I have to agree with Roadrunner. The Gas fiasco is making it a Btch to own classic cars without a lot of expense not incurred in the previous decade.
This crap ethanol gas is a killer to the classics. Unfortunately I live in an area where no real gas is near. I had a coupke of 88 Vette convertibles with low miles...1 to drive...had 18,000 miles on it when I sent her on her way, and a loaded out Z-51 with 5,000 miles on the clock. The Z-51 cost me a chunk a change due to the ethanol bullsh*t. That's when I decided to let it go and forgo classic cars.
I sold my, what I consider the baddest street sleeper a couple of years ago due to the upkeep and possible major costs envolved in ownership. It was an E-55 Benz. I bought the car before I researched it....when I did I made a beeline to the dealership the next day and bought the extended warranty...the only time I have ever done so in my life! I didn't experience any of the High 4-5 figure castastrophies during the 4 years I owned it but the warranty more than paid for itself!
<< <i>I love coins and cars. My nostalgia is in coins. My need for speed resides in a 997.1 Turbo that does sub 3 0-60 >>
Good thing you didn't go with a 996. Porsche guys will know why >>
Had one. The improvements in 07 were in the stratosphere -- outside, inside and under ... >>
Did you encounter the dreaded IMS failure? Many a 996s found their way to the scrap pile after that debacle.
I don't think any will take the place of the 993. The last true 911. >>
Derek, the IMS problem was only with the air cooled 996's. The Turbos have a different engine, the M-56(?) commonly referred to the Metzger engine after it's designer. The Metzger engine is a derivative of a Porsche racing engine and has a dry oil sump with an external oil reservoir. 996 Turbos are a great value because they do not have the IMS issue.
This is a picture of my 996 Turbo-S on Independence Pass in Colorado, which is a great road for the car.
Car collecting is very much different than coin collecting in one significant respect, though. If I enhance the look of a coin I will be considered a Coin Doctor. I have had a lot of fun upgrading the turbos, adding a Fabspeed exhaust and cats, upgraded injectors, a custom tune that is programmable and an enhanced air intake manifold, and have increased the HP from 450 to about 800 (with 100+ octane gas). So the car now has more power than a GT2, and they both have the same block. Cars do offer the opportunity for improvement whereas coins must remain totally original. Maintenance of a car is understood as a necessary evil, and coins seem to occupy a different universe.
1965 Falcon Convertible. 101 HP, 170 CID inline 6, 3 speed manual on the column, power steering, reverse lights. All stock except for a little head work.
It's so much fun to watch people's faces when they see you shift gears!!!
1965 Falcon Convertible. 101 HP, 170 CID inline 6, 3 speed manual on the column, power steering, reverse lights. All stock except for a little head work.
It's so much fun to watch people's faces when they see you shift gears!!! >>
This Falcon brings back memories,,,,,, when I was real young, perhaps 7 - 10 yrs old my grandfather had Falcons. I can remember 3 or 4 sitting around at all times. One quit running he would buy another and scrounge parts off the retired cars whenever he could.
Coins, cars and Guns, all three take a chuck of the income. Outgrew the 4 car garage and built a shop in 2014, decided I needed a car lift and found one, needed 2 more gun safes upstairs, added another safe for the coins while I was at it. The incedenatals really add up at times. My wife blames it on not having a lot growing up and I am making up for lost time.
Mark NGC registry V-Nickel proof #6!!!! working on proof shield nickels # 8 with a bullet!!!!
1965 Falcon Convertible. 101 HP, 170 CID inline 6, 3 speed manual on the column, power steering, reverse lights. All stock except for a little head work.
It's so much fun to watch people's faces when they see you shift gears!!! >>
I know what you mean, I had a 1964 Ford Ranchero with three-on-the-tree. I also had a 1963 1/2 Ford Falcon Convertible 260 V8 with four-on-the-floor. The one I really miss is my 1946 Ford Woody Super Deluxe with a flathead V8.
Had this for 14+ years, not going anywhere and has been driven all of 3000 miles in the past 4-5 years. Doors off therapy works wonders. Was my daily driver for about 9 years.
For my day-to-day commuting purposes I roll a hemi.
This year I need to work on my seated and CBH roll projects.
I got cars out of my system quite a few years ago, thank goodness. But it took about a dozen various 1960s Corvettes and convertibles to get there.
I'm now a dyed-in-the-wool fan of high reliability and low upkeep. My company car is a 1998 Ford F-150 pickup with 250,000 miles that I picked out as a demo and has always been amazingly well behaved, and my wife has a 2007 Honda Accord. I want to buy the truck when I retire.
Comments
<< <i>
<< <i>I love coins and cars. My nostalgia is in coins. My need for speed resides in a 997.1 Turbo that does sub 3 0-60 >>
Good thing you didn't go with a 996. Porsche guys will know why >>
Had one. The improvements in 07 were in the stratosphere -- outside, inside and under ...
<< <i>
<< <i>
<< <i>I love coins and cars. My nostalgia is in coins. My need for speed resides in a 997.1 Turbo that does sub 3 0-60 >>
Good thing you didn't go with a 996. Porsche guys will know why >>
Had one. The improvements in 07 were in the stratosphere -- outside, inside and under ... >>
Did you encounter the dreaded IMS failure? Many a 996s found their way to the scrap pile after that debacle.
I don't think any will take the place of the 993. The last true 911.
EAC 6024
This crap ethanol gas is a killer to the classics. Unfortunately I live in an area where no real gas is near. I had a coupke of 88 Vette convertibles with low miles...1 to drive...had 18,000 miles on it when I sent her on her way, and a loaded out Z-51 with 5,000 miles on the clock. The Z-51 cost me a chunk a change due to the ethanol bullsh*t. That's when I decided to let it go and forgo classic cars.
I sold my, what I consider the baddest street sleeper a couple of years ago due to the upkeep and possible major costs envolved in ownership. It was an E-55 Benz. I bought the car before I researched it....when I did I made a beeline to the dealership the next day and bought the extended warranty...the only time I have ever done so in my life! I didn't experience any of the High 4-5 figure castastrophies during the 4 years I owned it but the warranty more than paid for itself!
Now I drive a VW so I can buy more coins!
See http://www.doubledimes.com for a free online reference for US twenty-cent pieces
<< <i>I want my '62 Corvette back and yes, I would sell coins to get it. >>
My favorite post so far.
<< <i>
<< <i>
<< <i>
<< <i>I love coins and cars. My nostalgia is in coins. My need for speed resides in a 997.1 Turbo that does sub 3 0-60 >>
Good thing you didn't go with a 996. Porsche guys will know why >>
Had one. The improvements in 07 were in the stratosphere -- outside, inside and under ... >>
Did you encounter the dreaded IMS failure? Many a 996s found their way to the scrap pile after that debacle.
I don't think any will take the place of the 993. The last true 911. >>
Derek, the IMS problem was only with the air cooled 996's. The Turbos have a different engine, the M-56(?) commonly referred to the Metzger engine after it's designer. The Metzger engine is a derivative of a Porsche racing engine and has a dry oil sump with an external oil reservoir. 996 Turbos are a great value because they do not have the IMS issue.
This is a picture of my 996 Turbo-S on Independence Pass in Colorado, which is a great road for the car.
Car collecting is very much different than coin collecting in one significant respect, though. If I enhance the look of a coin I will be considered a Coin Doctor. I have had a lot of fun upgrading the turbos, adding a Fabspeed exhaust and cats, upgraded injectors, a custom tune that is programmable and an enhanced air intake manifold, and have increased the HP from 450 to about 800 (with 100+ octane gas). So the car now has more power than a GT2, and they both have the same block. Cars do offer the opportunity for improvement whereas coins must remain totally original. Maintenance of a car is understood as a necessary evil, and coins seem to occupy a different universe.
So call me a Car Doctor........
OINK
<< <i>I've got several cars, but this one I've had the longest. Going on 25 years now.
1972 El Camino SS-454 (a real one)
>>
Nice, bet it is a real torque monster.
1965 Falcon Convertible. 101 HP, 170 CID inline 6, 3 speed manual on the column, power steering, reverse lights. All stock except for a little head work.
It's so much fun to watch people's faces when they see you shift gears!!!
Wayne
www.waynedriskillminiatures.com
Menomonee Falls Wisconsin USA
http://www.pcgs.com/SetRegistr...dset.aspx?s=68269&ac=1">Musky 1861 Mint Set
<< <i>
1965 Falcon Convertible. 101 HP, 170 CID inline 6, 3 speed manual on the column, power steering, reverse lights. All stock except for a little head work.
It's so much fun to watch people's faces when they see you shift gears!!! >>
----------------------------------------------------------------------------------------
This Falcon brings back memories,,,,,, when I was real young, perhaps 7 - 10 yrs old my grandfather had Falcons. I can remember 3 or 4 sitting around at all times. One quit running he would buy another and scrounge parts off the retired cars whenever he could.
GrandAm
NGC registry V-Nickel proof #6!!!!
working on proof shield nickels # 8 with a bullet!!!!
RIP "BEAR"
<< <i>
1965 Falcon Convertible. 101 HP, 170 CID inline 6, 3 speed manual on the column, power steering, reverse lights. All stock except for a little head work.
It's so much fun to watch people's faces when they see you shift gears!!! >>
I know what you mean, I had a 1964 Ford Ranchero with three-on-the-tree. I also had a 1963 1/2 Ford Falcon Convertible 260 V8 with four-on-the-floor. The one I really miss is my 1946 Ford Woody Super Deluxe with a flathead V8.
For my day-to-day commuting purposes I roll a hemi.
This year I need to work on my seated and CBH roll projects.
<< <i>My 1958 Land Rover Series II. >>
way cool, i always liked these .
<< <i>
<< <i>I've got several cars, but this one I've had the longest. Going on 25 years now.
1972 El Camino SS-454 (a real one)
>>
Nice, bet it is a real torque monster. >>
Thanks, yes it is Original LS5 454, TH-400 (shifter on the console), 3:31 positraction. Also has A/C, in-dash tachometer & gauges, power door locks.
Here is another one I have:
I'm now a dyed-in-the-wool fan of high reliability and low upkeep. My company car is a 1998 Ford F-150 pickup with 250,000 miles that I picked out as a demo and has always been amazingly well behaved, and my wife has a 2007 Honda Accord. I want to buy the truck when I retire.
<< <i>
<< <i>You make an interesting point....no one has been killed by their coin >>
Unless they choked on one. >>
Or accidentally drank the cleaning solution.