Plastic Team Bags for PSA Slab / Holder
dytch2220
Posts: 1,681 ✭✭✭
I know I've seen previous posts with links to these bags before since I've been contributing on the forum, however, when I search I'm only finding very old posts with product links that don't work or with products that weren't reviewed well by the board. I'm looking for a bag that fits a card in PSA holder to protect from scratches. Ideally a good quality, well fitted, clear bag with a functioning adhesive on the back. I would appreciate any suggestions that meet this criteria.
The N8 Collection: PSA Registry Sets & Showcases
0
Comments
Commissions
Check out my Facebook page
<< <i>Thanks for the reply. It's not that I can't find any available. Was hoping to get some input on which were good (see criteria) so I didn't have to go around buying several types to find something I'd be satisfied with. >>
OK. The biggest issue you will find is that all of these are designed for PSA, BGS and SGC, so they tend to run big on PSA slabs since they are the smallest. If you want truly snug (i.e. well fitted) on PSA slabs, I am not sure what to suggest, as I haven't seen any.
Commissions
Check out my Facebook page
Perfect fit
I've bought several times from this seller. They fit perfectly and were made only for PSA slabs. I also use them for top loaders,
mag-tite holders. I think some of the older threads were about a sewing site that sold bags for housing pins and needles and trying to
figure out the perfect size.
These are more expensive than your standard sleeves but are awesome! Matt Miller (mbmiller) turned me on to these. I sure do miss him on the boards.
<< <i>Hands down, this is the best one you'll ever find.
Perfect fit
I've bought several times from this seller. They fit perfectly and were made only for PSA slabs. I also use them for top loaders,
mag-tite holders. I think some of the older threads were about a sewing site that sold bags for housing pins and needles and trying to
figure out the perfect size. >>
Hey Nate, these sleeves that Dan linked look awesome! 100 is more than I need, but I'd buy a max of 200, if you want to buy them and split the 800 with me....
He also sells 1 pack (100 sleeves) if that's all you're looking for. Just check his other items.
Everyone else who has listed a link; those are all too big. All those Ultra Pro were made for SGC, PSA, and BGS and all have excessive room left over and look horrible.
The one I listed is ONLY made for PSA slabs, and you will have no extra room on the sides or top.
i also seem to remember there being a better quality soft sleeve as well. Anyone else remember what I'm talking about?
WTB: PSA 1 - PSA 3 Centered, High Eye Appeal 1950's Mantle
Ultrapro and most of the others are very loose fitting.
Now I found Cardboard Gold resealable team bags 100 count
They are the tightest fitting I have found. Variation in sizing like all the others...but they fit tighter than all the others.
Plus decent thickness and clarity. They keep case scratch free. I never peel adhesive tape and just put card in.
They fit newer cases even better.
1948-76 Topps FB Sets
FB & BB HOF Player sets
1948-1993 NY Yankee Team Sets
<< <i>Hands down, this is the best one you'll ever find.
Perfect fit
I've bought several times from this seller. They fit perfectly and were made only for PSA slabs. I also use them for top loaders,
mag-tite holders. I think some of the older threads were about a sewing site that sold bags for housing pins and needles and trying to
figure out the perfect size. >>
I will give these a shot and see how I like them, thank you.
Edit: Oh yeah, love the icon. It reminds me of a long time ago in the early 90's when I used to chat on #efnet//irc. I recall that photo becoming popular for the first time back then, lol.
<< <i>Link
These are more expensive than your standard sleeves but are awesome! Matt Miller (mbmiller) turned me on to these. I sure do miss him on the boards. >>
Holy cow, that's like a graded card coozy! A little more than I was looking for but thanks for the link.
<< <i>Link
These are more expensive than your standard sleeves but are awesome! Matt Miller (mbmiller) turned me on to these. I sure do miss him on the boards. >>
but you can't see the cards!
WTB: PSA 1 - PSA 3 Centered, High Eye Appeal 1950's Mantle
<< <i>
<< <i>Link
These are more expensive than your standard sleeves but are awesome! Matt Miller (mbmiller) turned me on to these. I sure do miss him on the boards. >>
but you can't see the cards!
True but they have the open window sleeves also
who may want to group order the Vinyl/Felt slab cases mentioned above
so I started another thread linked below. Trying to see if there is enough
interest to order the 200
Link to Order interest thread
http://www.ebay.com/itm/310993032489?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT
other then the "snugness", hows the clarity of the plastic? can't tell from the listing pics
WTB: PSA 1 - PSA 3 Centered, High Eye Appeal 1950's Mantle
1994 Pro Line Live
TheDallasCowboyBackfieldProject
<< <i>anyone order these?
http://www.ebay.com/itm/310993032489?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT
other then the "snugness", hows the clarity of the plastic? can't tell from the listing pics >>
DanBessette told me he ordered 100. I figured I'd wait for his review to pull the trigger.
I've got 10 packs myself. Clarity and fit are superb. He'll let you have 8 packs at $30 which is the lowest he'll take on his make offer/ BIN plus $7 shipping. That comes out to less than $5 per pack. That's the better deal.
<< <i>Get them while you can. Scott from allstarsportscards is the only one that carries these PSA sleeves.
I've got 10 packs myself. Clarity and fit are superb. He'll let you have 8 packs at $30 which is the lowest he'll take on his BIN plus $7 shipping.
That comes out to less than $5 per pack. That's the better deal. >>
Good to know on the BO. Thanks.
To be honest, no direction, but...
1966-69 Topps EX+
1975 minis NrMt Kelloggs PSA 9
All Topps Heritage-Master Sets
<< <i>I just took the plunge on 800 of these bad boys with some of my eBay bucks. I haven't counted, but I can't have more than 300 or so graded cards, so this should do for a while. Looking forward to them. How do they fit over the new slabs? I feel like the new slabs are slightly larger than the older ones (the top back ridge of the slab sticks out further). >>
The new slabs are definitely thicker. They no longer fit into those little blue boxes that PSA sells or sold on their website. I assume the bag fit will be a little tighter. I'll be ordering some here in a couple of days when my PP hits.
Anyway, I have 400 extra bags (4 packs of 100 each). I will sell them for $20 delivered if anyone wants them. This is right along the same best offer price on ebay. However, I will include shipping for free. Let me know if interested.
<< <i>Hands down, this is the best one you'll ever find.
Perfect fit
I've bought several times from this seller. They fit perfectly and were made only for PSA slabs. I also use them for top loaders,
mag-tite holders. I think some of the older threads were about a sewing site that sold bags for housing pins and needles and trying to
figure out the perfect size. >>
<< <i>Get them while you can. Scott from allstarsportscards is the only one that carries these PSA sleeves.
I've got 10 packs myself. Clarity and fit are superb. He'll let you have 8 packs at $30 which is the lowest he'll take on his make offer/ BIN plus $7 shipping. That comes out to less than $5 per pack. That's the better deal. >>
I just wanted to come back and say after having gotten these, that they fit perfectly, are of good quality and clarity with a solid adhesive. This is exactly what I was looking for. Thank you rabbitpunch for the link and EagleEyeKid for the lowdown on the $$ deal.
<< <i>Hands down, this is the best one you'll ever find.
Perfect fit
I've bought several times from this seller. They fit perfectly and were made only for PSA slabs. I also use them for top loaders,
mag-tite holders. I think some of the older threads were about a sewing site that sold bags for housing pins and needles and trying to
figure out the perfect size. >>
I bought these on this recommendation and they are awesome. They really are a perfect for for just about any psa card. I will look forward to filling the 800 bags I ordered
WTB: PSA 1 - PSA 3 Centered, High Eye Appeal 1950's Mantle
<< <i>ok, just pulled the trigger on the 8-pack. my eBay Buck Cert expires next week, had to use it >>
Good call. I think you'll be very pleased with these.
<< <i>
<< <i>ok, just pulled the trigger on the 8-pack. my eBay Buck Cert expires next week, had to use it >>
Good call. I think you'll be very pleased with these. >>
You will be.
Both slabs are of the new variety, New bag on the left, Traditional Bag on the right
WTB: PSA 1 - PSA 3 Centered, High Eye Appeal 1950's Mantle