Home› U.S. Coin Forum
Options

Error or PMD?

JeffMTampaJeffMTampa Posts: 3,323 ✭✭✭✭✭
edited July 13, 2020 11:12AM in U.S. Coin Forum

I recently purchased an 1899 Barber Dime in a NGC AU 58 holder:


On initial inspection it looks like nicely toned coin. But looking around there's some odd stuff going on. The obverse has 3 imperfections that look to me like errors:

There's an area across the face that looks like it's struck though grease:

An area on the chin that looks like a lamination:

A Die Chip at the base of the ribbon:

And a Die crack from the rim to the bust with what appears to be a retained CUD:

So far interesting, but the reverse gets odder. There are several areas of raised metal only on the raised areas of the coin; none in the field:



There's also a rim ding on the reverse.

What is this on the reverse? Is it retained cuds from the minting process, or was metal added to the coin after striking? If metal was added I'm surprised it's in a straight grade holder.

Thoughts on this coin?

I love them Barber Halves.....

Comments

  • Options
    LanceNewmanOCCLanceNewmanOCC Posts: 19,999 ✭✭✭✭✭
    edited July 13, 2020 11:11AM

    a LOT going on with this coin.

    1. radial die crack tip of bust
    2. PMD from eye through cap
    3. possibly a planchet flaw on chin
    4. die chips and PMD on the rev
    5. really nice die chip end of ribbon - edited to add

    that said imo, it isn't a terrible coin but well below average.

    <--- look what's behind the mask! - cool link 1/NO ~ 2/NNP ~ 3/NNC ~ 4/CF ~ 5/PG ~ 6/Cert ~ 7/NGC 7a/NGC pop~ 8/NGCF ~ 9/HA archives ~ 10/PM ~ 11/NM ~ 12/ANACS cert ~ 13/ANACS pop - report fakes 1/ACEF ~ report fakes/thefts 1/NCIS - Numi-Classes SS ~ Bass ~ Transcribed Docs NNP - clashed coins - error training - V V mm styles -

  • Options
    keyman64keyman64 Posts: 15,650 ✭✭✭✭✭

    Nice photos. Wow, that coin has "issues." :o

    "If it's not fun, it's not worth it." - KeyMan64
    Not really looking for much these days but if I were, it might be a toner. :smile:
  • Options
    JBKJBK Posts: 17,989 ✭✭✭✭✭
    edited July 13, 2020 9:21AM

    I think the OP picked up most of the issues, except I think "cud" is being used improperly. I see a die crack and since due chips but no cuds.

    I am no expert but I a little surprised that rim ding was not an issue. Same goes for the obverse scuffs if they are not struck thru grease.

  • Options
    seanqseanq Posts: 8,869 ✭✭✭✭✭

    To quote a popular meme in answer to your question - why not both? Here is my accounting of what you noted in the pictures:

    Minor errors: Die crack on the base of the bust, minor lamination on the face, internal die chips on the reverse

    PMD: deep gouge on the cap, reverse rim

    I am honestly a little surprised it straight graded, to me either of the areas of PMD would call for a net grade.

    Sean Reynolds

    Incomplete planchets wanted, especially Lincoln Cents & type coins.

    "Keep in mind that most of what passes as numismatic information is no more than tested opinion at best, and marketing blather at worst. However, I try to choose my words carefully, since I know that you guys are always watching." - Joe O'Connor
  • Options
    tincuptincup Posts: 5,487 ✭✭✭✭✭

    Nice die crack and toning, but the areas of post mint damage are distracting.

    ----- kj
  • Options
    JimnightJimnight Posts: 10,845 ✭✭✭✭✭

    As above.

  • Options
    JeffMTampaJeffMTampa Posts: 3,323 ✭✭✭✭✭

    @JBK said:
    I think the OP picked up most of the issues, except I think "cud" is being used improperly. I see a die crack and since due chips but no cuds.

    Yes, I improperly referred to the Die Chips as CUDS. I was so dumbfounded when I found all these problems that my mind blew a gasket.

    I love them Barber Halves.....
  • Options
    rickoricko Posts: 98,721 ✭✭✭✭✭

    Interesting coin with the die chips and crack....The PMD and rim ding hurt the coin....I hope your 'gasket' is repairable :D;)
    Cheers, RickO

  • Options
    goldengolden Posts: 10,590 ✭✭✭✭✭

    That coin should not have straight graded.

  • Options
    JeffMTampaJeffMTampa Posts: 3,323 ✭✭✭✭✭
    edited July 13, 2020 12:53PM

    To me the real question is the "die chips" on the obverse and reverse Are these really die chips? Possibly silver solder added? If they are die chips how did so many form with only 1 die crack on the obverse? On the reverse why are the die chips only in the raised area of the coin?

    I agree that it shouldn't have straight graded (for the rim ding), but I'll have to say that all the stuff going on, it has given me hours of entertainment! Is there an award for the most errors occurring on a coin?

    I'm tempted to send it to our hosts for crossover to see what happens.....

    I love them Barber Halves.....
  • Options
    JBKJBK Posts: 17,989 ✭✭✭✭✭

    @JeffMTampa said:

    I'm tempted to send it to our hosts for crossover to see what happens.....

    I'm not sure that would end well. :#

  • Options
    LanceNewmanOCCLanceNewmanOCC Posts: 19,999 ✭✭✭✭✭

    @JeffMTampa said:
    If they are die chips how did so many form with only 1 die crack on the obverse? On the reverse >why are the die chips only in the raised area of the coin?

    a good point. if you look at enough seated liberty type coins, you will see a lot of chips/breaks on the high point of the coins: ie wreath. i think lincolns to an extent as well.

    based on the radial break and big die chip obv, i'd say it is nearly 100% the ones on the reverse, in this case, are legit.

    <--- look what's behind the mask! - cool link 1/NO ~ 2/NNP ~ 3/NNC ~ 4/CF ~ 5/PG ~ 6/Cert ~ 7/NGC 7a/NGC pop~ 8/NGCF ~ 9/HA archives ~ 10/PM ~ 11/NM ~ 12/ANACS cert ~ 13/ANACS pop - report fakes 1/ACEF ~ report fakes/thefts 1/NCIS - Numi-Classes SS ~ Bass ~ Transcribed Docs NNP - clashed coins - error training - V V mm styles -

  • Options
    JeffMTampaJeffMTampa Posts: 3,323 ✭✭✭✭✭

    @FredWeinberg will you please honor me with an opinion? This is a very odd coin.....

    I love them Barber Halves.....
  • Options
    FredWeinbergFredWeinberg Posts: 6,058 ✭✭✭✭✭

    I agree with Sean Q for both the die chips and damage- however I’m not certain that the chin has a lamination - could possibly be a hit or a scuff Mark

    Retired Collector & Dealer in Major Mint Error Coins & Currency since the 1960's.Co-Author of Whitman's "100 Greatest U.S. Mint Error Coins", and the Error Coin Encyclopedia, Vols., III & IV. Retired Authenticator for Major Mint Errors for PCGS. A 50+ Year PNG Member.A full-time numismatist since 1972, retired in 2022.
  • Options
    BLUEJAYWAYBLUEJAYWAY Posts: 11,974 ✭✭✭✭✭

    The did chips are reminiscent of the ones you see on the Lincoln Cent reverse on the wheat ears. Mainly on the 50's dates. I agree with all comments, but for the chin lamination. On the fence there.

    Successful transactions:Tookybandit. "Everyone is equal, some are more equal than others".
  • Options
    JeffMTampaJeffMTampa Posts: 3,323 ✭✭✭✭✭

    Thanks for all the thoughts and replies- what a team!

    Now to figure out what to do with this.

    I love them Barber Halves.....

Leave a Comment

BoldItalicStrikethroughOrdered listUnordered list
Emoji
Image
Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights
Drop image/file