecolor, Gluggo, okiedude, Voyageur, LJenkins11, fastfreddie, ms70, pursuitofliberty, ZoidMeister,Coin Finder, GotTheBug, edwardjulio, Coinnmore, Nickpatton, Namvet69,...
SkyMan - You can also get a Widmanstatten pattern out of titanium alloys. Unfortunately the crystal structure isn't nearly as large and dramatic as seen in iron/nickel meteorites.