Options
Post a US coin struck on a foreign planchet
goodmoney4badmoney
Posts: 1,331 ✭✭✭✭✭
Here's a 1968-D Kennedy Half struck on a Brazil 10 centavos planchet, composition of 75% copper / 25% nickel and weighs 5.7 grams. The US did not strike coins for Brazil, instead making only blank planchets.
Anyone care to post another US coin on a foreign planchet they own?

Anyone care to post another US coin on a foreign planchet they own?

0
Comments
<< <i>I have a 1974 Kennedy Half struck on a Taiwan $5 planchet, but no photos available. >>
I, too, have one. I used to have pictures of mine posted on here, but I've since removed them. It is in a PCGS MS63 holder and quite a coin. When I get back home this weekend, I will repost.
<< <i>where were these coins found? >>
Well, I bought mine maybe two years ago. It was in a group of two hundred very minor (die chip, some clips, grease,etc.) error coins. Anyway, I made a very fair offer and got the group. I then sent the coin to PCGS who authenticated it and graded it MS63.
The group I bought looked like it was assembled years and years ago. Nothing dated beyond 1975 or so. So, I have a feeling this particular error was found around the time of its release and was kept there. All the flips had the yellow age stains and rusted staples.
<< <i>
<< <i>where were these coins found? >>
Well, I bought mine maybe two years ago. It was in a group of two hundred very minor (die chip, some clips, grease,etc.) error coins. Anyway, I made a very fair offer and got the group. I then sent the coin to PCGS who authenticated it and graded it MS63.
The group I bought looked like it was assembled years and years ago. Nothing dated beyond 1975 or so. So, I have a feeling this particular error was found around the time of its release and was kept there. All the flips had the yellow age stains and rusted staples. >>
Nice pick up! I thought / hoped at least ONE other coin would be pictured, it would be great to see it.
102 capped bust half dollars - 100 die marriages
BHNC #198
The mint should be able to make any thickness of gold planchet. They start with bars and roll them to size so I never understood why all of a sudden they had to use a foreign supplier for the UHR.
<< <i>
Very true, hats off to you for quick thinking!
<< <i>
<< <i>
Very true, hats off to you for quick thinking! >>
It's not a coin though.
1967 dime on 75%copper, 25% nickle, 100% pure copper core.A 1/10 Balboa proof planchet.
coinstudy -- why do you think this planchet is a "panama planchet" to the exclusion of all "usa planchets" ??? and what makes you think it is a "proof" panama planchet?
<< <i>Since my almost 4 year old thread got bumped maybe I should post another one I have?
go for it
unfortunately, coinstudy has a dime struck on a dime planchet and it's worth 10 cents.
<< <i>
unfortunately, coinstudy has a dime struck on a dime planchet and it's worth 10 cents. >>
but he willl never accept that fact.....
large cent planchets where made in England- therefore: a US coin on a foreign planchet
<< <i>
<< <i>
unfortunately, coinstudy has a dime struck on a dime planchet and it's worth 10 cents. >>
but he willl never accept that fact..... >>
Truth.
Also interesting.
http://www.error-ref.com/unidentified-origin-and-purpose.html
And this.
http://books.google.com/books?id=tWVE-f7kXZIC&pg=PA159&lpg=PA159&dq=coins+struck+on+panama+planchets&source=bl&ots=3eF5boL_aL&sig=b7rV2H84Ja1qJ3zfalJVRlz6W-Y&hl=en&sa=X&ei=dFdKUdygIOugyAGy5IDQBg&ved=0CFMQ6AEwBw
I share what I find interesting.I tend to distance myself from smart asses and masters of anything.Masters place limits on themselves .I Dont have time for the ego.
All I'm trying to say is the stock/planchet was intended for one above.Was left in the hopper or the machineing and recieved a U.S. strike.It most likely occurred in SanFrancisco. Panama provided their own stock.Its a Panamanian three layer clad composition. 75% copper, 25%nickle, bonded to a 100% copper core.It recieved in error a1967 U.S. strike.Its not that hard to grasp.
<< <i>Send it to PCGS or NGC for attribution. >>
I'm sure it is far too valuable to send off to some person he doesn't know, I bet he won't even get the same coin back.
Sean Reynolds
"Keep in mind that most of what passes as numismatic information is no more than tested opinion at best, and marketing blather at worst. However, I try to choose my words carefully, since I know that you guys are always watching." - Joe O'Connor
~~~~~~~~~~~~
Coin collecting is not a hobby, it's an obsession !
New Barber Purchases
<< <i>
unfortunately, coinstudy has a dime struck on a dime planchet and it's worth 10 cents. >>
that's a picture of a confirmed foreign planchet error.
OK, if panama provides the coil, no big deal... they are obviously using the same supplier.
The color was dealt with by the metal detecting member who indicated it was once buried.
The only way anyone can pull a dime or a 1/10 balboa and say "possibly mistruck" as on:
minterrornews.com/news-5-13-03-foreigners_in_the_mint.html
is to have a brand new bank box of $500 or 500 balboa that is new and pure for one year only...
you go through it looking at all the balboas or dime and you suddenly encounter a coin from the other country.
and... this is very important to point out.... even on that page you provided ... here is what it says: """ on a U.S. or Panama 10c blank.35.0 grains """
EVEN THEY CAN'T SAY IT IS 100% CERTAIN A FOREIGN PLANCHET BECAUSE THEY ARE IDENTICAL... ( one OR the other)
and you have a special problem.... you pulled yours from change years after release.... it is now impossible for you to prove it is one planchet or the other.
if you claim that 1967 is on a panama planchet, then anyone can claim the entire run in SF was done on panama planchets.
Since there is no proof of anything....
you have a dime on a dime planchet worth 10 cents.
As far as the edge.... look at thousands of dimes and you will see a wide variation in the amount of "silver" vs. "orange"
there are variations in the punching from coil process, the edge upset process, then the striking process. And I'm willing to guess that the layers even have some slight variations due to mechanical tolerances. The "s" vs. "o" varies. Look at thousands of dimes and you will see.
PS -- turn on your Private Messages in the "Profile"
since that is unverifiable....
you got a dime on a us planchet worth 10c
Walking around claiming it "could be" would have the same dis-attraction as walking around saying "under all these clothes we are all naked."
yeah... "could be" but since you can't prove it then it just makes you seem loopy.
incidentally.... do you have a caliper? can you measure the thickness of the Type i, type ii, the and the dime? You should see a growing thickness and the edge is brought up. It should start around +1mm and end around 1.35mm This would be the same thicknesses as for a proof or sms or business strike planchet. This is just showing more info about the type i and type ii planchets.
Hoard the keys.
PCGS MS62 - Jefferson Nickel struck 70% off center on a 1/10 Balboa planchet
top left of page
On the PDF document it shows that in 1967 1/10 Balboa proofs were struck in SanFrancisco. It's my understanding that all that was being produced as far as U.S. coinage in SanFrancisco is the Special mint set's.So chances are that this brown 1967 dime struck on a 1/10 Babloa proof clad plancet recieved a Special mint strike in error.What are the odds?
suggest that others might go download that PDF document.It might help explain some of your oddities.I don't know everything.......I'm just studying.
<< <i>I dont have a micrometer but the weight came in at 2.2 grams, just under 2.3.Looking at it with another 67 it has the same thickness and diameter.The obv and rev and reeding are brown.Much like a well tarnished copper penny.It's when I saw the 1/10 balboa proof "clad" composition of 75%copper, 25% nickle bonded to a 100% copper corethat really grabbed my attention.
On the PDF document it shows that in 1967 1/10 Balboa proofs were struck in SanFrancisco. It's my understanding that all that was being produced as far as U.S. coinage in SanFrancisco is the Special mint set's.So chances are that this brown 1967 dime struck on a 1/10 Babloa proof clad plancet recieved a Special mint strike in error.What are the odds?
suggest that others might go download that PDF document.It might help explain some of your oddities.I don't know everything.......I'm just studying. >>
I'll try one more time.
Panamanian 1/10 Balboa coins were struck on a clad composition of 75% copper, 25% nickel bonded to a 100% copper core.
U.S. dimes were struck on a clad composition of 75% copper, 25% nickel bonded to a 100% copper core.
There is no difference. Therefore, a 1967 U.S. dime struck on a clad composition of 75% copper, 25% nickel bonded to a 100% copper core is a normal U.S. dime. Were you under the impression that 1967 U.S. dimes were struck on some different composition? If so, please explain.
http://minterrornews.com/news-5-13-03-foreigners_in_the_mint.html
When I read this article I was facinated with the possibilities.In this article is a link to a pdf doc.It's a table showing country/nation, mint, date, denom, compo, mintage.It even shows weather the foriegner can be struck on u.s. stock.
just found two more possibiities for my brown dime.
1) 1967 phillipino 10 centimos. Minted SanFrancisco. Compo70% copper, 18% zinc, 12% nickle.Can be struck on u.s. stock.
) 1967 El Salvador 10 centavos.Minted Denver. Compo 70% copper, 25% nickle.Can not be struck on u.s. stock.
This table is very helpful.Take care.
I have and continue to learn a great deal from him.
What do you think start scrapping?.......it's just a dime! Ha, ha, ha
<< <i>In about 20 years the 1967 p dime will be a key date just because of the low mintage. >>
2 1/4 billion is a low mintage? Seems rather high to me.
<< <i>How much would you guy's pay for a 1967 dime? >>
It's just spending money. Looked in my pocket change just now and have a 1965 that I will just spend somewhere.