Home› U.S. Coin Forum
Options

Post a US coin struck on a foreign planchet

Here's a 1968-D Kennedy Half struck on a Brazil 10 centavos planchet, composition of 75% copper / 25% nickel and weighs 5.7 grams. The US did not strike coins for Brazil, instead making only blank planchets.
Anyone care to post another US coin on a foreign planchet they own?
imageimage
«13

Comments

  • Options
    MWallaceMWallace Posts: 4,736 ✭✭✭✭✭
    I have a 1974 Kennedy Half struck on a Taiwan $5 planchet, but no photos available.
  • Options
    RampageRampage Posts: 9,704 ✭✭✭✭✭


    << <i>I have a 1974 Kennedy Half struck on a Taiwan $5 planchet, but no photos available. >>



    I, too, have one. I used to have pictures of mine posted on here, but I've since removed them. It is in a PCGS MS63 holder and quite a coin. When I get back home this weekend, I will repost.
  • Options
    MsMorrisineMsMorrisine Posts: 40,333 ✭✭✭✭✭
    where were these coins found?
    Current maintainer of Stone's Master List of Favorite Websites // My BST transactions
  • Options
    RampageRampage Posts: 9,704 ✭✭✭✭✭


    << <i>where were these coins found? >>



    Well, I bought mine maybe two years ago. It was in a group of two hundred very minor (die chip, some clips, grease,etc.) error coins. Anyway, I made a very fair offer and got the group. I then sent the coin to PCGS who authenticated it and graded it MS63.

    The group I bought looked like it was assembled years and years ago. Nothing dated beyond 1975 or so. So, I have a feeling this particular error was found around the time of its release and was kept there. All the flips had the yellow age stains and rusted staples.
  • Options
    goodmoney4badmoneygoodmoney4badmoney Posts: 1,331 ✭✭✭✭✭


    << <i>

    << <i>where were these coins found? >>



    Well, I bought mine maybe two years ago. It was in a group of two hundred very minor (die chip, some clips, grease,etc.) error coins. Anyway, I made a very fair offer and got the group. I then sent the coin to PCGS who authenticated it and graded it MS63.

    The group I bought looked like it was assembled years and years ago. Nothing dated beyond 1975 or so. So, I have a feeling this particular error was found around the time of its release and was kept there. All the flips had the yellow age stains and rusted staples. >>



    Nice pick up! I thought / hoped at least ONE other coin would be pictured, it would be great to see it.
  • Options
    RampageRampage Posts: 9,704 ✭✭✭✭✭
    I promise I will post it when I get home this weekend. I also have a couple of Lincolns on foreign planchets. Not as great as the Taiwan plachet error, but still cool.
  • Options
    RampageRampage Posts: 9,704 ✭✭✭✭✭
    Forgot to say, I really do like your error. Very nice coin.
  • Options
    zap1111zap1111 Posts: 1,298 ✭✭
    These are just crazy when you think about it. Cool.
    zap1111
    102 capped bust half dollars - 100 die marriages
    BHNC #198
  • Options
    ConnecticoinConnecticoin Posts: 13,278 ✭✭✭✭✭
  • Options
    GrumpyEdGrumpyEd Posts: 4,749 ✭✭✭
    I love that Kennedy. image

    The mint should be able to make any thickness of gold planchet. They start with bars and roll them to size so I never understood why all of a sudden they had to use a foreign supplier for the UHR.



    Ed
  • Options
    HTubbsHTubbs Posts: 4,138 ✭✭✭


    << <i>image >>



    Very true, hats off to you for quick thinking!
  • Options


    << <i>

    << <i>image >>



    Very true, hats off to you for quick thinking! >>



    It's not a coin though.
  • Options
    image
    image

    1967 dime on 75%copper, 25% nickle, 100% pure copper core.A 1/10 Balboa proof planchet.
    Mark Anderson
  • Options
    DorkGirlDorkGirl Posts: 9,994 ✭✭✭
    Panamanian proof sets in 1967 were silver, just like their US counterparts.
    Becky
  • Options
    Your correct.A Balboa is completely different.Both were produced in the U.S..For example the 10 centmos (Panimanian) and the1/10 Balboa.Both dimes.Still reading on it.It s strange but there where two forms of coinage going on.It has something to do with the locals and the digging of the Panama Canal.
    Mark Anderson
  • Options
    One other thing .in 1967 the U.S. was not produceing proof sets.Only Special mint sets on clad.In 1964 silver was done for the most part as far as U.S. coinage.This dime should be on U.S. clad.The edge of this dime is brown which indicates alot of copper.
    Mark Anderson
  • Options
    MsMorrisineMsMorrisine Posts: 40,333 ✭✭✭✭✭
    coinstudy needs to go into the profile page and turn on Private Messages.


    coinstudy -- why do you think this planchet is a "panama planchet" to the exclusion of all "usa planchets" ??? and what makes you think it is a "proof" panama planchet?
    Current maintainer of Stone's Master List of Favorite Websites // My BST transactions
  • Options
    goodmoney4badmoneygoodmoney4badmoney Posts: 1,331 ✭✭✭✭✭
    Since my almost 4 year old thread got bumped maybe I should post another one I have? image
  • Options
    MsMorrisineMsMorrisine Posts: 40,333 ✭✭✭✭✭


    << <i>Since my almost 4 year old thread got bumped maybe I should post another one I have? image >>




    go for it


    Current maintainer of Stone's Master List of Favorite Websites // My BST transactions
  • Options
    goodmoney4badmoneygoodmoney4badmoney Posts: 1,331 ✭✭✭✭✭
    I cropped the label a little too close on the right and only have the one side imaged apparently, but here we go....

    image
  • Options
    ctf_error_coinsctf_error_coins Posts: 15,433 ✭✭✭✭✭
    I have at least 4 on foreign planchets
  • Options
    RampageRampage Posts: 9,704 ✭✭✭✭✭
    Well, I don't have my pictures of my Kennedy, but here is this one I found on my PC.

    image


  • Options
    MsMorrisineMsMorrisine Posts: 40,333 ✭✭✭✭✭
    image



    unfortunately, coinstudy has a dime struck on a dime planchet and it's worth 10 cents.
    Current maintainer of Stone's Master List of Favorite Websites // My BST transactions
  • Options
    CaptHenwayCaptHenway Posts: 34,351 ✭✭✭✭✭


    << <i>
    unfortunately, coinstudy has a dime struck on a dime planchet and it's worth 10 cents. >>



    but he willl never accept that fact.....
    Professional Numismatist, Retired. 55 year member ANA. Former ANA Senior Authenticator. Winner of four ANA Heath Literary Awards; three Wayte and Olga Raymond Literary Awards; Numismatist of the Year Award 2009, and ANA Lifetime Achievement Award 2020. Winner of the PNG's 2026 Robert Friedberg Award for "The Enigmatic Lincoln Cents of 1922," Available now from Whitman or Amazon.
  • Options
    BroadstruckBroadstruck Posts: 30,497 ✭✭✭✭✭
    Only own one...

    image
    To Err Is Human.... To Collect Err's Is Just Too Much Darn Tootin Fun!
  • Options
    rxerrxer Posts: 280 ✭✭
    technically you didn't say it had to be an error so in that case most early half cents and
    large cent planchets where made in England- therefore: a US coin on a foreign planchet
    palmer
  • Options
    DorkGirlDorkGirl Posts: 9,994 ✭✭✭


    << <i>

    << <i>
    unfortunately, coinstudy has a dime struck on a dime planchet and it's worth 10 cents. >>



    but he willl never accept that fact..... >>


    Truth.
    Becky
  • Options
    http://books.google.com/books?id=Cwvl1ZseZW8C&pg=PA725&lpg=PA725&dq=1968+1/10+balboa+copper+proof&source=bl&ots=iQLKILvllu&sig=27RUle29z97Qif3D11Lf6jxxFdw&hl=en&sa=X&ei=1FtQUdWRLOr62QWQtIGwBA&ved=0CDMQ6AEwAA


    All I'm trying to say is the stock/planchet was intended for one above.Was left in the hopper or the machineing and recieved a U.S. strike.It most likely occurred in SanFrancisco. Panama provided their own stock.Its a Panamanian three layer clad composition. 75% copper, 25%nickle, bonded to a 100% copper core.It recieved in error a1967 U.S. strike.Its not that hard to grasp.
    Mark Anderson
  • Options
    O k this became really strange.Omar Torrijos Herrara Was Military leader of Panama from 1968-1981.Itis rumored that there was a proof set or cormemorative set in the works.In 1981Omars plane mysteriously crashed an the coin set was scuddled.When I began to read about people investigateing to deep into his death were turning up dead I stopped! It became to strange.
    Mark Anderson
  • Options
    I do accept that this dime is struck on a dime clad planchet.It is you that can not accept that there are Foriegn planchets of a different clad composition struck in U.S. mints.Ha, ha, ha,........it's only a dime right. It's worth ten cents.
    Mark Anderson
  • Options
    DorkGirlDorkGirl Posts: 9,994 ✭✭✭
    Send it to PCGS or NGC for attribution.
    Becky
  • Options
    seanqseanq Posts: 8,868 ✭✭✭✭✭


    << <i>Send it to PCGS or NGC for attribution. >>




    I'm sure it is far too valuable to send off to some person he doesn't know, I bet he won't even get the same coin back.


    Sean Reynolds
    Incomplete planchets wanted, especially Lincoln Cents & type coins.

    "Keep in mind that most of what passes as numismatic information is no more than tested opinion at best, and marketing blather at worst. However, I try to choose my words carefully, since I know that you guys are always watching." - Joe O'Connor
  • Options
    MFHMFH Posts: 11,720 ✭✭✭✭
    image
    Mike Hayes
    ~~~~~~~~~~~~
    Coin collecting is not a hobby, it's an obsession !

    New Barber Purchases
  • Options
    MsMorrisineMsMorrisine Posts: 40,333 ✭✭✭✭✭


    << <i>image



    unfortunately, coinstudy has a dime struck on a dime planchet and it's worth 10 cents. >>




    that's a picture of a confirmed foreign planchet error.
    Current maintainer of Stone's Master List of Favorite Websites // My BST transactions
  • Options
    MsMorrisineMsMorrisine Posts: 40,333 ✭✭✭✭✭
    coinstudy -- CaptHenway has decades of experience in the coin biz. He told you in the thread that went bye-bye that the specification for the panama 1/10 balboa and the usa clad dime are exactly the same.

    OK, if panama provides the coil, no big deal... they are obviously using the same supplier.


    The color was dealt with by the metal detecting member who indicated it was once buried.



    The only way anyone can pull a dime or a 1/10 balboa and say "possibly mistruck" as on:
    minterrornews.com/news-5-13-03-foreigners_in_the_mint.html

    is to have a brand new bank box of $500 or 500 balboa that is new and pure for one year only...
    you go through it looking at all the balboas or dime and you suddenly encounter a coin from the other country.
    and... this is very important to point out.... even on that page you provided ... here is what it says: """ on a U.S. or Panama 10c blank.35.0 grains """


    EVEN THEY CAN'T SAY IT IS 100% CERTAIN A FOREIGN PLANCHET BECAUSE THEY ARE IDENTICAL... ( one OR the other)


    and you have a special problem.... you pulled yours from change years after release.... it is now impossible for you to prove it is one planchet or the other.


    if you claim that 1967 is on a panama planchet, then anyone can claim the entire run in SF was done on panama planchets.

    Since there is no proof of anything....

    you have a dime on a dime planchet worth 10 cents.



    As far as the edge.... look at thousands of dimes and you will see a wide variation in the amount of "silver" vs. "orange"

    there are variations in the punching from coil process, the edge upset process, then the striking process. And I'm willing to guess that the layers even have some slight variations due to mechanical tolerances. The "s" vs. "o" varies. Look at thousands of dimes and you will see.



    PS -- turn on your Private Messages in the "Profile"
    Current maintainer of Stone's Master List of Favorite Websites // My BST transactions
  • Options
    MsMorrisineMsMorrisine Posts: 40,333 ✭✭✭✭✭
    oh... and ... YES ... it s remotely possible that it is struck on a panama 1/10 balboa planchet.

    since that is unverifiable....

    you got a dime on a us planchet worth 10c



    Walking around claiming it "could be" would have the same dis-attraction as walking around saying "under all these clothes we are all naked."

    yeah... "could be" but since you can't prove it then it just makes you seem loopy.




    incidentally.... do you have a caliper? can you measure the thickness of the Type i, type ii, the and the dime? You should see a growing thickness and the edge is brought up. It should start around +1mm and end around 1.35mm This would be the same thicknesses as for a proof or sms or business strike planchet. This is just showing more info about the type i and type ii planchets.
    Current maintainer of Stone's Master List of Favorite Websites // My BST transactions
  • Options
    Type2Type2 Posts: 13,985 ✭✭✭✭✭
    Only have one i found in a bag of Jeffersons.


    imageimage
    image


    Hoard the keys.
  • Options
    MsMorrisineMsMorrisine Posts: 40,333 ✭✭✭✭✭
  • Options
    I dont have a micrometer but the weight came in at 2.2 grams, just under 2.3.Looking at it with another 67 it has the same thickness and diameter.The obv and rev and reeding are brown.Much like a well tarnished copper penny.It's when I saw the 1/10 balboa proof "clad" composition of 75%copper, 25% nickle bonded to a 100% copper corethat really grabbed my attention.

    On the PDF document it shows that in 1967 1/10 Balboa proofs were struck in SanFrancisco. It's my understanding that all that was being produced as far as U.S. coinage in SanFrancisco is the Special mint set's.So chances are that this brown 1967 dime struck on a 1/10 Babloa proof clad plancet recieved a Special mint strike in error.What are the odds?

    suggest that others might go download that PDF document.It might help explain some of your oddities.I don't know everything.......I'm just studying.
    Mark Anderson
  • Options
    CaptHenwayCaptHenway Posts: 34,351 ✭✭✭✭✭


    << <i>I dont have a micrometer but the weight came in at 2.2 grams, just under 2.3.Looking at it with another 67 it has the same thickness and diameter.The obv and rev and reeding are brown.Much like a well tarnished copper penny.It's when I saw the 1/10 balboa proof "clad" composition of 75%copper, 25% nickle bonded to a 100% copper corethat really grabbed my attention.

    On the PDF document it shows that in 1967 1/10 Balboa proofs were struck in SanFrancisco. It's my understanding that all that was being produced as far as U.S. coinage in SanFrancisco is the Special mint set's.So chances are that this brown 1967 dime struck on a 1/10 Babloa proof clad plancet recieved a Special mint strike in error.What are the odds?

    suggest that others might go download that PDF document.It might help explain some of your oddities.I don't know everything.......I'm just studying. >>



    I'll try one more time.

    Panamanian 1/10 Balboa coins were struck on a clad composition of 75% copper, 25% nickel bonded to a 100% copper core.

    U.S. dimes were struck on a clad composition of 75% copper, 25% nickel bonded to a 100% copper core.

    There is no difference. Therefore, a 1967 U.S. dime struck on a clad composition of 75% copper, 25% nickel bonded to a 100% copper core is a normal U.S. dime. Were you under the impression that 1967 U.S. dimes were struck on some different composition? If so, please explain.
    Professional Numismatist, Retired. 55 year member ANA. Former ANA Senior Authenticator. Winner of four ANA Heath Literary Awards; three Wayte and Olga Raymond Literary Awards; Numismatist of the Year Award 2009, and ANA Lifetime Achievement Award 2020. Winner of the PNG's 2026 Robert Friedberg Award for "The Enigmatic Lincoln Cents of 1922," Available now from Whitman or Amazon.
  • Options
    Its new to me to.I never knew they produced foriegn coins in U.S. mints.


    http://minterrornews.com/news-5-13-03-foreigners_in_the_mint.html


    When I read this article I was facinated with the possibilities.In this article is a link to a pdf doc.It's a table showing country/nation, mint, date, denom, compo, mintage.It even shows weather the foriegner can be struck on u.s. stock.

    just found two more possibiities for my brown dime.

    1) 1967 phillipino 10 centimos. Minted SanFrancisco. Compo70% copper, 18% zinc, 12% nickle.Can be struck on u.s. stock.

    ) 1967 El Salvador 10 centavos.Minted Denver. Compo 70% copper, 25% nickle.Can not be struck on u.s. stock.

    This table is very helpful.Take care.
    Mark Anderson
  • Options
    ctf_error_coinsctf_error_coins Posts: 15,433 ✭✭✭✭✭
    Coinstudy, CaptHenway KNOWS what he is talking about, he is an valuable asset to these boards.

    I have and continue to learn a great deal from him.

  • Options
    I understand what you are saying.Why the brown obv and rev.Should I take a knife to it and srart scraping? If it's a paint job it's one hell of a good one! Its is showing silver color around the rim and do to a little ware.Actually its sad.If it is painted they ruined a good dime.In about 20 years the 1967 p dime will be a key date just because of the low mintage.If it's an Sms even lower mintage.

    What do you think start scrapping?.......it's just a dime! Ha, ha, ha
    Mark Anderson
  • Options
    DorkGirlDorkGirl Posts: 9,994 ✭✭✭
    Send it in.
    Becky
  • Options
    mrpotatoheaddmrpotatoheadd Posts: 7,576 ✭✭✭


    << <i>In about 20 years the 1967 p dime will be a key date just because of the low mintage. >>

    2 1/4 billion is a low mintage? Seems rather high to me.
  • Options
    How much would you guy's pay for a 1967 dime?
    Mark Anderson
  • Options
    DorkGirlDorkGirl Posts: 9,994 ✭✭✭
    I got one in change the other day.
    Becky
  • Options
    CaptHenwayCaptHenway Posts: 34,351 ✭✭✭✭✭


    << <i>How much would you guy's pay for a 1967 dime? >>



    It's just spending money. Looked in my pocket change just now and have a 1965 that I will just spend somewhere.
    Professional Numismatist, Retired. 55 year member ANA. Former ANA Senior Authenticator. Winner of four ANA Heath Literary Awards; three Wayte and Olga Raymond Literary Awards; Numismatist of the Year Award 2009, and ANA Lifetime Achievement Award 2020. Winner of the PNG's 2026 Robert Friedberg Award for "The Enigmatic Lincoln Cents of 1922," Available now from Whitman or Amazon.
  • Options
    MsMorrisineMsMorrisine Posts: 40,333 ✭✭✭✭✭
    coinstudy - on the previous thread you started... the one that went bye-bye ... a metal detector enthusiast said the coin looks exactly like ones he has dug up.


    Current maintainer of Stone's Master List of Favorite Websites // My BST transactions

Leave a Comment

BoldItalicStrikethroughOrdered listUnordered list
Emoji
Image
Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights
Drop image/file