SMR 1975 O-PEE-CHEE Johnny Bench BVG 9.5

vezinaautowanted

Hi, what is the smr of a 1975 O-PEE-CHEE Johnny Bench BVG 9.5? Greatly appreciated.

slantycouch

No pricing on CardPricer or VintageCardPrices for that card.

Boopotts

Hard to say, but be advised that it's very, very likely that the card is a sheet cut.

If I had to guess I'd say that card would sell on an average day for $800

vezinaautowanted

I saw that a psa 10 topps sold for around $1,800 but this is opc and a gem mint. I heard that there are no gem mint psa 10 opc cards.

Boopotts

<< <i>I saw that a psa 10 topps sold for around $1,800 but this is opc and a gem mint. I heard that there are no gem mint psa 10 opc cards. >>



And there's a very good reason for that.

As a rule, be very leery of OPC's that land in a BVG 9.5 holder. Unless, of course, you don't mind sheet cuts. Some guys don't care, and that's perfectly fine, but if you tend to lean away from sheet cuts this is (probably) not the card for you.

vezinaautowanted

whats the value if its a sheet cut and if it isn't sheet cut?

grote15

I heard that there are no gem mint psa 10 opc cards.

That is incorrect. I've personally submitted two 1975 OPC cards that came back PSA 10, and two other 1973 OPC cards that came back PSA 10, too. All four cards were pulled from wax packs.

jimq112

<< <i>I heard that there are no gem mint psa 10 opc cards.

That is incorrect. I've personally submitted two 1975 OPC cards that came back PSA 10, and two other 1973 OPC cards that came back PSA 10, too. All four cards were pulled from wax packs. >>





I think he meant no 75 munson opc in psa 10. He had another thread asking for SMR and POP.

vezinaautowanted

did you guys sell your psa 10's?

vezinaautowanted

how much do you think I can get for it if it isn't sheet cut because the person I bought it from believes it is not a sheet cut.

WinPitcher

Put it on ebay and see, what confuses me is you are asking for the PSA SMR price for a Beckett graded card.

Steve

mikeschmidt

From my experience with 1970s OPC cards in high-grade BVG holders, I would think that there is an extremely high likelihood that it is sheet cut.

M

MBMiller25

<< <i>how much do you think I can get for it if it isn't sheet cut because the person I bought it from believes it is not a sheet cut. >>




With your ebay feedback and history, I wouldnt pay you $10 for that card.

digicat

<< <i>With your ebay feedback and history, I wouldnt pay you $10 for that card. >>



offend him not.

mickeymantle24

I would put it on the bay and let it go. The best bidders in the world are the unsure ones

vezinaautowanted

maybe i'll get it regraded by psa.

mikeschmidt

<< <i>maybe i'll get it regraded by psa. >>



If you send it in the BVG holder on a crossover form, and PSA crosses it to PSA 9 or PSA 10, I'll give you ten bucks.

vezinaautowanted

if it grades a psa 10 that would be a 2k card

swartz1

How did you make out selling that Brooks?

Was the buyer happy with it?

rbdjr1

I had a few OPCs in BVG holders, I'd say most of them were sheet cut!

Here's the only old scan I could find:

vezinaautowanted

has anyone though crossovered a bvg 9.5 opc and got a psa 10 grade?

jimq112

<< <i>has anyone though crossovered a bvg 9.5 opc and got a psa 10 grade? >>



Listen to the advice you're being given. The Bench is most probably a sheet cut. PSA would never cross a BVG 9.5 to a 10 and would look very carefully at a BVG 9.5 OPC card. The cut is so different between a wire cut card and a knife or laser cut card that it would have no chance to cross.

Boopotts

<< <i>if it grades a psa 10 that would be a 2k card >>




In that case I think you should completely ignore the helpful advice that everyone here has tried to offer you and try to get the card in a PSA 10 holder. NOTE- your chances of success will increase significantly if you crack the card out of the current holder before submitting.

Good luck!

digicat

How'd the 2nd sale of your fake Brooks Robinson card go? You got NARU'ed shortly after it's sale, so I'm guessing it didn't go well.

vezinaautowanted

So if i crack it out and submit it to psa it will greatly increase its chances of crossing over. Whta if I put down min grade of 10?

swartz1

it will receive an authentic...

CDsNuts

I'd like to summarize this whole thread:

vezina: What's a BVG 9.5 '75 OPC Bench worth
cu board: Not sure but it's almost certainly sheet cut.
vezina: What's it worth in PSA 10?
cu board: There's a reason it's in a BVG holder. PSA doesn't grade sheet cut cards.
vezina: I think I'll send it to PSA and get it in a 10 holder.

MBMiller25

<< <i>So if i crack it out and submit it to psa it will greatly increase its chances of crossing over. Whta if I put down min grade of 10? >>



Dude, Are you freaking dense? You're a crook. You tried to sell a fake/trimmed Brooks Robinson RC on these boards and when you did sell it on ebay you were NARU'd. You advertised a PSA 10 Kobe Bryant RC while using a RAW picture of the card,yet your description said you would be getting a PSA 10 slabbed Kobe Bryant Topps Chrome card, and sure enough, you got negged because you sent the buyer a RAW bryant card.

Noone wants to help you out, and even when they do, you don't want to listen to what anyone is saying. Get your a$$ off these boards, The good people are sick and freaking tired of crooks like you. You're a freaking BUM!

Edit: SP

swartz1

no need to summarize that post...pretty straight forward and direct...

Boopotts

<< <i>I'd like to summarize this whole thread:

vezina: What's a BVG 9.5 '75 OPC Bench worth
cu board: Not sure but it's almost certainly sheet cut.
vezina: What's it worth in PSA 10?
cu board: There's a reason it's in a BVG holder. PSA doesn't grade sheet cut cards.
vezina: I think I'll send it to PSA and get it in a 10 holder. >>



It's a charming variation of a CU staple, which is the 'guess the grade' threads. These usually go as follows"

OP: "What do you think this card would grade?"
CU Poster 1: "Probably a seven, there appears to be snow on the surface."
OP:"Yeah, that's my scanner."
CU Poster 2: "Probably a 7, the upper right corner looks soft."
OP: "Yeah, but it looks OK in person."
CU Poster 3: "Probably a 7, the registration looks off."
OP: "Yeah, I need to adjust the resolution on my scanner. So, any other opinions?"

goraiders

<< <i>

<< <i>So if i crack it out and submit it to psa it will greatly increase its chances of crossing over. Whta if I put down min grade of 10? >>



Dude, Are you freaking dense? You're a crook. You tried to sell a fake/trimmed Brooks Robinson RC on these boards and when you did sell it on ebay you were NARU'd. You advertised a PSA 10 Kobe Bryant RC while using a RAW picture of the card,yet your description said you would be getting a PSA 10 slabbed Kobe Bryant Topps Chrome card, and sure enough, you got negged because you sent the buyer a RAW bryant card.

Noone wants to help you out, and even when they do, you don't want to listen to what anyone is saying. Get your a$$ off these boards, The good people are sick and freaking tired of crooks like you. You're a freaking BUM!

Edit: SP >>



What he said.

bman90278

Don't forget guys what Carol said today...She will ban members without warning if anyone crosses the line.

brian

bcwcardz

what is the difference between bvg and bgs?Does that mean if i send in a vintage card it gets a bvg holder? I thought bvg was more lenient and had different grading scales.

MBMiller25

BVG stands for Beckett Vintage Grading
BGS stands for Beckett Grading Service

BVG is for cards pre 1980 and does not come with sub grades for centering, corners, edges and surface.

BGS graded cards do have subgrades for the four categories above.

Hope that helps.