Options
Combined Flip Basics.
I have spent the last hour researching old threads about flips and here are my conclusions.. (PS- let me know if I am wrong please)
• NO PVC! Short-term, long-term, it is NOT acceptable!
• Do not use the poly bag inserts. They cause hazing on proofs.
• Russ says "ET Kointainer SAFLIPS. Accept no substitute."
• Russ also says "Stiff is good. Soft is bad."
You can purchase online from either of these two highly suggested (by various people) sellers:
Brent Kreuger or JP's
Now, it is time for my questions..
• What does an insert look like? I have never seen one before, I dont know how they work, what they do or anything..
• Does an insert go on the inside or outside of the flip?
• What IS an insert used for?
• NO PVC! Short-term, long-term, it is NOT acceptable!
• Do not use the poly bag inserts. They cause hazing on proofs.
• Russ says "ET Kointainer SAFLIPS. Accept no substitute."
• Russ also says "Stiff is good. Soft is bad."
You can purchase online from either of these two highly suggested (by various people) sellers:
Brent Kreuger or JP's
Now, it is time for my questions..
• What does an insert look like? I have never seen one before, I dont know how they work, what they do or anything..
• Does an insert go on the inside or outside of the flip?
• What IS an insert used for?
0
Comments
Also, what happens when your flip only has 1 pocket and the other side is solid? What is that about?
And another dumb question.. What is the difference of a SaFlip and a Saf-T-flip?
<< <i>So really, if one wanted to save money, they could just use paper in the other half of the flip?
Also, what happens when your flip only has 1 pocket and the other side is solid? What is that about? >>
You could use paper, although some of the inserts are designed to be inert/acid free so as to not damage the coin. The one pocket flips are probably meant for TPG submissions, although I've never been able to figure that out either....
<< <i>Forget the flips and use Kointains. If you must, you can put the Kointain in a flip
Coin's for sale/trade.
Tom Pilitowski
US Rare Coin Investments
800-624-1870
Coin's for sale/trade.
Tom Pilitowski
US Rare Coin Investments
800-624-1870
I buy my flips from Jake's Marketplace. They cost around $50 per thousand and are perfect for what I do.
Two good-to-knows about flips...
1. Some come in "pages" that you have to tear apart. I find these to be extremely annoying. The flips I buy are pre-separated.
2. Many flips have squared-off edges. Some of the better ones have rounded edges. Believe me, the rounded edges will save your day if you're placing them into 20 pocket pages. The square end flips are a pain in the butt.
The Lincoln cent store:
http://www.lincolncent.com
My numismatic art work:
http://www.cdaughtrey.com
USAF veteran, 1986-1996 :: support our troops - the American way.
and it sets us apart from practitioners and consultants. Gregor
<< <i>• Do not use the poly bag inserts. They cause hazing on proofs. >>
Perhaps this is true for modern proofs (I still have not seen any direct cause and effect evidence other than "I know it's true"). Remeber that some proofs haze because of poor conditions before you received the coin. Poly bags (e.g. ANCO brand) inside paper envelopes (or non-PVC flips) work just fine for many coins.
<< <i>• NO PVC! Short-term, long-term, it is NOT acceptable! >>
Dealers and auction houses will continue to use these because they are cheap, easier to handle, and they expect the buyer to store them appropriately. However, purchasers sometimes do not do this. At headquarters, we just took a look at some "investment" grade coins from the early 1980's (from a very well-known firm) that were kept in a bank vault in sealed PVC flips held in a PVC album. One of the commems was so green that I initially thought it was just toning. Interestingly, around one of the other coins you could actually see the stages of how the flip was degrading. Our hearts went out to him as his purchase price was in the five figures back then!
<< <i>• Russ says "ET Kointainer SAFLIPS. Accept no substitute." >>
Exept that SAFLIPS will tone some coins at the leading edge of the coin at the "bottom" of the flip. I had several Gallery Mint Museum dollar patterns that were placed in new SAFLIPS that developed a small, but noticable and distracting, crescent shaped toning. ET Cointainer had no explanation. This was, however, the only time I have noticed a change in surface chemistry from SAFLIPS, then again I own very few brass coins.
With any flip, hold it up to the light then bend and twist it. You will likely see a tiny rainbow move around inside the flip. That is a fluid (lubricant) film inside the flip. That is touching your coins.
All that said, SAFLIPS are probably the best plastic flip on the market, just be prepared if you like to play with your coins that the brittle plastic will crack and break . . . so be careful.
The copper folks have a great solution. Use untreated cotton inserts inside paper envelopes or non-PVC slips. Decades of experience without surface damage to coins. These are sorta like flannel pajamas for your coins. They ain't cheap and they are a bit difficult to find, but the most compulsive, geeky, fastideous collectors swear by them!
<< <i>• Russ also says "Stiff is good. Soft is bad." >>
Good rule of thumb.
There is another non-PVC flip I have used when passing around coins that is a little thicker and does not have sharp edges and will not break with handling. I believe they are called "Stanton Flips" (although I have only seen that notation once). Here is a link to one vendor who carries these flips. I have not used these long-term so I do not know what they are like with time. A great advantage they have is that the corners are rounded.
Lane
See http://www.doubledimes.com for a free online reference for US twenty-cent pieces
My EBay Store/Auctions