I'm not here to yank chains or sell you something.as far as these dimes all I know is that they are not supposed to be brown or charcol in color.I'm a why person.I'm also not going to pay someone to tell me its a dime.My father was in the navy and collected coins from all around the globe.Someday I'll inherit his collection.Just trying to educate my self.I have always picked up unusual looking coins and yes have always put them in the same wine bottle in my closet since I was a little Kid (seemed like a good place to put them at the time).
have no plans of being and expert or master.Just here to pick brains the two dimes are unusual and are in coin holders to be added to my dads colection someday.Thank you for educating me.
I know its a reach but i was looking at the centismo .they look in color like the color of this dime and have a compo of 95 % copper 5% zinc.They have struck U.S. dimes on U.S. penny blanks and pennies on dimes.Could this happen with the Panama coins demension wise
Go look at an image of a centismo that color is the color of this dime.
(I know I'm going to regret getting into this, but......)
Coinstudy - your coin has a dark copper color, and shows 'no outer cladding' on the edge, because it's been corroded; we can see the dark surfaces on the dime - due to it being buried, or sometype of enviornmental damage.
If it weren't for that, you'd probably be able to see the copper core only in the center of the edge. It looks 'all copper' on the side of the coin due to the enviormental damage.....
Just my opinion.....
Retired Collector & Dealer in Major Mint Error Coins & Currency since the 1960's.Co-Author of Whitman's "100 Greatest U.S. Mint Error Coins", and the Error Coin Encyclopedia, Vols., III & IV. Retired Authenticator for Major Mint Errors for PCGS. A 50+ Year PNG Member.A full-time numismatist since 1972, retired in 2022.
<< <i>I know its a reach but i was looking at the centismo .they look in color like the color of this dime and have a compo of 95 % copper 5% zinc.They have struck U.S. dimes on U.S. penny blanks and pennies on dimes.Could this happen with the Panama coins demension wise
Go look at an image of a centismo that color is the color of this dime.
Then I will go away >>
Your attempt at explaining the usual with the unusual has you not considering the facts in front of you.
95% copper 5% zinc Centisimo, I suppose Panama
the coin shows "silver" on the rim -- a centisimo would not do this there is some "clad" appearance on the edge
There are remnants of reeding on the edge. The coin was struck in the collar. That's 17.91mm for a dime. From the link you provided: The Panama Centisimo is 19.05mm. That is too big for a dime collar. The Panama centisimo is 3.11 grams, you measured your's as between 2.2g and 2.3g (dime is 2.268g)
In the year 1966, Panama altered the constitution of the currency’s silver coins. The 1/10 and the ¼ balboa were reintroduced as copper coins plated with cupro-nickel.
Now this explains a lot."panama altered the constitution of" from silver to copper.It also states "plated" not "clad".there must be a difference like in 1965 the U.S. reintroduced from silver to clad dimes and quarters.The following year Panama reintroduced from silver to copper dimes and Quarters.
This is just my opinion.I think the Panama blanks are more copper dominant than the U.S. blanks.The pictures do the coin no justice.I bought this coin off Ebay for 99 cents.she had it listed as a brown dime.I sent the seller a note stating no one will ever take this seriously.She replied"its something about the metal.She said let them laugh.I have a U.S. clad dime blank.Think I'll look for a panama dime blank.......laugh on!
In 1966 Panama minted their .10 .the U.S. minted Panama .25
No point in spending 50.00 for someone else to tell me I have a dime when I know that.I'm not selling it.What a racket.Send it to the coin Gods.I'm just having fun.The knowledge is out there for free......just have to look.
misuse of word "plated" instead of "clad" just like "lamination error" should more correctly be called a "delamination error." lamination implies even coins that are 90%silver are laminated in some way.
As CaptHenway has told you twice already, the specifications for 1/10 Balboa and US clad dimes are exactly the same. FredWeinberg (FW) also has decades of ERROR coin experience, and he told you it's an environmentally damaged dime.
Your "cheat sheet" even says 75% copper 25% nickel over 100% copper for the Balboa. US dimes are 75% copper 25% nickel clad. (note 75/25)
Also, the last place you want to learn bout errors from is eBay. The ebay sellers will list any little weirdness as an error with some silly explanation. The pictures do it justice just fine. It's a once buried dime worth 10cents. I'd buy it for 10c if you paid me the cost to send you the 10cents.
I'm sending you a note: no one will ever take this seriously. Even once you hand it down to heirs.
Currently, 1 and 5 centesimos, as well as the 1/10, ½, and 1/4 coins all have the dimensions, weight, and compositions of the following US coins: half-dollar, quarter, dime, nickel, and cent.
Professional Numismatist, Retired. 55 year member ANA. Former ANA Senior Authenticator. Winner of four ANA Heath Literary Awards; three Wayte and Olga Raymond Literary Awards; Numismatist of the Year Award 2009, and ANA Lifetime Achievement Award 2020. Winner of the PNG's 2026 Robert Friedberg Award for "The Enigmatic Lincoln Cents of 1922," Available now from Whitman or Amazon.
<< <i>The knowledge is out there for free......just have to look. >>
and the quality of the free info??? You get info from pages of unknown reliability.
on the other hand....
Fred's Story Fred's Avatar is His Book Authors Nicholas Brown, David Camire, and Fred Weinberg are three of the nation's most famous error-coin specialists, and they open the doors to the U.S. Mint to show you how and why error coins occur. Published by Whitman, a leader in coin book publishing.
Hmmmm... who do I trust more? anonymous web page or published author?
And you can't even ask those web page authors if they know the difference between clad and plated...
Mark anderson.i like you're writing style.it makes it .2times simpler to read your posts,than any other posts.Keep up the good work!just my.10 cents worth.
<< <i>The knowledge is out there for free......just have to look. >>
and the quality of the free info??? You get info from pages of unknown reliability.
on the other hand....
Fred's Story Fred's Avatar is His Book Authors Nicholas Brown, David Camire, and Fred Weinberg are three of the nation's most famous error-coin specialists, and they open the doors to the U.S. Mint to show you how and why error coins occur. Published by Whitman, a leader in coin book publishing.
Hmmmm... who do I trust more? anonymous web page or published author?
And you can't even ask those web page authors if they know the difference between clad and plated...
>>
Night of the Living Dead: Reanimation? I know those faces.
Actually this 1967 dime has what I would say is a good strike.Not a error one.It is just on the wrong metal.I respect Freds vast knoledge he has gained in opening the doors to the U.S. mint.But what about the Panama mint.The Nation of Panama is a republic to the U.S. with its own fully functioning government closely lead and guided by the U.S.
In some instances they would provide their own stock and in some instances the U.S. would provide.
What I' m being told here is "you are color blind" and we know all.Duh a 1967 dime is silver in color, not brown! It's not rocket science! If you lived next door I would bring it over and show you this dime.My simple understanding is that copper and bronze are more brown in color than nickle.I also now know it's not a paint job! Just trying to figure out why? Nothing to prove
Professional Numismatist, Retired. 55 year member ANA. Former ANA Senior Authenticator. Winner of four ANA Heath Literary Awards; three Wayte and Olga Raymond Literary Awards; Numismatist of the Year Award 2009, and ANA Lifetime Achievement Award 2020. Winner of the PNG's 2026 Robert Friedberg Award for "The Enigmatic Lincoln Cents of 1922," Available now from Whitman or Amazon.
We also see the "silver" rim on it... even a bit of the ear and bits of "ERTY" are "silver" && in the reverse pictures there is a "silvery" spot between "America" and "Dime" on the rim.
You have yet to deal with that aspect... and I've brought up the silver rim before...
"We know all?" ... "Well, we can see the 'silver.' " Your explanation?
That's why I'm here.Could it be a possibility that Panama produced there own planchet's that are just like the U.S. except they plated over the nickle with copper or bronze.Maybe like for a commemorative or a specialty coin? Looking at this coin this is how it appears.It looks like ware through a plate of copper or bronze revealing nickle beneath.Have you heard of such a thing? Could it be possible that Panama produced a planchet that is both clad and plated? It could be that this happened in 1966 only and some of this stock made it to the U.S..
On the cheat sheet it shows that the U.S. did not mint the ten cent in 1966.In an article I read it stated that in 1966 is when Panama went off silver to copper .And to indicate this changeover produced blanks to mark it.
In 1967 the U.S. did mint ten cent's for Panama.It is my thought that some of this stock made it or was brought to the U.S. to exhaust their supply of this particular stock. Thus a 1967 U.S. dime on Panama stock
There would be know way to prove this.It's just one possibility. I could be wrong.
but then someplace else says "provided their own stock" and the first document is out the window? Now they provide some new material not listed in the first document?
Yes, I know a CWT isn't a US coin, but it helps get the thread back on track.
Gone but not forgotten: IGWT, Speedy, Bear, BigE, HokieFore, John Burns, Russ, TahoeDale, Dahlonega, Astrorat, Stewart Blay, Oldhoopster, Ricko, Big Moose, Cardinal, CoinsAreFun.
Just like this article.Trust I don't know....information maybe.It's funny.In trying to learn about this dime is how I wound up in this thread.Someone further back in the thread mentioned that it's four years old.Now its off subject.This wasn't my intention.So I'll get out of the way.Thanks for the help and Opinion.
Professional Numismatist, Retired. 55 year member ANA. Former ANA Senior Authenticator. Winner of four ANA Heath Literary Awards; three Wayte and Olga Raymond Literary Awards; Numismatist of the Year Award 2009, and ANA Lifetime Achievement Award 2020. Winner of the PNG's 2026 Robert Friedberg Award for "The Enigmatic Lincoln Cents of 1922," Available now from Whitman or Amazon.
It's struck on a Mexican 1 reale - from the Tannenbaum collection via QDB. Can't see the date, but based on the MM, 1780's.
Gone but not forgotten: IGWT, Speedy, Bear, BigE, HokieFore, John Burns, Russ, TahoeDale, Dahlonega, Astrorat, Stewart Blay, Oldhoopster, Ricko, Big Moose, Cardinal, CoinsAreFun.
Gone but not forgotten: IGWT, Speedy, Bear, BigE, HokieFore, John Burns, Russ, TahoeDale, Dahlonega, Astrorat, Stewart Blay, Oldhoopster, Ricko, Big Moose, Cardinal, CoinsAreFun.
Just like this article.Trust I don't know....information maybe.It's funny.In trying to learn about this dime is how I wound up in this thread.Someone further back in the thread mentioned that it's four years old.Now its off subject.This wasn't my intention.So I'll get out of the way.Thanks for the help and Opinion. >>
I wouldn't worry about it too much.
Still on topic, just focused on one subject right now.
I can't go through and verify each entry of that, so I'm keeping it around but would verify info before use.
CaptHenway has verified that the compostion of 1/10 balboas are the same specs and composition as us dimes. DorkGirl (Becky) is a coin collector in Panama and would say something if this were not true.
what is most likely meant by supplying own stock is: the mint's yearly mintage varies and they can't predict it exactly. So, in some years they may have excess stock that could be sold to Panama at cost. It'd be easier for Panama to buy what excess the mint already has. Other years, Panama couldn't do this because the mint was striking all their stock.
Due to economies of scales, it would be costly for Panama to procure stock from sources outside of what the us mint used.
And finally, you've got a lot of collectors with years of experience looking at coins that can tell a discolored dime when they see it. Their professional opinion is you have a discolored dime and that is it.
Just like this article.Trust I don't know....information maybe.It's funny.In trying to learn about this dime is how I wound up in this thread.Someone further back in the thread mentioned that it's four years old.Now its off subject.This wasn't my intention.So I'll get out of the way.Thanks for the help and Opinion. >>
I wouldn't worry about it too much.
Still on topic, just focused on one subject right now.
I can't go through and verify each entry of that, so I'm keeping it around but would verify info before use.
CaptHenway has verified that the compostion of 1/10 balboas are the same specs and composition as us dimes. DorkGirl (Becky) is a coin collector in Panama and would say something if this were not true.
what is most likely meant by supplying own stock is: the mint's yearly mintage varies and they can't predict it exactly. So, in some years they may have excess stock that could be sold to Panama at cost. It'd be easier for Panama to buy what excess the mint already has. Other years, Panama couldn't do this because the mint was striking all their stock.
Due to economies of scales, it would be costly for Panama to procure stock from sources outside of what the us mint used.
And finally, you've got a lot of collectors with years of experience looking at coins that can tell a discolored dime when they see it. Their professional opinion is you have a discolored dime and that is it. >>
On that dime.It's also a good possibility of an annealing error.The error is where the copper in the clad alloy can seporate from the nickle and migrate to the surface resulting in brown, red, and black colors on the surface.This would explain the brown on the reeding , obverse & reverse.Thanks again.
Retired Collector & Dealer in Major Mint Error Coins & Currency since the 1960's.Co-Author of Whitman's "100 Greatest U.S. Mint Error Coins", and the Error Coin Encyclopedia, Vols., III & IV. Retired Authenticator for Major Mint Errors for PCGS. A 50+ Year PNG Member.A full-time numismatist since 1972, retired in 2022.
Comments
<< <i>1) 1967 phillipino 10 centimos. Minted SanFrancisco. Compo70% copper, 18% zinc, 12% nickle.Can be struck on u.s. stock.
2) 1967 El Salvador 10 centavos.Minted Denver. Compo 70% copper, 25% nickle.Can not be struck on u.s. stock. >>
check the weights and diameters. you'll see they are off of your dime's weight. you really need a scale that does 1/100ths of a gram.
1) weight 2.00 grams, 17.9 mm (weight is wrong)
2) weight 7.00 grams 26.0mm, 5 centavos 5.00 grams 23.0mm (wrong all over the place)
Also, since neither are clad, both will have a "silver" edge.
<< <i>at this point, I think you're just yanking our chains. >>
Sure, but this is better than an open forum cheat thread!
<< <i>What do you think start scrapping?.......it's just a dime! Ha, ha, ha >>
yes. you could take some toothpaste and a washcloth and polish it up.
before - dime worth 10 cents
after - dime worth 10 cents
have no plans of being and expert or master.Just here to pick brains the two dimes are unusual and are in coin holders to be added to my dads colection someday.Thank you for educating me.
it is discolored from being buried.
<< <i>us nickel struck on a us nickel planchet
I likey, very much so.
Go look at an image of a centismo that color is the color of this dime.
Then I will go away
Coinstudy - your coin has a dark copper color, and shows
'no outer cladding' on the edge, because it's been corroded;
we can see the dark surfaces on the dime - due to it being
buried, or sometype of enviornmental damage.
If it weren't for that, you'd probably be able to see the copper
core only in the center of the edge. It looks 'all copper' on the
side of the coin due to the enviormental damage.....
Just my opinion.....
<< <i>I know its a reach but i was looking at the centismo .they look in color like the color of this dime and have a compo of 95 % copper 5% zinc.They have struck U.S. dimes on U.S. penny blanks and pennies on dimes.Could this happen with the Panama coins demension wise
Go look at an image of a centismo that color is the color of this dime.
Then I will go away >>
Your attempt at explaining the usual with the unusual has you not considering the facts in front of you.
95% copper 5% zinc Centisimo, I suppose Panama
the coin shows "silver" on the rim -- a centisimo would not do this
there is some "clad" appearance on the edge
There are remnants of reeding on the edge. The coin was struck in the collar. That's 17.91mm for a dime.
From the link you provided:
The Panama Centisimo is 19.05mm. That is too big for a dime collar.
The Panama centisimo is 3.11 grams, you measured your's as between 2.2g and 2.3g (dime is 2.268g)
Your coin was once buried. It's essentially "Environmental Damage" from being buried.
You have your answer.
Now this explains a lot."panama altered the constitution of" from silver to copper.It also states "plated" not "clad".there must be a difference like in 1965 the U.S. reintroduced from silver to clad dimes and quarters.The following year Panama reintroduced from silver to copper dimes and Quarters.
This is just my opinion.I think the Panama blanks are more copper dominant than the U.S. blanks.The pictures do the coin no justice.I bought this coin off Ebay for 99 cents.she had it listed as a brown dime.I sent the seller a note stating no one will ever take this seriously.She replied"its something about the metal.She said let them laugh.I have a U.S. clad dime blank.Think I'll look for a panama dime blank.......laugh on!
No point in spending 50.00 for someone else to tell me I have a dime when I know that.I'm not selling it.What a racket.Send it to the coin Gods.I'm just having fun.The knowledge is out there for free......just have to look.
As CaptHenway has told you twice already, the specifications for 1/10 Balboa and US clad dimes are exactly the same. FredWeinberg (FW) also has decades of ERROR coin experience, and he told you it's an environmentally damaged dime.
Your "cheat sheet" even says 75% copper 25% nickel over 100% copper for the Balboa. US dimes are 75% copper 25% nickel clad. (note 75/25)
Also, the last place you want to learn bout errors from is eBay. The ebay sellers will list any little weirdness as an error with some silly explanation. The pictures do it justice just fine. It's a once buried dime worth 10cents. I'd buy it for 10c if you paid me the cost to send you the 10cents.
I'm sending you a note: no one will ever take this seriously. Even once you hand it down to heirs.
Currently, 1 and 5 centesimos, as well as the 1/10, ½, and 1/4 coins all have the dimensions, weight, and compositions of the following US coins: half-dollar, quarter, dime, nickel, and cent.
<< <i>The knowledge is out there for free......just have to look. >>
and the quality of the free info??? You get info from pages of unknown reliability.
on the other hand....
Fred's Story
Fred's Avatar is His Book
Authors Nicholas Brown, David Camire, and Fred Weinberg are three of the nation's most famous error-coin specialists, and they open the doors to the U.S. Mint to show you how and why error coins occur.
Published by Whitman, a leader in coin book publishing.
Hmmmm... who do I trust more? anonymous web page or published author?
And you can't even ask those web page authors if they know the difference between clad and plated...
<< <i>
<< <i>The knowledge is out there for free......just have to look. >>
and the quality of the free info??? You get info from pages of unknown reliability.
on the other hand....
Fred's Story
Fred's Avatar is His Book
Authors Nicholas Brown, David Camire, and Fred Weinberg are three of the nation's most famous error-coin specialists, and they open the doors to the U.S. Mint to show you how and why error coins occur.
Published by Whitman, a leader in coin book publishing.
Hmmmm... who do I trust more? anonymous web page or published author?
And you can't even ask those web page authors if they know the difference between clad and plated...
Night of the Living Dead: Reanimation? I know those faces.
Eric
<< <i>We all have opinions and that's ok and opinions are not always in agreement.I might be wrong!.....Lol >>
FACTS are not opinions ...................... GEEEEEZ
In some instances they would provide their own stock and in some instances the U.S. would provide.
What I' m being told here is "you are color blind" and we know all.Duh a 1967 dime is silver in color, not brown! It's not rocket science! If you lived next door I would bring it over and show you this dime.My simple understanding is that copper and bronze are more brown in color than nickle.I also now know it's not a paint job!
Just trying to figure out why? Nothing to prove
<< <i>........ into the wind >>
The wind is still blowing......
<< <i>... "you are color blind" and we know all.
Duh a 1967 dime is silver in color, not brown! >>
We can see it. It is generally dark in color.
We also see the "silver" rim on it... even a bit of the ear and bits of "ERTY" are "silver" && in the reverse pictures there is a "silvery" spot between "America" and "Dime" on the rim.
You have yet to deal with that aspect... and I've brought up the silver rim before...
"We know all?" ... "Well, we can see the 'silver.' " Your explanation?
On the cheat sheet it shows that the U.S. did not mint the ten cent in 1966.In an article I read it stated that in 1966 is when Panama went off silver to copper .And to indicate this changeover produced blanks to mark it.
In 1967 the U.S. did mint ten cent's for Panama.It is my thought that some of this stock made it or was brought to the U.S. to exhaust their supply of this particular stock. Thus a 1967 U.S. dime on Panama stock
There would be know way to prove this.It's just one possibility. I could be wrong.
but then someplace else says "provided their own stock" and the first document is out the window? Now they provide some new material not listed in the first document?
<< <i>Yes, I know a CWT isn't a US coin, but it helps get the thread back on track.
Interesting.
Just like this article.Trust I don't know....information maybe.It's funny.In trying to learn about this dime is how I wound up in this thread.Someone further back in the thread mentioned that it's four years old.Now its off subject.This wasn't my intention.So I'll get out of the way.Thanks for the help and Opinion.
<< <i>what is that CWT struck on? >>
Looks like a Mexican, Peru, or Bolivia 1/2 Reale as you can see the Pillars from the host coin on the reverse.
<< <i>http://minterrornews.com/news-5-13-03-foreigners_in_the_mint.html
Just like this article.Trust I don't know....information maybe.It's funny.In trying to learn about this dime is how I wound up in this thread.Someone further back in the thread mentioned that it's four years old.Now its off subject.This wasn't my intention.So I'll get out of the way.Thanks for the help and Opinion. >>
I wouldn't worry about it too much.
Still on topic, just focused on one subject right now.
I can't go through and verify each entry of that, so I'm keeping it around but would verify info before use.
CaptHenway has verified that the compostion of 1/10 balboas are the same specs and composition as us dimes.
DorkGirl (Becky) is a coin collector in Panama and would say something if this were not true.
what is most likely meant by supplying own stock is: the mint's yearly mintage varies and they can't predict it exactly. So, in some years they may have excess stock that could be sold to Panama at cost. It'd be easier for Panama to buy what excess the mint already has. Other years, Panama couldn't do this because the mint was striking all their stock.
Due to economies of scales, it would be costly for Panama to procure stock from sources outside of what the us mint used.
And finally, you've got a lot of collectors with years of experience looking at coins that can tell a discolored dime when they see it. Their professional opinion is you have a discolored dime and that is it.
The edge.
The reeding is not full, it is worn.
Yet the edge is discolored.
So, you'd have to tell me it was plated after it was circulated. That doesn't fit your story.
It was circulated then discolored due to "environmental damage," then circulated some more.
<< <i>
<< <i>http://minterrornews.com/news-5-13-03-foreigners_in_the_mint.html
Just like this article.Trust I don't know....information maybe.It's funny.In trying to learn about this dime is how I wound up in this thread.Someone further back in the thread mentioned that it's four years old.Now its off subject.This wasn't my intention.So I'll get out of the way.Thanks for the help and Opinion. >>
I wouldn't worry about it too much.
Still on topic, just focused on one subject right now.
I can't go through and verify each entry of that, so I'm keeping it around but would verify info before use.
CaptHenway has verified that the compostion of 1/10 balboas are the same specs and composition as us dimes.
DorkGirl (Becky) is a coin collector in Panama and would say something if this were not true.
what is most likely meant by supplying own stock is: the mint's yearly mintage varies and they can't predict it exactly. So, in some years they may have excess stock that could be sold to Panama at cost. It'd be easier for Panama to buy what excess the mint already has. Other years, Panama couldn't do this because the mint was striking all their stock.
Due to economies of scales, it would be costly for Panama to procure stock from sources outside of what the us mint used.
And finally, you've got a lot of collectors with years of experience looking at coins that can tell a discolored dime when they see it. Their professional opinion is you have a discolored dime and that is it. >>
You're going to give yourself an aneurysm....
Brown colored quarter
Even the rims are like your dime. This is why I called it a dryer coin.
<< <i>
Glad it wasn't anything valuable as I just noticed what was used on it to show the rim
<< <i>Only have one i found in a bag of Jeffersons.
way cool