A tutorial, please

SOM · January 20, 2009 9:16AM

It's pretty easy to "crack out" cards from PSA holders, but are there any instructions anywhere on how to do it for GAI, SCD, and the toughest one: Beckett? I've bloodied enough fingers already!

Thanks!

Nick

lsutigers1973 · January 20, 2009 9:20AM

There is a detailed thread with pictures on here somewhere. I just use needle nose pliers and crack a top corner off then pry it open with a flathead screwdriver.

Barfvader · January 20, 2009 9:23AM

These should be able to get the cards out. No guarantees what they will look like when your done.

DavidPuddy · January 20, 2009 9:27AM

wow, You will not need those.

I just use a small flat head screwdriver. Insert it into the crack in the case; run it all the way around while twisting slightly.
Usually it works great.

lawnmowerman · January 20, 2009 9:27AM

That log splitter is awesome!

lsutigers1973 · January 20, 2009 9:28AM

Beautiful hardwood floor Jeff.

WinPitcher · January 20, 2009 9:51AM

For those hard to crack slabs I put the slab in a vice (protected with paper or something) and I hacksaw
off one end. I then pry open the slab with a screw driver.

I pry the slab over my bed or some other soft surface. That way if it falls it falls there.

Steve

Barfvader · January 20, 2009 9:54AM

<< <i>Beautiful hardwood floor Jeff. >>

Thanks Bill. We get a lot of compliments on it as the entryway to the house is in the same room. It's a little scratched up as the previous owner had a BIG Saint Bernard so will have to redo it sometime.

And that manual wood splitter can tear through some seriously large and nasty pieces of wood.

SlAt · January 20, 2009 9:56AM

I use a bandsaw, I picked up at a garage sale, cut 3 sides bring in the house and it opens by hand.

-John

A tutorial, please

Comments