Fred and Mike have some. Al might have some, too, as may Rich, but I have not checked the last two websites in quite some time. I like IKE errors also, but they are always so expensive, but that is to be expected for what they are.
Do you own the one you posted? Cool coin. I've got an off center, and some other minor stuff, but that's about it.
<< <i>Fred and Mike have some. Al might have some, too, as may Rich, but I have not checked the last two websites in quite some time. I like IKE errors also, but they are always so expensive, but that is to be expected for what they are.
Do you own the one you posted? Cool coin. I've got an off center, and some other minor stuff, but that's about it. >>
No, I don't own that one, it sold for over $6000 at Heritage a year or so ago. They almost never come up on eBay.
<< <i>Fred and Mike have some. Al might have some, too, as may Rich, but I have not checked the last two websites in quite some time. I like IKE errors also, but they are always so expensive, but that is to be expected for what they are.
Do you own the one you posted? Cool coin. I've got an off center, and some other minor stuff, but that's about it. >>
No, I don't own that one, it sold for over $6000 at Heritage a year or so ago. They almost never come up on eBay. >>
Most of the double strikes I see do not have that large of a spread, so the price is about what I would expect (I think).
I have some (PCGS unless noted). Among my holdings are:
1971 $1 USA MS63 (3% Clip) 1971-D Ike MS65 Misaligned Obv Die 1972 Ike Clipped ANACS MS60 1972-D $1 USA MS62 (1% Clip) 1972-D Ike NGC MS64 MAD 1974-D Ike Clipped Raw BU 1974-D 5% Clip Ike MS65 1976-D Ike MS62 (Tilted Partial Collar) 1977-D Ike 3% Clip MS65 1978-D 5% Off Center MS66 Ike 1978-D $1 USA MS65 (7% Clip)
Fantastic Ike errors (like the one you show), are very few and far between. There are a few collectors that have been actively seeking the outstanding Ike errors for years, and grabbing them whenever and where-ever they can, with no intention of re-selling them any time soon. So, I guess you could say that many of the "outstanding" ones are held in pretty "strong" hands and very rarely come out to play. For instance......
And this one....Of the 2 dozen or so known 74-D Silvers, there are at least (2) of them that are also struck from the same abraded, clashed die being a "Peg Leg", "Talon Head", "Clipped E" Variety.
It takes a LOT to pry one of these out of an error Ike-lover's hands!!!
I also have a 20+ coin PCGS Ike Error Set in the PCGS Registry under showcase/errors
I guess mine are minor league errors next to these others.... but I really like both the 5% off center in 66, and the 7% clip in 65. The first I bought for no more money than a normal MS66 of that date would cost, the other I bought raw off e-bay and slabbed myself.
Registry's Ike is sweet! Sometimes you get just the right amount of planchet rotation on an in-collar DS that results in a strike that seems to come alive.
Ike Dollar major mechanical Dramaic Errors are scarce because of the size of the coin - Double Strikes, etc. would have been easy to see by the press operators, and also because even back in the 70's, there was a very active collecting base for errors, and there were at least a half-dozen collectors specializing in them.
The Dr. A.K. Berry Collection of Ike Errors is now at the ANA in Colorado Springs - the best collection of them at the time, and probably even now.
When any dramatic Ike's appear, there are still a good number of serious collectors who will vie for them.
Minor Off Centers - up to about 10%, and Clips, up to about 20% or so, are fairly easy to find today - some types are still scarcer than you would think - such as Clad Layers Missing.
Retired Collector & Dealer in Major Mint Error Coins & Currency since the 1960's.Co-Author of Whitman's "100 Greatest U.S. Mint Error Coins", and the Error Coin Encyclopedia, Vols., III & IV. Retired Authenticator for Major Mint Errors for PCGS. A 50+ Year PNG Member.A full-time numismatist since 1972, retired in 2022.
Ikes are known struck on Cents, Nickels, Dimes, Quarters, and Half Dollar planchets, as well as Phillipine 1 Piso Planchets, Aluminum planchets, odd planchets, etc.....just like other denominations and types....
Retired Collector & Dealer in Major Mint Error Coins & Currency since the 1960's.Co-Author of Whitman's "100 Greatest U.S. Mint Error Coins", and the Error Coin Encyclopedia, Vols., III & IV. Retired Authenticator for Major Mint Errors for PCGS. A 50+ Year PNG Member.A full-time numismatist since 1972, retired in 2022.
<< <i>Hey Mr Weinberg Or Mr Lee have there been any IKES struck on wrong sized plancets like a quarter or Half. That would be cool to see. >>
Forum Member gandyjai has a nice set of error's ATS which has an ND IKE struck on a Kennedy Planchet and a 1972-D Struck on a Phillipine 1 Piso planchet. He also has a nice PCGS Showcase Set!
The man has been collecting high grade IKE's along wih nice unusual IKE's for a long, long time!
I decided to change calling the bathroom the John and renamed it the Jim. I feel so much better saying I went to the Jim this morning.
90% stuck through obverse.....I used to own it.....
Have to agree with Fred on the missing Clad layers. I think I went 7 years before I finally even SAW one!
GrandAm and Lee,...thanks for the compliments but..... There are guys out there that have Ike error sets that just BLOW mine away! I know, because I have had to sell them some of my best ones to make ends meet, now that I have 2 little girls to raise. While I have enjoyed collecting Ike errors for the past several years, I enjoy providing for, and spending time with my kids even more!
I'll still hang onto what I can, but until they are out of daycare, it's going to be TIGHT and I'm going to have to let a few of my extras go. I would LOVE to see the set at the ANA that Fred mentioned. I wonder if they could fix it so that one could view it on-line?
Speaking of error's, does anybody else have a problem with this one?
Perhaps I misunderstand minting processes but I was always under the assumbption that the strike would be weakest near the clip boundaries. This coin does not display any weakness at all.
I decided to change calling the bathroom the John and renamed it the Jim. I feel so much better saying I went to the Jim this morning.
<< <i>Speaking of error's, does anybody else have a problem with this one?
Perhaps I misunderstand minting processes but I was always under the assumbption that the strike would be weakest near the clip boundaries. This coin does not display any weakness at all. >>
Anybody?
I decided to change calling the bathroom the John and renamed it the Jim. I feel so much better saying I went to the Jim this morning.
But I guess I don't fully understand the mechanics in that the edges show no fading or blending at all. I would expect the edges to be less well formed.
I decided to change calling the bathroom the John and renamed it the Jim. I feel so much better saying I went to the Jim this morning.
<< <i>Ikes are known struck on Cents, Nickels, Dimes, Quarters, and Half Dollar planchets, as well as Phillipine 1 Piso Planchets, Aluminum planchets, odd planchets, etc.....just like other denominations and types.... >>
They are also known struck on two denominations at once (can you say "employee mischief?")
Well that 61% clip is nice Anyone remember that raw capped die Ike that when up on ebay a year or so ago? Man I should of gone for that, it went for way less than I figured it would.
I've picked a few off over the years. A 22% clip and a laminate error come to mind.
Comments
Do you own the one you posted? Cool coin. I've got an off center, and some other minor stuff, but that's about it.
<< <i>Fred and Mike have some. Al might have some, too, as may Rich, but I have not checked the last two websites in quite some time. I like IKE errors also, but they are always so expensive, but that is to be expected for what they are.
Do you own the one you posted? Cool coin. I've got an off center, and some other minor stuff, but that's about it. >>
No, I don't own that one, it sold for over $6000 at Heritage a year or so ago. They almost never come up on eBay.
<< <i>
<< <i>Fred and Mike have some. Al might have some, too, as may Rich, but I have not checked the last two websites in quite some time. I like IKE errors also, but they are always so expensive, but that is to be expected for what they are.
Do you own the one you posted? Cool coin. I've got an off center, and some other minor stuff, but that's about it. >>
No, I don't own that one, it sold for over $6000 at Heritage a year or so ago. They almost never come up on eBay. >>
Most of the double strikes I see do not have that large of a spread, so the price is about what I would expect (I think).
1971 $1 USA MS63 (3% Clip)
1971-D Ike MS65 Misaligned Obv Die
1972 Ike Clipped ANACS MS60
1972-D $1 USA MS62 (1% Clip)
1972-D Ike NGC MS64 MAD
1974-D Ike Clipped Raw BU
1974-D 5% Clip Ike MS65
1976-D Ike MS62 (Tilted Partial Collar)
1977-D Ike 3% Clip MS65
1978-D 5% Off Center MS66 Ike
1978-D $1 USA MS65 (7% Clip)
Ike Specialist
Finest Toned Ike I've Ever Seen, been looking since 1986
few collectors that have been actively seeking the outstanding Ike errors for years, and grabbing
them whenever and where-ever they can, with no intention of re-selling them any time soon.
So, I guess you could say that many of the "outstanding" ones are held in pretty "strong" hands
and very rarely come out to play.
For instance......
And this one....Of the 2 dozen or so known 74-D Silvers, there are at least (2) of them that are
also struck from the same abraded, clashed die being a "Peg Leg", "Talon Head", "Clipped E" Variety.
It takes a LOT to pry one of these out of an error Ike-lover's hands!!!
I also have a 20+ coin PCGS Ike Error Set in the PCGS Registry under showcase/errors
Brian
I Love
For the latest on Ike news, go here!
that one makes me dizzy....way cool!!!
Ike Specialist
Finest Toned Ike I've Ever Seen, been looking since 1986
I guess mine are minor league errors next to these others.... but I really like both the 5% off center in 66, and the 7% clip in 65. The first I bought for no more money than a normal MS66 of that date would cost, the other I bought raw off e-bay and slabbed myself.
To get one anywhere near the same price as a "regular" Ike is quite a feat!!
Registrycoin....you're KILLING me!
Brian
<< <i>Where are all the Ike errors? >>
I think Gandyjai has most of them
GrandAm
That's why I love this place. I learn something new (or see something new) every day.
Thanks guys...
"Bongo hurtles along the rain soaked highway of life on underinflated bald retread tires."
~Wayne
Unfortunately, those big guns will have to wait until I can get some lottery winnings to play with!
The name is LEE!
scarce because of the size of the coin - Double
Strikes, etc. would have been easy to see by
the press operators, and also because even
back in the 70's, there was a very active collecting
base for errors, and there were at least a half-dozen
collectors specializing in them.
The Dr. A.K. Berry Collection of Ike Errors is now at
the ANA in Colorado Springs - the best collection of them
at the time, and probably even now.
When any dramatic Ike's appear, there are still a good
number of serious collectors who will vie for them.
Minor Off Centers - up to about 10%, and Clips, up to about
20% or so, are fairly easy to find today - some types are
still scarcer than you would think - such as Clad Layers Missing.
<< <i>
I recall posting this example in a tread when it was available for sale on a site.
NGC has this designated as double struck... this looks multi or at least triple struck in collar to me
<< <i>
<< <i>
I recall posting this example in a tread when it was available for sale on a site.
NGC has this designated as double struck... this looks multi or at least triple struck in collar to me
I was thinking the same thing. However, its just an illusion. Here's a quick overlay with the second image rotated 27 degrees CCW:
The name is LEE!
Dollar planchets, as well as Phillipine 1 Piso Planchets, Aluminum
planchets, odd planchets, etc.....just like other denominations and types....
<< <i>Hey Mr Weinberg Or Mr Lee have there been any IKES struck on wrong sized plancets like a quarter or Half. That would be cool to see. >>
Pic robbed from JMSCoins Website Link
<< <i>Hey Mr Weinberg Or Mr Lee have there been any IKES struck on wrong sized plancets like a quarter or Half. That would be cool to see. >>
Forum Member gandyjai has a nice set of error's ATS which has an ND IKE struck on a Kennedy Planchet and a 1972-D Struck on a Phillipine 1 Piso planchet. He also has a nice PCGS Showcase Set!
The man has been collecting high grade IKE's along wih nice unusual IKE's for a long, long time!
The name is LEE!
<< <i>
<< <i>
<< <i>
I recall posting this example in a tread when it was available for sale on a site.
NGC has this designated as double struck... this looks multi or at least triple struck in collar to me
I was thinking the same thing. However, its just an illusion. Here's a quick overlay with the second image rotated 27 degrees CCW:
Thanx 19Lyds... Neat-o overlay!!!
Have to agree with Fred on the missing Clad layers. I think I went 7 years before I finally
even SAW one!
GrandAm and Lee,...thanks for the compliments but.....
There are guys out there that have Ike error sets that just BLOW mine away!
I know, because I have had to sell them some of my best ones to make ends meet, now
that I have 2 little girls to raise. While I have enjoyed collecting Ike errors for the past
several years, I enjoy providing for, and spending time with my kids even more!
I'll still hang onto what I can, but until they are out of daycare, it's going to be TIGHT and
I'm going to have to let a few of my extras go. I would LOVE to see the set at the ANA that Fred mentioned. I wonder if they could fix it so that one could view it on-line?
Brian
Here they Are!
And they got bidders too!
The name is LEE!
Perhaps I misunderstand minting processes but I was always under the assumbption that the strike would be weakest near the clip boundaries. This coin does not display any weakness at all.
The name is LEE!
<< <i>Speaking of error's, does anybody else have a problem with this one?
Perhaps I misunderstand minting processes but I was always under the assumbption that the strike would be weakest near the clip boundaries. This coin does not display any weakness at all. >>
Anybody?
The name is LEE!
But I guess I don't fully understand the mechanics in that the edges show no fading or blending at all. I would expect the edges to be less well formed.
The name is LEE!
<< <i>I wonder how PCGS determined the percentage of clip at 61%? >>
Perhaps they weigh them?
<< <i>Ikes are known struck on Cents, Nickels, Dimes, Quarters, and Half
Dollar planchets, as well as Phillipine 1 Piso Planchets, Aluminum
planchets, odd planchets, etc.....just like other denominations and types.... >>
They are also known struck on two denominations at once (can you say "employee mischief?")
Anyone remember that raw capped die Ike that when up on ebay a year or so ago? Man I should of gone for that, it went for way less than I figured it would.
I've picked a few off over the years. A 22% clip and a laminate error come to mind.
<< <i>I wonder how PCGS determined the percentage of clip at 61%? >>
Percentages are determined by weight.
Each coin is weighed and the total weight is divided by what it should weigh to determine how much is left. The missing percentage is the clip amount.
Its not always accurate but close to within 1 or 2%.
For example, if the clip occurs where there is no lettering ( or build up of metal) near the edge, then the percentages appear less.
Likewise, if the clip passes through an area of the coin which has a lot of metal (Like the top of IKEs Head), then the percentages appear higher.
The name is LEE!