Options
Cracked my first SEGS slab today.
robertpr
Posts: 6,862 ✭✭✭
The seam looked like a weak point to me...tapped a screw driver into it and twisted, worked the screwdriver around the seam and kept twisting as I went. Coin was safely cracked out in under 20 seconds. I thought these were supposed to be difficult to open?
0
Comments
Both were done in under 5 seconds each.
Ngc won for a smoother crack
Not really looking for much these days but if I were, it might be a toner.
<< <i>The seam looked like a weak point to me...tapped a screw driver into it and twisted, worked the screwdriver around the seam and kept twisting as I went. Coin was safely cracked out in under 20 seconds. I thought these were supposed to be difficult to open?
Your referring to "SEGS" and not "SGS" Right??
The name is LEE!
<< <i>I use a small pair of bolt cutters. They do the job nice and quick. >>
+1
I call my bolt cutter "The Jaws of Life" . . .
Screwdrivers seem risky to me also. SEGS is much much tougher. Ideally, because they are so prevalent at shows, a decent vise is more stable and creates greater pressure.
<< <i>The seam looked like a weak point to me...tapped a screw driver into it and twisted, worked the screwdriver around the seam and kept twisting as I went. Coin was safely cracked out in under 20 seconds. I thought these were supposed to be difficult to open?
It's a lot harder to crack these SEGS holders if someone hasn't already opened it prior and switched the coin
jk of course. Let's see the coin though or at least, what is it?
Liberty: Parent of Science & Industry
What was the coin that you removed, and more importantly, do you have images to share?
BST transactions: dbldie55, jayPem, 78saen, UltraHighRelief, nibanny, liefgold, FallGuy, lkeigwin, mbogoman, Sandman70gt, keets, joeykoins, ianrussell (@GC), EagleEye, ThePennyLady, GRANDAM, Ilikecolor, Gluggo, okiedude, Voyageur, LJenkins11, fastfreddie, ms70, pursuitofliberty, ZoidMeister,Coin Finder, GotTheBug, edwardjulio, Coinnmore, Nickpatton, Namvet69,...
His method is just beating them with a hammer against an anvil.
<< <i>tapped a screw driver into it and twisted, worked the screwdriver around the seam and kept twisting as I went. >>
This sounds like a disaster waiting to happen. None of the pros would use this method.
Coin Rarities Online
Believe me I have been there.
buffnixx
a.k.a "The BUFFINATOR"
Most important.....I am in TOTAL CONTROL AT ALL TIMES.
I can't imagine hitting or cracking or vise squeezing. You are NEVER in control with any of these methods!
Have only done two SEGS and they were both a bear, because the plastic is so soft, it wants to bend and deform instead of break in my experience
No matter what, slab is wrapped in cloth to contain debris, and I'm also wearing safety glasses.
Liberty: Parent of Science & Industry
<< <i>How does PCGs and NGC and others break out the slabs of others do they have a special machine do it cleanly and quickly? >>
Several years ago I read on here that PCGS uses a bandsaw. It's relatively fast, makes a very clean cut, is highly controllable, and is safe for the coin. I also think that's the best solution vs. a jigsaw or table saw.