New Washington Quarter Album Toners!
DaRigMan04
Posts: 126 ✭✭✭
Thought I'd share two Washington Quarter Album Toners I obtained Raw from an album. The 1946-S Is by far my favorite Toner I've ever had! As I compile specimens to send in soon to PCGS this may potentially end up getting slabbed.
Tagged:
2
Comments
Ok, now that I've spent ten minutes in imgur browsing all the "other?" stuff. I'd like that time back please.
Nice quarters though.
Please take this comment with an enormous grain of sand as I have not seen the coin in-had at all and I think what I am seeing might be due to the lighting used. However, even though the 1946-S WQ as an issue can come with fabulous toning, I don't know if I would be comfortable with how I am interpreting the color on this coin because of the quality or depth of the violet-blue toning along the edge in combination with what might be crackle-type toning throughout the coin.
In the mid or late 1990s this combination started to pop up on commems and PCGS and NGC quickly came down as AT. They still appear, and also appear on Franklins and WQs, but there was a kind of "look" that many of these had that this is reminiscent of. Again, I would not be shocked to be wildly off-base here given lighting can do lots of things to images.
In honor of the memory of Cpl. Michael E. Thompson
Here are some closer up photos. (Not in slab just placed ontop of one)
I know of that which Tom is talking about. There were also a flurry of classic commemoratives that offered the same type/kind of toning. (Many were subsequently housed in SEGS holders.)
Even so, and with that stated, I love the overall look and presentation and turning a bit of a blind eye toward the reality I'd rather live in the possibility and do think there is a chance- not a likelyhood- yet a chance your coins will holder and slab with PCGS if that is your desire.
Otherwise, in a Dansco home, the overall presentation would remain magnificent and without the months of worry and eventual consternation ending at the results of certification.
peacockcoins
Very nice quarter with a fun album toned look. Shockingly toned? No. A solid 'somewhat-premium' example? Yes.
I "specialize" and search for the common-date and pretty toners of all types. If this one was valued at "X" (in a GSB world), I can see it being listed for "X" + 20%. That type of toning and piece . . . . .
Drunner
Update ! It was sent off to get graded. I actually stumbled upon this in the Washington Quarter Registry page. Coincidently also a 1946-S! Really reminds me of the coin I have, especially the reverse purple tone!
Good luck with your submission!
In honor of the memory of Cpl. Michael E. Thompson
Thanks! Will share an update in a couple of weeks!
I found this hidden Gem few weeks back ! Gonna crack it out. Most Likely been preserved in that glass or resin since 1971 ! Guessing from an Original 1946 Bank Roll !
Be aware that coins dropped into Lucite can appear far nicer while entombed than they are when broken out. I would guess that might be due to the acrylic filling in any nooks and crannies on the coin and essentially smoothing out the surfaces as we see them. I'm not saying the coin will be a gashed-up dog, but I am saying it might not be as pristine after the fact.
In honor of the memory of Cpl. Michael E. Thompson
Gotcha, have you seen stuff like this before? My first time I've come across something like this from many decades ago.
I've seen two coins in-hand that were in Lucite and then broken out. Both looked a little less spiffy once freed from their acrylic tomb. This does not mean that it will always be this way, but my very limited experience tells me it is a possibility.
In honor of the memory of Cpl. Michael E. Thompson
What is your plan for cracking that quarter out?
No Clue yet, but open to suggestions ! Never done it before ha
Soak it in acetone. If you have a bandsaw you can remove much of the plastic and save lots of time.
I remember that. Bob Cambell showed it in a presentation on toning. Most of the coins were commemoratives. As I remember, it looked nothing like this. The colors were "block-like" - pastels to brown.
I remember past threads discussing similar situations. I can not use the search here well enough to find them. Some talked about acrylic and using solvents to dissolve.
How much acetone would be needed to free this?
Update... I underestimated how hard it would be to get this out lol. So now it remains in a bath of acetone. I tried drilling holes around the coin just to get rid of as much as I could. The coin is definitely a beaut though ! Take into account in the photos below there were lots of scuffs on the surface of the acrylic.
It seems like an awful lot of environmental damage (bath of acetone solvent) just to try to get a quarter out of Lucite…
In honor of the memory of Cpl. Michael E. Thompson
I was thinking band saw to make into small square and then either press or vice to make shatter. The problem is could damage coin and make more nicks. Keep us updated on progress.
eh its encased in it, unless the acetone is absorbed into that deep layer the coin sits in, should be fine? Softening the outer layer since this piece is thick. I want it out, been trapped in there for over 50 yrs!
Update, Its almost there! What a pain in the A** but a neat experience. Patience is key. The coin is slightly exposed now on the rim and partial part of the reverse. I will be taking extreme careful steps to ensure I do not damage it in the process now that its exposed. Looks very lustrous ! It sits in an acetone bath for another hour or two before I can hopefully set it free for the first time in over 50 yrs.
So close but yet so far away..................
"When they can't find anything wrong with you, they create it!"
Its been freed after 54 years in acrylic !
Very cool!
That is actually my coin. LOL. I really like my coin, I purchased it off eBay raw. I wish it was an MS-67 though
Here is my Washington Quarter Variety Registry Set
This is my Washington Quarter Proof Variety Registry Set