How long does it take a coin to develop PVC damage?
![ajaan](https://us.v-cdn.net/6027503/uploads/userpics/M0CW62A1WXDL/nBT4B7FCESALB.gif)
Let's say you put a coin in a PVC flip. How long before signs of PVC contamination?
DPOTD-3
'Emancipate yourselves from mental slavery'
CU #3245 B.N.A. #428
Don
0
Comments
Experience the World through Numismatics...it's more than you can imagine.
I made a huge mistake of putting a portion of my collection in my parents attic while I went off to grad school. When I came home and checked (while sweating to death in the 120 degree heat of the attic) all of my coins turned into PVC farms. There was green growing from all over. It was horrible. Luckily it was alot of junkier stuff and the good stuff was saved with acetone.
So it can happen over the course of months to a year, but I have seen coins in PVC flips for a number of years that were still okay. I will never take the chance of using them again.
The silver, however, was only slightly "sticky" with no evidence of surface damage after a bath in xylene. A few silver pieces weren't sticky but just smelled funny, so I bathed them, too.
These coins were all stored in a garage in the high desert area of New Mexico ... very little humidity, but loads of summer heat. Oddly, the more recent copper coins (20th century stuff mostly) suffered the most damage, while the 17th thru 19th century coppers were in much better shape.
My OmniCoin Collection
My BankNoteBank Collection
Tom, formerly in Albuquerque, NM.
<< <i>Oddly, the more recent copper coins (20th century stuff mostly) suffered the most damage, while the 17th thru 19th century coppers were in much better shape >>
The later suff is made from bronze, the earlier is copper. Maybe bronze is affected by PVC more than copper?
DPOTD-3
'Emancipate yourselves from mental slavery'
CU #3245 B.N.A. #428
Don
<< <i>
<< <i>Oddly, the more recent copper coins (20th century stuff mostly) suffered the most damage, while the 17th thru 19th century coppers were in much better shape >>
The later suff is made from bronze, the earlier is copper. Maybe bronze is affected by PVC more than copper? >>
Or perhaps the natural toning/patina helped save them.
WNC Coins, LLC
1987-C Hendersonville Road
Asheville, NC 28803
wnccoins.com
<< <i>
<< <i>Oddly, the more recent copper coins (20th century stuff mostly) suffered the most damage, while the 17th thru 19th century coppers were in much better shape >>
The later suff is made from bronze, the earlier is copper. Maybe bronze is affected by PVC more than copper? >>
That just might explain it
My OmniCoin Collection
My BankNoteBank Collection
Tom, formerly in Albuquerque, NM.
Although I do not recommend it, storing coins in PVC flips in a very cold, dry place would likely not harm them for some time. I should try running an experiment with some 1967 Brit pennies and PVC in my "spare time."
Or perhaps the natural toning/patina helped save them.
Excellent possibility. Many metal oxides and nitrides afford protection to the underlying metal. One example is aluminium (sylvestius would pronounce this "al-yoo-min-yum"), which in its pure form reacts quickly, is protected from attack by its oxide.
Similar concerns with PVC exist in industry where thin metal layers are deposited. PVC is used to reduce static electricity discharges, but its outgassing in humid environments can corrode these same films very quickly.
WNC Coins, LLC
1987-C Hendersonville Road
Asheville, NC 28803
wnccoins.com
WNC Coins, LLC
1987-C Hendersonville Road
Asheville, NC 28803
wnccoins.com
I received 5 silver coins today,from a Swiss seller that have obviously PVC on them.No evidence of damage after close inspection, just that green colour. I'm not at all experienced with this subject, other than reading the informative posts here. From what I understand, I need to give them an acetone bath, right? For how long? And do I just leave them to dry afterwards?
Please note that the coins are choice to gem unc, nothing expensive, but nice shiny coins and I wouldn't want the luster to go away. One of them just smells, not bad, but this soft plastic flip smell, so I think it needs the same treatment.
Also, I don't think I have any access to any sophisticated solutions, other than acetone. Any help will be greatly appreciated.
myEbay
DPOTD 3
<< <i>Let's say you put a coin in a PVC flip. How long before signs of PVC contamination? >>
The topic question asked about PVC DAMAGE, the first post asked about PVC CONTAMINATION. They are not the same thing. You put a coin into a flip that has stated to have its plasticizer leach out and you have PVC contamination bang right now. But depending on how the coin is stored, even in that flip, damage may occur in just a few weeks, months, years, or even never.