Options
why I love the 1916 standing liberty quarter
Of course, it is possible that a 1916 Standing Liberty quarter can go down in value, like any coin, but this particular issue has so much going for it. It is the first year of a beautiful and popular series and has an extremely low mintage. Despite this, not as many high grade samples were saved as once thought. Furthermore, no other minting facilities, San Francisco or Denver produced this date. There is something special about that. This date, along with the initial 1917's is in the Type one category. I believe, however, that the 1916 alone should really be a separate type since it is significantly different from the 1917 type one variety. The hair, shield, gown and overall softness of hub detail give the look of a different design. Compare an unc. 1916 and unc.1917 type one and note the obvious differences. I suspect that many collectors already consider it a subtype in the series. If it ever does become its own type, what do you think will happen to the values then? Yes, other coins are rarer at every grade level, like the 1901-s Barber quarter, but think about this: Currently, a vg 1901-s Barber quarter is valued at about the same price as an XF 1916 Standing Liberty. For me, an XF Standing Liberty is the obvious choice. I am sure many would disagree, but the 1916 is so much more captivating and interesting, so much so, that its appeal reaches beyond the date and mintmark collector. I know that the 52,000 mintage figure does not directly relate to survival rates but it is nice to know that a circulating coin has a such a low, finite mintage. With the exception of the St. Gaudens gold coins, the 1916 Standing Liberty quarter is THE 20th century key.
1
Comments
I would say the Barber Quarter would be the key if a VG Barber Quarter and an XF SL Quarter have the same value, which looks rarier.....
I have 1 1927 Quarter in VG condition and I am content with that.....
IMHO, It's the "headlights", man!
First of all, welcome aboard!
Second of all, PLEASEEEEEE...... the 1901-S quarter is THE 20th century key (and the price reflects this!)
Dave
Nonetheless, owning a nice 1916 SL quarter is a great goal.
Tyler
BTW, if you could have only 1 coin to own, would it be the AU 1901-s or an AU 1916 SLQ? I imagine most would prefer the 01-S based on scarcity alone…
Dave
the SLQ is one of the four designs that I want to own complete sets of
the others are the Peace Dollar, the WLH and the Merc
Please check out my eBay auctions!
My WLH Short Set Registry Collection
And how did you determine this again? I'm lost.
Dave
Is the 01-S overpriced when compared to the 16-P. Now that’s a good question… My feeling is their are many 16-Ps rattling around, especially in UNC, since it was a first year issue. Similar situation with the 16-D Mercury dime.
Dave
Although, I have to disagree. I think the 1916SLQ has far too many specimens and is often way high priced for the population.
-Daniel
-Aristotle
Dum loquimur fugerit invida aetas. Carpe diem quam minimum credula postero.
-Horace
Apropos of the coin posse/aka caca: "The longer he spoke of his honor, the tighter I held to my purse."
I'm enjoying your thread, especially since you're getting the blood flowing with some of my fellow Barber collectors.
Connor Numismatics Website
I simply can't afford to put together a nice looking set of these quarters, same would be true for walking liberty halves.....
This is also why I like Barber coinage.....
Thats a complement form me because I don't collect quarters.
Eric
First of all, I like the 1916 SLQ, great design, first year coin, and a lower mintage coin from an extremely popular series. However, this coin is not rare by any standards. This coin is available in any grade on any given day, it just takes capital to buy one. Look at the population numbers compared to many other quarters. This coin has gone up so much in the last 18 months, that the market is currrently oversaturated with them.(way more than enough to satisfy the demand, and that is part of the reason why so many are always for sale) I saw so many 1916 SLQ's in St Louis in all grades from Good-Ms-65, that I lost count at over 50. IMO, the price is too high currently and with the exception of the "very nicest coins for the grade", I can see some potential correction coming on them down the road. Someone here locally has at least 20 hoarded!!!
jim
It is nice to know there are many passionate barber collectors out there. I like them too, as I once had a complete collection of Barber half dollars. It was so frustrating finding a no problem matching set of fines that I gave up. You Barber collectors really have your work cut out for you. Original, attractive, fine or better complete sets of Barbers are a prize for sure. But for me, standing liberty quarters look even better as a complete set. With the exception of the 1916, it is possible to complete it without going overboard in price. A nice set of xf-au with maybe the tougher dates in sharp vf looks real nice. There is only one overdate and it is a relatively short series. The beautiful and intricate details, design changes and strike characteristics clearly make this my favorite series.
When I say SLQs are collected on a much wider basis, I am including Type collectors. While some feel Barbers are underappreciated, that reduces the demand for "key" coins and the market reflects it. Being married to an economist, I believe in efficient markets and this is one of those instances. It is not a value judgement on the merits of either coin, it is just based on data, which in the end determines the pricing.
Dave
The first year of any coin is saved in quantities, regardless of the actual mintage. The first year of this design was slipped into general circulation along with the 1917 Ty 1's. However many people saved the new design as a novelty, without realizing that the 1916 was the actual rarer coin.
The 1901-S Barber was put into circulation immediately and there wasn't anything special about it, just another issue of Barber quarters from the San Fransisco mint. The 1900-S disappeared quickly into the channels of commerce, as did the 01-S and also the 02-S. What surprised collectors later on in the late 1900's was that the actual mintage of the 01-S was so low. By that time, most 01-S's had seen years of service and few were saved in MS. The 1913-S on the other hand had a smaller mintage than the 01-S but it was saved almost from the moment of issue as it was recognized as a mintage-rarity.
I have yet to find one 1901-S choice enough to call AU 55-58. They are just not available. At this very moment I can buy a 1916 SLQ in a PCGS AU 55 holder on ebay on a BIN with Ira S.
I wish I could say the same thing for the 01-S quarter.
Veryfine: Welcome to the US Forum.
~~~~~~~~~~~~
Coin collecting is not a hobby, it's an obsession !
New Barber Purchases
One more try...
The price of the 1916-P quarter is high because it's an extremely popular series, and date collectors need a 1916 example. There are many many SLQ collectors, my friend. The 1916-P is not expensive because it’s ultra-rare. Nice 1916-Ps are readily available in almost any grade.
Similarly, Mercury dimes are heavily collected, and therefore 1916-D dimes are expensive. They are not rare either. Pick any grade you want, and you can buy one this week.
Indian cents are heavily collected. The 1877 in Mint State is pricey. But I can locate 6 or 7 for sale by the end of the week if you're interested. No problem.
Barber material, and Seated material for that matter, is not popular. But even given this less than stellar popularity, key Barbers are very pricey, because they are not available in any numbers. As a test, go looking for an original XF 01-S, or an AU 97-S. How about a 14-S in XF?
Bottom line: Don't let this bother you, as the SLQ is easily one of the top three coin designs in my opinion. A truly classic design. But that doesn't make them rare, when compared to some other heavy-weights. It makes them great collector coins!
Dave
I should add just this one thing to my statement, the Standing Liberty Quarter is also my favorite coin. The run up on prices on the 1916 can be most recently traced to the beginning of last year, and I have noticed that there has been some reluctance to these new prices as many dealers have had 1916 examples in their inventory for quite some time now. I strongly feel that the 1916 has maxed itself out, for the time being anyway.
Recent auction results have proved somewhat lack luster on this coin, as many gem examples have remained unsold. Check out Heritage's "End of Auction" offerings.
Collecting the SLQ has been a passion of mine for decades, and my set is always under revision. I wouldn't trade this set for anyother that I can think of, it means that much to me.
However, I would trade my better 1916 ( PCGS MS 63FH ) for a 1901-S in PCGS AU 58 in a heart beat. I know I can locate another example within a few minutes. The demand for the 01-S is there but the supply is not (aside for a slew of AG3 to G8 coins).
Granted there are more SLQ collectors than Barber collectors, and the demand from the larger amount of SLQ collectors has kept the price up for alot of these coins. I know, I'm one of them. Yet, Barber collectors - as few as they are, or at least seem to be- have put a great deal of pressure on key dates ( as Dave mentioned) . Those who can afford gem MS coins of either series know all too well there are others who covet the same coins they want to add to their collection. The "registry game" has fed this competition.
Again I have to say that I don't think there is a more beautiful coin than the SLQ. Yet I fear a correction in pricing on the 1916 is in order; the demand for this date is extremely strong, but not at its current price levels. ( I certainly don't want the price to slide but I think its really inevidentable.)
~~~~~~~~~~~~
Coin collecting is not a hobby, it's an obsession !
New Barber Purchases
The one stumbling block, as you realize, to the Barber quarters is the 01-S. As you mentioned, why would anyone attempt to start this series, knowing that the 01-S is almost impossible to locate ? That's a very good question, I wish I could answer it with just one simple statement, but I can't.
I started collecting Barber Liberty Head Nickels first, then graduating to Dimes, and a few years later to the quarters, and finally to the halves. Knowing that I may never locate a 01-S quarter (or half dollar for that matter in AU 58) hasn't deterred me from at least trying. I guess that's what collecting is all about..."the thrill of the hunt".
When an AU 55-58 Barber coin I need for my collection is unavailable, I have been forced to acquire a MS example; this has been the case of my Barber halves, as I now have a 01-S in MS 63 and just this week located a gem 05-O in MS 65. It very well may never come to pass that I add a MS 01-S quarter.
Shifting to SLQ's, the stumbling block for that series has been locating a true FH example of the overdate and the 27-S. I feel that the 27-S in FH is harder to locate than a MS 01-S and its sold at multiples of what a 01-S would bring. With regard to the 1916 FH's, these coins should be in a seperate type unto themselves. They are now lumped with the 1917 Ty 1's ( which usually have incredible FH's) and it does an injustice to the 1916.
Interesting thread, thanks for starting it.
~~~~~~~~~~~~
Coin collecting is not a hobby, it's an obsession !
New Barber Purchases
I would note that I am working on a VG set of Halves right now, with a VG Quarter set to be started in the near future and then further expanding to Dimes (grade is not determined yet)..... Not sure what to do with the 3 keys either in the quarter set.....
With all that said it has been determined that the 1916 quarter is needed for a more popular set, which is true, it is needed for a date set which the 1901-S is not & with those two points the 1916 is still much more available and cheaper, althought still to expensive for me
Mintages - Key Dates
Dave
First year issues, because of the design change, are always saved in some numbers. That's the case with the 16-P.
Dave
In your mind, I bet this is very true!
Dave
PS Great thread. I wish the majority of the threads on this board were half as interesting...
<< <i>I stated earlier that the 1916 slq is THE 20th century key based on overall desirability; date set collectors, type collectors and to a certain extent, non-collectors. It is also a comment mixed with my emotions and personal aesthetics. As you can see from all the responses, the 1901-s Bq is rarer and more pricey but it doesn't seem to have the same fame or star-power that the 1916 slq does. >>
If this is your basis I would say that the key would be neither coin but the 1916-D Mercury Dime or the 1909-S VDB Cent..... Might have to toss in the 1955 DD as well.....
Great coins but the 16-d is a date/mintmark rarity and the 55 dd is a mint error. The 16 slq is its own unique type, significantly different from the 17 type ones. However, I love the 16-d dime too. Who in the world doesn't want one?
<< <i>If this is your basis I would say that the key would be neither coin but the 1916-D Mercury Dime or the 1909-S VDB Cent..... Might have to toss in the 1955 DD as well..... Text >>
Sorry, I meant to quote your response and reply with:
Great coins but the 16-d is a date/mintmark rarity and the 55 dd is a mint error. The 16 slq is its own unique type, significantly different from the 17 type ones. However, I love the 16-d dime. Who in the world doesn't want one?
Something else that is reasonable to figure that if you are talking about the coins being referenced it is possible/likely you are into gold to some degree and then you are into another animal of keys.....