Home U.S. Coin Forum

1966 Kennedy -Shield Strike

Here’s a kool 1 for you all. Advice if errors like this are worth grading or eBay as is. That’s even if it’s an error. No mint mark.








Comments

  • Aspie_RoccoAspie_Rocco Posts: 3,696 ✭✭✭✭✭

    Looks like incuse marks, damage from another coin’s Reeded edge hitting that area most likely.
    Not an error, just post mint damage.

  • CregCreg Posts: 858 ✭✭✭✭✭

    Welcome. Nah, that coin won’t light up anyone here. Look around and see what is cool.

  • @Aspie_Rocco said:
    Looks like incuse marks, damage from another coin’s Reeded edge hitting that area most likely.
    Not an error, just post mint damage.

    I tried lining it up with another coin with the shield over the crease and the rim/edge of the coin wouldn’t allow it to lay flush.

  • Aspie_RoccoAspie_Rocco Posts: 3,696 ✭✭✭✭✭

    I do not comprehend what you are saying. I also see nothing of note in the shield area.
    If you take a nice uncirculated half and smack the edge reeds onto another half in a flat area…viola
    You can see reed hits on larger coins like halves and large dollar coins if you look at enough of them.
    I suspect these types of hits happen at the mint, in bags, or when dropped into a roll or tube.

  • @Creg said:
    Welcome. Nah, that coin won’t light up anyone here. Look around and see what is cool.

    Tough crowd! Good thing I am looking to light up anyone. In this community to share and learn. But thanks for chiming in, your input is valued.

  • @Aspie_Rocco said:
    I do not comprehend what you are saying. I also see nothing of note in the shield area.
    If you take a nice uncirculated half and smack the edge reeds onto another half in a flat area…viola
    You can see reed hits on larger coins like halves and large dollar coins if you look at enough of them.
    I suspect these types of hits happen at the mint, in bags, or when dropped into a roll or tube.

    I pretty much overlaid another Kennedy over that area to see if it would make contact. But that makes sense. Thanks for the info.

  • jmlanzafjmlanzaf Posts: 36,735 ✭✭✭✭✭

    @Monchis1679 said:

    @Aspie_Rocco said:
    I do not comprehend what you are saying. I also see nothing of note in the shield area.
    If you take a nice uncirculated half and smack the edge reeds onto another half in a flat area…viola
    You can see reed hits on larger coins like halves and large dollar coins if you look at enough of them.
    I suspect these types of hits happen at the mint, in bags, or when dropped into a roll or tube.

    I pretty much overlaid another Kennedy over that area to see if it would make contact. But that makes sense. Thanks for the info.

    99.999% of all anomalies on coins are damage. There are a limited number of ways that an actual mint error or variety can be made.

    Respectfully, you are approaching this backwards. Don't look at coins and find anomalies which you then try to categorize. Look at real, certified errors and study the coin references and then the actual errors will jump out at you.

    Try error-ref.com or varietyvista.com

  • CregCreg Posts: 858 ✭✭✭✭✭

    @Monchis1679 said:

    @Creg said:
    Welcome. Nah, that coin won’t light up anyone here. Look around and see what is cool.

    Tough crowd! Good thing I am looking to light up anyone. In this community to share and learn. But thanks for chiming in, your input is valued.

    —members exhausted by poor reasearch. The meager inchiming was a powerful signal for the crowd not to post memes.

  • @jmlanzaf said:

    I do not comprehend what you are saying. I also see nothing of note in the shield area.
    If you take a nice uncirculated half and smack the edge reeds onto another half in a flat area…viola
    You can see reed hits on larger coins like halves and large dollar coins if you look at enough of them.
    I suspect these types of hits happen at the mint, in bags, or when dropped into a roll or tube.

    I pretty much overlaid another Kennedy over that area to see if it would make contact. But that makes sense. Thanks for the info.

    99.999% of all anomalies on coins are damage. There are a limited number of ways that an actual mint error or variety can be made.

    Respectfully, you are approaching this backwards. Don't look at coins and find anomalies which you then try to categorize. Look at real, certified errors and study the coin references and then the actual errors will jump out at you.

    Try error-ref.com or varietyvista.com

    I appreciate that JM!! Probably the best advice I received. Thank you.

  • robecrobec Posts: 6,864 ✭✭✭✭✭

    @Monchis1679 said:

    @jmlanzaf said:

    I do not comprehend what you are saying. I also see nothing of note in the shield area.
    If you take a nice uncirculated half and smack the edge reeds onto another half in a flat area…viola
    You can see reed hits on larger coins like halves and large dollar coins if you look at enough of them.
    I suspect these types of hits happen at the mint, in bags, or when dropped into a roll or tube.

    I pretty much overlaid another Kennedy over that area to see if it would make contact. But that makes sense. Thanks for the info.

    99.999% of all anomalies on coins are damage. There are a limited number of ways that an actual mint error or variety can be made.

    Respectfully, you are approaching this backwards. Don't look at coins and find anomalies which you then try to categorize. Look at real, certified errors and study the coin references and then the actual errors will jump out at you.

    Try error-ref.com or varietyvista.com

    I appreciate that JM!! Probably the best advice I received. Thank you.

    BTW, no US coin had a mint mark in 1965-67.

  • Morgan WhiteMorgan White Posts: 9,163 ✭✭✭✭✭

    @Monchis1679 said:

    @jmlanzaf said:

    I do not comprehend what you are saying. I also see nothing of note in the shield area.
    If you take a nice uncirculated half and smack the edge reeds onto another half in a flat area…viola
    You can see reed hits on larger coins like halves and large dollar coins if you look at enough of them.
    I suspect these types of hits happen at the mint, in bags, or when dropped into a roll or tube.

    I pretty much overlaid another Kennedy over that area to see if it would make contact. But that makes sense. Thanks for the info.

    99.999% of all anomalies on coins are damage. There are a limited number of ways that an actual mint error or variety can be made.

    Respectfully, you are approaching this backwards. Don't look at coins and find anomalies which you then try to categorize. Look at real, certified errors and study the coin references and then the actual errors will jump out at you.

    Try error-ref.com or varietyvista.com

    I appreciate that JM!! Probably the best advice I received. Thank you.

    We call him Lanza. Also, it's ok to disagree with him. He likes that.

  • jmlanzafjmlanzaf Posts: 36,735 ✭✭✭✭✭

    @Morgan White said:

    @Monchis1679 said:

    @jmlanzaf said:

    I do not comprehend what you are saying. I also see nothing of note in the shield area.
    If you take a nice uncirculated half and smack the edge reeds onto another half in a flat area…viola
    You can see reed hits on larger coins like halves and large dollar coins if you look at enough of them.
    I suspect these types of hits happen at the mint, in bags, or when dropped into a roll or tube.

    I pretty much overlaid another Kennedy over that area to see if it would make contact. But that makes sense. Thanks for the info.

    99.999% of all anomalies on coins are damage. There are a limited number of ways that an actual mint error or variety can be made.

    Respectfully, you are approaching this backwards. Don't look at coins and find anomalies which you then try to categorize. Look at real, certified errors and study the coin references and then the actual errors will jump out at you.

    Try error-ref.com or varietyvista.com

    I appreciate that JM!! Probably the best advice I received. Thank you.

    We call him Lanza. Also, it's ok to disagree with him. He likes that.

    You should also accuse me of picking fights and being arrogant.

    Memes help.

  • Morgan WhiteMorgan White Posts: 9,163 ✭✭✭✭✭

    @jmlanzaf said:

    @Morgan White said:

    @Monchis1679 said:

    @jmlanzaf said:

    I do not comprehend what you are saying. I also see nothing of note in the shield area.
    If you take a nice uncirculated half and smack the edge reeds onto another half in a flat area…viola
    You can see reed hits on larger coins like halves and large dollar coins if you look at enough of them.
    I suspect these types of hits happen at the mint, in bags, or when dropped into a roll or tube.

    I pretty much overlaid another Kennedy over that area to see if it would make contact. But that makes sense. Thanks for the info.

    99.999% of all anomalies on coins are damage. There are a limited number of ways that an actual mint error or variety can be made.

    Respectfully, you are approaching this backwards. Don't look at coins and find anomalies which you then try to categorize. Look at real, certified errors and study the coin references and then the actual errors will jump out at you.

    Try error-ref.com or varietyvista.com

    I appreciate that JM!! Probably the best advice I received. Thank you.

    We call him Lanza. Also, it's ok to disagree with him. He likes that.

    You should also accuse me of picking fights and being arrogant.

    Memes help.

    You're confusing me with some of your more strident fans.

    I only implied that you like to play devil's advocate.

    I'll be glad to meme you though.

  • jmlanzafjmlanzaf Posts: 36,735 ✭✭✭✭✭

    @Morgan White said:

    @jmlanzaf said:

    @Morgan White said:

    @Monchis1679 said:

    @jmlanzaf said:

    I do not comprehend what you are saying. I also see nothing of note in the shield area.
    If you take a nice uncirculated half and smack the edge reeds onto another half in a flat area…viola
    You can see reed hits on larger coins like halves and large dollar coins if you look at enough of them.
    I suspect these types of hits happen at the mint, in bags, or when dropped into a roll or tube.

    I pretty much overlaid another Kennedy over that area to see if it would make contact. But that makes sense. Thanks for the info.

    99.999% of all anomalies on coins are damage. There are a limited number of ways that an actual mint error or variety can be made.

    Respectfully, you are approaching this backwards. Don't look at coins and find anomalies which you then try to categorize. Look at real, certified errors and study the coin references and then the actual errors will jump out at you.

    Try error-ref.com or varietyvista.com

    I appreciate that JM!! Probably the best advice I received. Thank you.

    We call him Lanza. Also, it's ok to disagree with him. He likes that.

    You should also accuse me of picking fights and being arrogant.

    Memes help.

    You're confusing me with some of your more strident fans.

    I only implied that you like to play devil's advocate.

    I'll be glad to meme you though.

    That was more a generic "you" than a specific "you". I want to make sure the newbie gets the entire playback. 😉

  • Morgan WhiteMorgan White Posts: 9,163 ✭✭✭✭✭

    @jmlanzaf said:

    @Morgan White said:

    @jmlanzaf said:

    @Morgan White said:

    @Monchis1679 said:

    @jmlanzaf said:

    I do not comprehend what you are saying. I also see nothing of note in the shield area.
    If you take a nice uncirculated half and smack the edge reeds onto another half in a flat area…viola
    You can see reed hits on larger coins like halves and large dollar coins if you look at enough of them.
    I suspect these types of hits happen at the mint, in bags, or when dropped into a roll or tube.

    I pretty much overlaid another Kennedy over that area to see if it would make contact. But that makes sense. Thanks for the info.

    99.999% of all anomalies on coins are damage. There are a limited number of ways that an actual mint error or variety can be made.

    Respectfully, you are approaching this backwards. Don't look at coins and find anomalies which you then try to categorize. Look at real, certified errors and study the coin references and then the actual errors will jump out at you.

    Try error-ref.com or varietyvista.com

    I appreciate that JM!! Probably the best advice I received. Thank you.

    We call him Lanza. Also, it's ok to disagree with him. He likes that.

    You should also accuse me of picking fights and being arrogant.

    Memes help.

    You're confusing me with some of your more strident fans.

    I only implied that you like to play devil's advocate.

    I'll be glad to meme you though.

    That was more a generic "you" than a specific "you". I want to make sure the newbie gets the entire playback. 😉

  • jmlanzafjmlanzaf Posts: 36,735 ✭✭✭✭✭

    @Morgan White said:

    @jmlanzaf said:

    @Morgan White said:

    @jmlanzaf said:

    @Morgan White said:

    @Monchis1679 said:

    @jmlanzaf said:

    I do not comprehend what you are saying. I also see nothing of note in the shield area.
    If you take a nice uncirculated half and smack the edge reeds onto another half in a flat area…viola
    You can see reed hits on larger coins like halves and large dollar coins if you look at enough of them.
    I suspect these types of hits happen at the mint, in bags, or when dropped into a roll or tube.

    I pretty much overlaid another Kennedy over that area to see if it would make contact. But that makes sense. Thanks for the info.

    99.999% of all anomalies on coins are damage. There are a limited number of ways that an actual mint error or variety can be made.

    Respectfully, you are approaching this backwards. Don't look at coins and find anomalies which you then try to categorize. Look at real, certified errors and study the coin references and then the actual errors will jump out at you.

    Try error-ref.com or varietyvista.com

    I appreciate that JM!! Probably the best advice I received. Thank you.

    We call him Lanza. Also, it's ok to disagree with him. He likes that.

    You should also accuse me of picking fights and being arrogant.

    Memes help.

    You're confusing me with some of your more strident fans.

    I only implied that you like to play devil's advocate.

    I'll be glad to meme you though.

    That was more a generic "you" than a specific "you". I want to make sure the newbie gets the entire playback. 😉

    Now we're back on track

Leave a Comment

BoldItalicStrikethroughOrdered listUnordered list
Emoji
Image
Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights
Drop image/file