Options
What is the best way to clean wheaties

What is the best way to clean wheat pennies and is there any danger.
1911s-vdb, sorry 1909s vdb
For example
Joe
1911s-vdb, sorry 1909s vdb
For example
Joe
0
Comments
<< <i>I am philosophically opposed to coin cleaning. >>
This one has green slime on it.
Isn't there a safe way to remove it.
Joe
42/92
Joe--typo error
Dennis
Like VOC Numismatics on facebook
<< <i>1911s-vdb >>
????
The green slime might be corrosion, also copper is very difficult if not impossible to clean with out totally ruining it. Post a pic if you can.
<< <i>Send it to NCS
Dennis >>
Yeah, try NCS... then you can have them forward to NGC if it's suitable for slabbing...
42/92
If it is PVC you need to do something about it because it will continue to corrode the coin. This is the one exception to my "coin cleaning philosophy".
Jeremy
Ask a local dealer or collector for some help.
be in a well ventilated when using acetone
You don't want to play around with a coin of this value.
Know what you are dealing with before doing anything.
But don't do this to a rare or valuable coin by any means.
I will try to get a pic tonight--I do not have the coin in hand.
Sounds like the best deal is NCS----NGC graded and take it from there
Joe
Ever clean the ka-ka off your battery terminal? They're usually made of copper, right and get full of acid- huh? What do you use to clean a battery terminal with. Forget the brush but you usually use Baking soda or even good old fashioned Coca Cola When you are through, make sure to rinse it really well and dry it either with a blow dryer on medium or gently "pat" it dry! Don't RUB!
SEND IT TO ME AND i'LL CLEAN IT THE ACCEPTABLE WAY AND NOT INFLICT ANY DAMAGE! One more thing- when you're thru tith the battery what do you usuall do to the terminal and the posts BEFORE putting it all back together? You take Grease...as in Grease gun and put it all over posts and terminals right? Same theory her except use very light mineral oil or sewing machine oil. BYE-BYE GREEN Ka-Ka and it won't be back.
SPECIAL OF THE DAY.....NO CHARGE! Holiday
All you have to do is break out the orbital sander. Start with about 60 grit and work down to about 600 grit, then go to extra fine steel wool and finally finish with a buffing tool used by the gals to make their nails shiny. ( I tried my wifes buffer and now I got purdy nails) When you are done you should have a perfectly smooth and relfective surface.. Very purdy indeed.
<< <i>Ah forget wat all these yahoos are saying!!!!
All you have to do is break out the orbital sander. Start with about 60 grit and work down to about 600 grit, then go to extra fine steel wool and finally finish with a buffing tool used by the gals to make their nails shiny. ( I tried my wifes buffer and now I got purdy nails) When you are done you should have a perfectly smooth and relfective surface.. Very purdy indeed.
David