if you scrub a silver coin with baking soda (or any mild abrasive) it will temporarily remove tarnish and "shine it up" but will destroy any luster, remove original protective patina, leave swirly hairlines, make it dull and "cleaned looking". Try it on a junk silver coin. Copper too. it ain't good, my friend. A good exercise to learn what it looks like and not to buy coins that look like that.
in the olden days, they didn't know any better. they would also "erase" spots with a pencil eraser.
if you scrub a silver coin with baking soda (or any mild abrasive) it will temporarily remove tarnish and "shine it up" but will destroy any luster, remove original protective patina, leave swirly hairlines, make it dull and "cleaned looking". Try it on a junk silver coin.
NOT THAT I HAVE DONE THIS TO A COIN, but I have polished my silverware by putting it on a piece of aluminum foil that has a layer of baking soda on it, then pouring hot water over it. It gets rid of the tarnish without scrubbing the silver. What would that do to a coin? No abrasion, but would it take off the luster? I don't dare try it on a coin.
<< <i>NOT THAT I HAVE DONE THIS TO A COIN, but I have polished my silverware by putting it on a piece of aluminum foil that has a layer of baking soda on it, then pouring hot water over it. It gets rid of the tarnish without scrubbing the silver. What would that do to a coin? No abrasion, but would it take off the luster? I don't dare try it on a coin. >>
I think yes - I once attended an ANA sponsered seminar at an major coin show and the speaker demostrated this technique - As I remember it has something to do with positive & negative ions (electrolysis - like in a battery) causing the "toning" ions to move from one place to another - I think the best description would be that it strips the toning from the coins by electrolysis. During this process, it could "etch" the coin's surface because if too much of whatever's there is taken off, you have different surface metal charateristics left.
Some of our chemists on the forum can probably better explain this
If you're going to try it on coins, use common bullion value silver coins for your testing - don't start with that gem 1893-S Morgan
Collecting eye-appealing Proof and MS Indian Head Cents, 1858 Flying Eagle and IHC patterns and beautiful toned coins.
“It ain't what you don't know that gets you into trouble. It's what you know for sure that just ain't so.” Mark Twain Newmismatist
If the coin is uncirculated with light toning, light light, then it would work.
but for a circulated coin, you know, like a VF walker or barber coin, they get that sticky black toning that's mixed with sweat and dust and lint and is kinda gummy?
if one of the unknowing wants to "shine 'er up" it'll take some friction, and the old silverware on the foil with the electrolyte trick won't work.
steel wool might be a little harsh, but a soft cloth and silver polish was real common back then.
i own that 1. there are several other old "coin cleaning manuals" available, too. if you ever read old redbooks, even they describe how to clean coins.
Comments
Whzzzzzzzzz
bad things!
if you scrub a silver coin with baking soda (or any mild abrasive) it will temporarily remove tarnish and "shine it up" but will destroy any luster, remove original protective patina, leave swirly hairlines, make it dull and "cleaned looking". Try it on a junk silver coin. Copper too. it ain't good, my friend.
A good exercise to learn what it looks like and not to buy coins that look like that.
in the olden days, they didn't know any better. they would also "erase" spots with a pencil eraser.
Liberty: Parent of Science & Industry
<< <i>What does baking soda do to a coin? >>
BODY BAG from PCGS!!!
NOT THAT I HAVE DONE THIS TO A COIN, but I have polished my silverware by putting it on a piece of aluminum foil that has a layer of baking soda on it, then pouring hot water over it. It gets rid of the tarnish without scrubbing the silver. What would that do to a coin? No abrasion, but would it take off the luster? I don't dare try it on a coin.
Anne
<< <i>NOT THAT I HAVE DONE THIS TO A COIN, but I have polished my silverware by putting it on a piece of aluminum foil that has a layer of baking soda on it, then pouring hot water over it. It gets rid of the tarnish without scrubbing the silver. What would that do to a coin? No abrasion, but would it take off the luster? I don't dare try it on a coin. >>
I think yes - I once attended an ANA sponsered seminar at an major coin show and the speaker demostrated this technique - As I remember it has something to do with positive & negative ions (electrolysis - like in a battery) causing the "toning" ions to move from one place to another - I think the best description would be that it strips the toning from the coins by electrolysis. During this process, it could "etch" the coin's surface because if too much of whatever's there is taken off, you have different surface metal charateristics left.
Some of our chemists on the forum can probably better explain this
If you're going to try it on coins, use common bullion value silver coins for your testing - don't start with that gem 1893-S Morgan
“It ain't what you don't know that gets you into trouble. It's what you know for sure that just ain't so.” Mark Twain
Newmismatist
but for a circulated coin, you know, like a VF walker or barber coin, they get that sticky black toning that's mixed with sweat and dust and lint and is kinda gummy?
if one of the unknowing wants to "shine 'er up" it'll take some friction, and the old silverware on the foil with the electrolyte trick won't work.
steel wool might be a little harsh, but a soft cloth and silver polish was real common back then.
Liberty: Parent of Science & Industry
<< <i>I'll answer any questions about the book after I've recieved it and had a chance to read it. I bid on it and won....Ken >>
Will you be bringing it to Baltimore Dec 6 (Saturday)?
Charles, you'll get a kick out of this.
K S
Liberty: Parent of Science & Industry